You may also like
Eaton B-Line series wireway cross fitting, Lay-in, Wireway cross fitting, NEMA 1, Steel, ANSI 61 gray painted finish, 12" X 12"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 12 in
- Product Length Depth:
- 21.5 in
- Product Weight:
- 18.847 lb
- Product Width:
- 12 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Wireway cross fitting
- Product Details:
- Wireway cross fitting
- Product Material:
- Steel
- Product Length:
- 21.5 in
B-LINE 1212 HSX – Frequently Asked Questions
1) How much space do I need to allow for a 12 x 12 wireway cross fitting?
Allow 21.5 inches across the fitting body, with 12 inch openings on each of the four faces. That overall 21.5 inch dimension is what you subtract from the straight duct lengths on either side when you lay out a four-way intersection, so measure to the centerline of the crossing run before cutting.
2) Is the B-Line 1212 HSX rated for outdoor or wet locations?
No. It is a NEMA Type 1 enclosure, which is indoor, general purpose only, giving protection against incidental contact with the enclosed wiring and falling dirt. For rooftops, washdown areas, or anywhere water is present, you need a raintight Type 3R wireway cross instead.
3) Is this wireway cross UL Listed for use on an inspected commercial job?
The 1212 HSX cross fitting is UL Listed. That matters on institutional and commercial installs where the inspector wants listed wireway components throughout the run, fittings included, not just the straight sections.
4) What does lay-in mean on this B-Line cross fitting, and why choose it over a pull-in style?
Lay-in means the cover comes off so conductors drop straight into the trough instead of being pulled through. On a four-way intersection with heavy feeders, that saves a lot of labor, since you can set the wire into the cross and cover it rather than fishing each run through a closed fitting. It is the usual choice for lay-in wireway systems where the whole run is opened for wire installation.
5) What finish and material is the B-Line 1212 HSX wireway cross?
Steel with an ANSI 61 gray painted finish, which is the standard gray used across most industrial wireway and switchgear, so it will match existing B-Line trough and typical panel equipment in a mechanical or electrical room. It is painted steel, not stainless or galvanized, so keep it out of corrosive environments.
6) What is the part number to order this B-Line four-way wireway fitting?
Order Eaton B-Line model 1212 HSX. It is the 12 inch by 12 inch NEMA 1 lay-in steel cross fitting in ANSI 61 gray.
How fast can I get the B-LINE 1212 HSX delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 1212 HSX come with a warranty?
Absolutely. The B-LINE 1212 HSX is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 1212 HSX?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 1212 HSX from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.