You may also like
Eaton B-Line series wireway cross fitting, Lay-in, Wireway cross fitting, NEMA 1, Steel, ANSI 61 gray painted, 2.5" X 2.5"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 2.5 in
- Product Length Depth:
- 8.5 in
- Product Weight:
- 2.312 lb
- Product Width:
- 2.5 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Wireway cross fitting
- Product Details:
- Wireway cross fitting
- Product Material:
- Steel
B-LINE 22 X – Frequently Asked Questions
1) Will the B-Line 22 X cross fitting fit 2-1/2 inch square wireway?
Yes. The Eaton B-Line 22 X is sized for 2.5 inch by 2.5 inch wireway, with a 2.5 inch height and 2.5 inch width on each opening. It will not mate with 4x4 or 6x6 trough; those need the matching cross in that size.
2) Is this wireway cross rated for outdoor or wet locations?
No. The 22 X cross is a NEMA 1 enclosure, which is indoor, general purpose only, protecting against incidental contact and falling dirt. For rooftop, exterior, or washdown runs you need a NEMA 3R or 4 rated raintight wireway fitting instead.
3) Does this cross let you lay conductors in, or do you have to pull them through?
It is a lay-in fitting. The cover comes off so conductors drop straight into the trough at the intersection instead of being pulled through, which is why four-way wireway runs go in faster than conduit at a junction.
4) How much room do I need on the wall for this four-way wireway fitting?
Plan on 8.5 inches of overall run length for the fitting body, with 2.5 inch openings on each of the four sides. It weighs 2.312 lb, so a single hanger or strut clip at the intersection handles it before the trough sections are landed.
5) Should I use a cross fitting or two tees where four wireway runs meet?
Use the cross when four runs actually intersect at one point. The 22 X gives you a single 2.5 inch lay-in body with openings on all four sides, so conductors turn in any direction without a second fitting and without an extra short trough section between two tees. If only three runs meet, a tee in the same 2.5 inch size is the right part.
6) What is the B-Line 22 X cross fitting made of and how is it finished?
Steel, painted ANSI 61 gray. That is the standard gray used across B-Line wireway and most industrial electrical enclosures, so it matches adjacent trough sections and panel gear in a typical plant or mechanical room.
How fast can I get the B-LINE 22 X delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 22 X come with a warranty?
Absolutely. The B-LINE 22 X is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 22 X?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 22 X from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.