Eaton B-Line series wiring trough, 6" height, 48" length, 6" width, HSNK wireway, Thru holes, No knockouts, Hinged cover, NEMA 1, Steel, Hinged, ANSI 61 gray, 16 gauge
Manufacturer Resources
Product Specs
- Certifications:
- CSA C22.2.
- Closure Type:
- Hinged
- Finish Color:
- ANSI 61 gray
- Material Thickness:
- 16 gauge
- Mounting Method:
- Thru holes
- Product Height:
- 6 in
- Product Length Depth:
- 48 in
- Product Weight:
- 19.98 lb
- Product Width:
- 6 in
- Special Features:
- Cover is secured to the body with plated screws
- Department:
- Electrical
- Product Type:
- HSNK wireway
- Product Details:
- HSNK wireway
B-LINE 6648 HSNK – Frequently Asked Questions
1) What size is the Eaton B-Line 6648 HSNK wiring trough inside?
The 6648 HSNK is a 6 x 6 inch cross section, 48 inches long. That 6 by 6 square section is what sets your wire fill capacity and lets you run conduit into either side wall without crowding the bend radius, and the 48 inch length is the standard stick for lining up multiple sections end to end.
2) Does this B-Line wireway come with knockouts, or do I have to drill my own conduit entries?
No knockouts. The 6648 HSNK body is blank steel, so every conduit entry gets punched or hole sawed where you want it. That is normal for a trough feeding a mixed bank of panels or disconnects, since you set the hole pattern to match the gear instead of working around a factory layout. Bring a knockout punch set sized for 16 gauge steel.
3) Can I use this wireway outdoors or in a washdown area?
No. The 6648 HSNK is a NEMA 1 enclosure, which is indoor general purpose only, protecting against incidental contact and falling dirt. It is not rainproof, not dusttight and not watertight. For an outdoor run, a wet location, or anywhere subject to hosedown, you need a NEMA 3R or NEMA 4 rated trough instead.
4) Is the cover on this wiring trough hinged or a lift-off?
Hinged. The cover on the 6648 HSNK stays attached to the body and swings open, then is secured shut with plated screws. For a trough you will be opening repeatedly during pulls or troubleshooting, hinged beats a screw-on lift-off cover because there is no panel to set down in the dirt or lose off a ladder.
5) Do I need anything else to join two sections of this trough together?
Yes, a 48 inch stick of the 6648 HSNK ships as a single trough section with its hinged cover. Connectors or couplings to join runs end to end, plus any elbows, tees, end plates and mounting hardware, are ordered separately and should be sized to the same 6 by 6 inch section.
6) Will this gray trough match the other B-Line and Eaton enclosures already on my job?
It is finished in ANSI 61 gray, the standard industrial enclosure gray used across most electrical gear, so it will read as a match next to typical panelboards, disconnects and other ANSI 61 troughs. Body is steel at 16 gauge.
How fast can I get the B-LINE 6648 HSNK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6648 HSNK come with a warranty?
Absolutely. The B-LINE 6648 HSNK is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6648 HSNK?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6648 HSNK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.