B-Line Eaton series wiring tro...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$260.24
$249.35
B-Line Eaton series wiring trough, 2.5" height, 24" length, 2.5" width, HSNK wireway, Thru holes, No knockouts, Hinged cover, 1, Steel, Hinged, ANSI

B-Line Eaton series wiring trough, 2.5" height, 24" length, 2.5" width, HSNK wireway, Thru holes, No knockouts, Hinged cover, 1, Steel, Hinged, ANSI

(No reviews yet) Write a Review

Model: 2224 HSNK
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$260.24
$249.35
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series wiring trough, 2.5" height, 24" length, 2.5" width, HSNK wireway, Thru holes, No knockouts, Hinged cover, NEMA 1, Steel, Hinged, ANSI 61 gray, 16 gauge

Manufacturer Resources

Product Specs

Certifications:
CSA C22.2.
Closure Type:
Hinged
Finish Color:
ANSI 61 gray
Material Thickness:
16 gauge
Mounting Method:
Thru holes
Product Height:
2.5 in
Product Length Depth:
24 in
Product Weight:
4.566 lb
Product Width:
2.5 in
Special Features:
Cover is secured to the body with plated screws
Department:
Electrical
Product Type:
HSNK wireway
Product Details:
HSNK wireway
Product Length:
24 in

B-LINE 2224 HSNK – Frequently Asked Questions

1) What size is the Eaton B-Line 2224 HSNK wiring trough cross section, and how long is it?
The 2224 HSNK is a 2.5 x 2.5 inch trough, 24 inches long. That cross section is the small end of the wireway range, so it suits short gutter runs and pull sections feeding a panel or a bank of devices rather than heavy bulk conductor fill. It weighs 4.566 lb.
2) Is this B-Line wireway rated for outdoor or wet locations?
No. The 2224 HSNK is a NEMA 1 enclosure, which is indoor, general purpose protection against incidental contact and falling dirt only. For a wet or washdown area you need a NEMA 3R, 4 or 4X trough instead.
3) Does the 2224 HSNK trough come with knockouts, or do I have to drill it?
It ships with no knockouts. Every conduit entry has to be punched or drilled on site, which lets you place them exactly where the run lands but means bringing a knockout set to the job. The 16 gauge steel body punches cleanly with a standard hydraulic or ratchet punch.
4) How does the cover open on this hinged wireway, and is it screwed down?
The cover is hinged, so it swings open along one side instead of lifting off completely, which is what you want when you are pulling or landing wire single handed on a ladder. It is also secured to the body with plated screws, so the cover stays closed and captive once buttoned up.
5) How does the 2224 HSNK mount to a wall or strut?
It mounts through holes in the trough body, so you fasten directly through the back or sides into your wall anchors, strut, or backboard. No separate mounting bracket or clamp kit is part of the trough; supply your own fasteners sized to the substrate.
6) Is the Eaton B-Line 2224 HSNK certified for use in Canada?
It carries CSA C22.2 certification, which is the Canadian Electrical Code product standard series, so it can be specified on Canadian jobs as well as US work.
7) Should I use a hinged cover wireway or a screw cover type for a panel feed?
Go hinged where the trough will be opened again: junction and splice points, control panel feeds, anywhere you expect future adds. A screw cover style is fine for a run you close once and forget. The 2224 HSNK gives you both, a hinged cover that swings clear plus plated screws to secure it shut.
8) What color and finish is this wiring trough, and will it match my existing gear?
ANSI 61 gray, which is the same standard gray used on most commercial panelboards, disconnects and control enclosures, so a run of these will match adjacent gear on a wall. The body is steel at 16 gauge.
9) What is the exact part number to order this 24 inch B-Line trough?
Order Eaton B-Line part number 2224 HSNK. The numbering follows the cross section and length: 2.5 x 2.5 inch section, 24 inches long, NEMA 1 hinged steel.
How fast can I get the B-LINE 2224 HSNK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 2224 HSNK come with a warranty?
Absolutely. The B-LINE 2224 HSNK is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 2224 HSNK?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 2224 HSNK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!