You may also like
Eaton B-Line series wireway cross fitting, Lay-in, Wireway cross fitting, NEMA 1, Steel, ANSI 61 gray painted, 3" X 3"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 3 in
- Product Length Depth:
- 11.24 in
- Product Weight:
- 4.09 lb
- Product Width:
- 3 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Wireway cross fitting
- Product Details:
- Wireway cross fitting
- Product Material:
- Steel
B-LINE 33 X – Frequently Asked Questions
1) Will the B-Line 33 X cross fitting connect to 3 inch by 3 inch wireway?
Yes. The Eaton B-Line 33 X is sized 3 in by 3 in, so it mates with 3 x 3 lay-in wireway runs. Overall length/depth of the fitting is 11.24 in, which is the space you need to allow at the intersection when laying out the run.
2) Is this B-Line wireway cross fitting rated for outdoor or wet locations?
No. The 33 X is a NEMA 1 enclosure type, which is indoor, general purpose only. It offers no protection against rain, washdown, or dust. For an outdoor run you need a NEMA 3R rated wireway and matching cross fitting instead.
3) What does lay-in mean on a wireway cross fitting, and does it make pulling conductors easier?
Lay-in construction means the cover comes off and conductors drop straight into the trough rather than being pulled through. On the 33 X cross, that lets you set wire into all four legs of the intersection by hand, then close the cover. It is the reason installers use wireway instead of conduit on dense feeder and control runs.
4) Is the B-Line 33 X UL Listed?
Yes, the 33 X cross fitting is UL Listed, which is what most inspectors and institutional specs call for on a NEMA 1 wireway system.
5) When do I need a wireway cross instead of a tee?
Use the cross when four wireway runs meet at one point, for example a main trough running past a panel with branches going both left and right. A tee handles three legs. The B-Line 33 X is the four-way version in 3 x 3.
6) What part number do I order for the B-Line 3 inch lay-in wireway cross?
Order Eaton B-Line model 33 X. That is the NEMA 1 steel, ANSI 61 gray, 3 in by 3 in lay-in cross fitting.
7) What is the 33 X wireway cross made of and how is it finished?
Steel, with an ANSI 61 gray painted finish. That is the same standard gray used across B-Line wireway and most switchgear, so a four-way intersection built with it matches the rest of an indoor electrical room without touch-up.
8) How heavy is the 3x3 wireway cross fitting for overhead support planning?
The 33 X weighs 4.09 lb on its own. Light enough for one person to hold at the intersection, but the trough legs feeding it still need their own hangers, since the fitting is not a support point.
How fast can I get the B-LINE 33 X delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 33 X come with a warranty?
Absolutely. The B-LINE 33 X is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 33 X?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 33 X from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.