You may also like
Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, side opening, NEMA 1, Galvanized steel finish, 10" X 10"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Product Height:
- 10 in
- Product Length Depth:
- 14.09 in
- Product Weight:
- 12.66 lb
- Product Width:
- 10 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, side opening
- Product Details:
- 90° elbow, side opening
- Product Material:
- Galvanized steel
B-LINE 1010 L SIDE – Frequently Asked Questions
1) Will the B-Line 1010 L SIDE elbow fit my 10 x 10 wireway run?
Yes, it's sized for 10 by 10 inch lay-in wireway, with a 10 inch height and 10 inch width at the openings. It won't mate with 4x4, 6x6, or 8x8 trough without a reducer, so match the elbow to the trough size you already have in the run.
2) What is the difference between a side-opening 90 degree wireway elbow and a top-opening one?
A side opening elbow turns the run horizontally, left or right, in the same plane as the trough. That's what the 1010 L SIDE is: a 90 degree elbow with a side opening. If you need the run to change direction vertically, up or down a wall, you want a top or bottom opening elbow instead. Ordering the wrong opening means the cover won't line up with the rest of the run.
3) Is this B-Line wireway elbow rated for outdoor or wet locations?
No. It's a NEMA 1 enclosure rating, which is indoor, dry location only, for protection against incidental contact with the enclosed wiring and falling dirt. For a rooftop, a wash-down area, or anywhere exposed to water you need a NEMA 3R or 4 raintight wireway fitting instead.
4) Can I pull conductors into this elbow without threading them, or do I have to fish the corner?
It's a lay-in fitting, so the removable cover comes off and conductors drop straight into the corner. That's the point of lay-in wireway: no fishing around a 90, which is what saves the labor on a long feeder run with several turns.
5) How much clearance do I need to allow for this 10x10 elbow at the corner?
Allow 14.09 inches on the length/depth dimension, with 10 inch height and 10 inch width at the openings. Check that against the corner you're turning before you cut the straight sections, because trimming the trough after the elbow is set is the usual way this goes wrong.
6) What is the manufacturer part number for this Eaton B-Line 10x10 side opening elbow?
Order it as B-Line 1010 L SIDE, part of the Eaton B-Line wireway fitting line, NEMA 1, galvanized, 10 by 10 inch, 90 degree lay-in elbow with a side opening.
7) How heavy is this elbow, and can one person set it?
It weighs 12.66 lb, so a single installer can hold it in place, but at 10 by 10 inches it's awkward overhead. Hang or bolt the adjoining trough sections first and let them carry the elbow rather than supporting it on the cover flanges.
How fast can I get the B-LINE 1010 L SIDE delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 1010 L SIDE come with a warranty?
Absolutely. The B-LINE 1010 L SIDE is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 1010 L SIDE?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 1010 L SIDE from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.