You may also like
Eaton B-Line series wireway end, No knockout, Wireway end, NEMA 3R, Aluminum, 4" X 4"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 3R
- Product Height:
- 4 in
- Product Length Depth:
- 4 in
- Product Weight:
- .208 lb
- Product Width:
- 4.26 in
- Special Features:
- No knockout
- Department:
- Electrical
- Product Type:
- Wireway end
- Product Details:
- Wireway end
- Product Material:
- Aluminum
B-LINE 44-3RAHSE NK – Frequently Asked Questions
1) Will the B-Line 44-3RAHSE NK end plate fit a 4 x 4 wireway run?
Yes. The Eaton B-Line 44-3RAHSE NK is an end closure sized for 4 inch by 4 inch wireway, with a listed height of 4 inches, length/depth of 4 inches and a width of 4.26 inches (the extra width is the flange that laps the wireway body). It caps the open end of a straight section or a fitting at the termination of the run.
2) Can this wireway end be used outdoors or in a wet location?
It is built for NEMA 3R service, which covers outdoor and damp locations where rain and sleet are the concern, and it is UL Listed. Pair it only with 3R rated wireway and fittings - dropping a 3R end onto a NEMA 1 indoor run does not make the run rainproof.
3) Does the 44-3RAHSE NK end plate come with a knockout for conduit?
No knockout. The 44-3RAHSE NK is the blank version, so the end is solid aluminum with nothing to punch out. If you need to bring conduit straight out the end of the run, order the knockout version of the end plate instead, or terminate the conduit into the side of a wireway section.
4) Why choose an aluminum wireway end instead of painted steel?
Aluminum is the material here, which is the usual pick for outdoor and corrosive exposure since there is no paint film to chip and rust at the cut edge. It also keeps the part light - this end plate weighs .208 lb. Match it to aluminum 3R wireway so you are not mixing dissimilar metal at a weathered joint.
5) What does a wireway end plate actually do, and do I need one at each end of the run?
A wireway end closes off the open end of a trough so conductors are enclosed and, on a 3R run, weather stays out. Any end of the run that is not feeding into a box, panel, or another fitting needs one. The B-Line 44-3RAHSE NK covers a 4 x 4 aluminum 3R opening with no knockout, so count the open ends on your layout and order that many.
How fast can I get the B-LINE 44-3RAHSE NK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 44-3RAHSE NK come with a warranty?
Absolutely. The B-LINE 44-3RAHSE NK is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 44-3RAHSE NK?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 44-3RAHSE NK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.