B-Line Eaton series wiring tro...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$776.33
B-Line Eaton series wiring trough, 8" height, 36" length, 8" width, GTGV NK wiring trough, Thru holes, No knockouts, Screw cover, 1, Galvanized steel

B-Line Eaton series wiring trough, 8" height, 36" length, 8" width, GTGV NK wiring trough, Thru holes, No knockouts, Screw cover, 1, Galvanized steel

(No reviews yet) Write a Review

Model: 8836 GTGV NK
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$776.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series wiring trough, 8" height, 36" length, 8" width, GTGV NK wiring trough, Thru holes, No knockouts, Screw cover, NEMA 1, Galvanized steel, Plated screws, Gray, 14 gauge

Manufacturer Resources

Product Specs

Certifications:
CSA C22.2.
Closure Type:
Plated screws
Finish Color:
Gray
Material Thickness:
14 gauge
Mounting Method:
Thru holes
Product Height:
8 in
Product Length Depth:
36 in
Product Weight:
24.192 lb
Product Width:
8 in
Special Features:
Cover is held secure by plated screws
Department:
Electrical
Product Type:
GTGV NK wiring trough
Product Details:
GTGV NK wiring trough
Product Length:
36 in

B-LINE 8836 GTGV NK – Frequently Asked Questions

1) What size is the Eaton B-Line 8836 GTGV NK wiring trough?
It's an 8 x 8 inch cross section, 36 inches long. That 8 by 8 interior is what determines how many conductors you can lay in and still stay inside fill rules, and the 36 inch run length matters when you are spacing it between a panel and a set of disconnects.
2) Does the 8836 GTGV NK trough come with knockouts already punched?
No. The NK designation means no knockouts, so the body ships blank and you drill or punch every conduit entry yourself to suit the job. If you want factory knockouts, you need a knockout version of the trough instead, not this one.
3) Can this wiring trough be used outdoors or in a washdown area?
No. It's a NEMA 1 enclosure, which is indoor, general purpose protection against incidental contact and falling dirt only. It has no gasket and no rain or hosedown rating, so keep it inside a dry electrical room or mechanical space. Wet or damp locations call for a NEMA 3R or 4 rated trough.
4) How does the cover come off on the B-Line 8836 GTGV NK, and is it removable for pulling wire?
It's a screw cover, held on with plated screws all the way around. You back the screws out and lift the full cover off, which gives you an open channel to lay conductors in rather than pulling them through. Plan on a driver and a few minutes per cover, unlike a hinged or latched design where you just swing it open.
5) What is the 8836 GTGV NK trough made of, and how heavy is the steel?
Galvanized steel at 14 gauge, finished gray with plated cover screws. The 14 gauge body is the reason the section stays rigid over a 36 inch span with only end support, and the galvanizing plus plated fasteners resist corrosion in typical indoor electrical rooms.
6) Is the Eaton B-Line 8836 GTGV NK certified for a Canadian job?
It carries CSA C22.2 certification, which is what an inspector on a Canadian project will be looking for on a wiring trough.
7) Is a wiring trough like this the right choice instead of running more conduit between panels?
A trough is the better call where you have a lot of conductors converging on one point, such as a bank of disconnects, meter sockets, or several panels on a common wall. Pull conduit into the trough and splice or route inside it with the cover off, then screw the cover back down. On this 8 by 8 by 36 inch NK version you set every conduit entry location yourself, so it suits a layout that doesn't match a factory knockout pattern. If you only have one or two circuits point to point, conduit alone is simpler.
How fast can I get the B-LINE 8836 GTGV NK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 8836 GTGV NK come with a warranty?
Absolutely. The B-LINE 8836 GTGV NK is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 8836 GTGV NK?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 8836 GTGV NK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!