B-Line Eaton series wireway reducer, HSCA adapter style connector, Wireway reducer fitting, 1, Steel, ANSI 61 gray painted, 10" X 10"

It is a 10 inch x 10 inch wireway reducer fitting, used to transition between wireway trough sizes in a NEMA 1 run. Body dimensions are 10 in height, 12 in width and 16 in length/depth, and it weighs 12.673 lb.

No. This reducer is rated NEMA Type 1, which is indoor general purpose only, giving protection against incidental contact and falling dirt but not against water, rain, or hosedown. For wet or outdoor locations you need a NEMA 3R or 4 rated wireway fitting instead.

It uses the HSCA adapter style connector, so it joins to B-Line hinged-cover screw-cover wireway of matching size using that connection method. If your run is a different manufacturer's trough or a different B-Line connector style, confirm the connector style matches before you order, since the reducer only mates with HSCA style.

Yes, the reducer is UL Listed, which is what most inspectors look for on wireway and wireway fittings in commercial work.

You need a reducer. Where a wireway run steps from one trough size to another, the reducer fitting makes the transition and keeps the enclosure closed and the NEMA 1 rating intact. Butting two different sizes leaves an open gap at the joint, which will not pass inspection. This 10 in x 10 in fitting handles that step with an HSCA adapter style connection.

Order Eaton B-Line part number 10101212 FR. That is the steel, ANSI 61 gray, NEMA 1, 10 in x 10 in wireway reducer with the HSCA adapter style connector.

Steel construction with an ANSI 61 gray painted finish, which is the standard gray used across Eaton B-Line wireway and most industrial enclosures, so it blends with an existing gray trough run.

At 12.673 lb it is a modest load on its own, but it is a rigid steel fitting carrying the weight of the trough on both sides of the transition, so support the adjoining wireway sections near the joint rather than letting the reducer carry the run.