Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, side opening, NEMA 1, Steel, ANSI 61 gray painted, 12" X 12"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 12 in
- Product Length Depth:
- 12 in
- Product Weight:
- 7.525 lb
- Product Width:
- 12 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, side opening
- Product Details:
- 90° elbow, side opening
- Product Material:
- Steel
- Product Length:
- 12 in
B-LINE 121245 HSLSIDE – Frequently Asked Questions
1) Will this B-Line elbow fit a 12 x 12 wireway run?
Yes. The Eaton B-Line 121245 HSLSIDE elbow is sized 12 x 12 inches, so it mates to 12 by 12 inch lay-in wireway trough. It will not adapt between two different trough sizes, so both legs of the run need to be 12 x 12.
2) What is the difference between a side-opening and a top-opening 90 degree wireway elbow?
The direction the run turns. This one is a side opening 90 degree elbow, so it takes a horizontal wireway run and turns it left or right in the same plane. If you need to turn up or down (horizontal into vertical), that is a different elbow. Pick the one that matches the plane of your turn, or you will end up pulling conductors around a bend the fitting was not formed for.
3) Is this wireway elbow rated for outdoor or wet locations?
No. It is a NEMA 1 enclosure rating, which is indoor general purpose protection against incidental contact and falling dirt only. For rooftops, wash-down areas, or anywhere water is present, you need a NEMA 3R or 4 raintight wireway fitting instead.
4) Is the Eaton B-Line 121245 HSLSIDE elbow UL Listed?
Yes, the 121245 HSLSIDE lay-in wireway elbow is UL Listed. That is usually what an inspector or a facility spec wants to see on a wireway fitting in a commercial or institutional install.
5) Does a lay-in wireway elbow let me drop conductors in rather than pull them through?
Yes, that is the point of it. The 121245 HSLSIDE is a lay-in fitting, so the cover comes off and conductors are laid into the elbow at the bend instead of being pulled through a closed corner. On a long run with several turns that is the difference between a one-man pull and a fight.
6) What color and material is this wireway elbow, and will it match existing gray wireway?
Steel, painted ANSI 61 gray. ANSI 61 is the standard gray used across most commercial wireway, panelboards, and enclosures, so it lines up visually with an existing gray B-Line wireway run and with typical switchgear finishes.
7) How much does this 12 x 12 wireway elbow weigh for overhead mounting?
7.525 lb. Light enough for one person to set at the corner, but the trough on either side still needs its own support; the elbow is not a structural hanger point for the run.
How fast can I get the B-LINE 121245 HSLSIDE delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 121245 HSLSIDE come with a warranty?
Absolutely. The B-LINE 121245 HSLSIDE is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 121245 HSLSIDE?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 121245 HSLSIDE from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.