You may also like
Eaton DH Heavy-Duty Fusible Safety Switch, Three-Pole, 600V
Model: COLL-438426-112553
Eaton
Schneider Electric DTU36 Heavy-Duty Double Throw Safety Switch 30A 600V 3-Pole NEMA 1 Non-Fusible
Model: SCHN-DTU36X
Schneider
Eaton Double-Throw Safety Switch Non-Fusible Two-Pole NEMA 3R General Duty Transfer Switch
Model: EAT-DT2
Eaton
Eaton General Duty Non-Fusible Safety Switch - 30A, 3-Pole, 240V Indoor NEMA 1 Painted Steel
Model: EAT-DG321UGB
Eaton
Eaton Heavy-Duty Non-Fusible Safety Switch, 30A
The Eaton Heavy-Duty Non-Fusible Safety Switch is a single-throw, two-pole disconnect switch rated 30A at 600V, available in a range of enclosure types to suit indoor, outdoor, and specialized installation environments. Built for reliable manual disconnect of electrical circuits, this UL Listed switch is suitable for service entrance use when a neutral or ground lug kit is installed. Its heavy-duty, non-fusible design supports commercial and industrial electrical distribution where dependable, code-compliant switching is required, making it a practical choice for electricians and facility maintenance teams alike.
Key Features
- Amperage Rating: 30A for reliable circuit disconnect in commercial and industrial applications.
- Voltage Rating: 600V maximum rating supports a wide range of distribution systems.
- Durable Construction: Rugged enclosure housing protects the switch mechanism and internal components from everyday jobsite conditions.
- Switch Type: Single-throw, two-pole configuration for straightforward manual load disconnect.
- Fuse Configuration: Non-fusible design for applications where overcurrent protection is handled elsewhere in the system.
- Enclosure Options: Available in multiple enclosure types to match indoor, outdoor, and application-specific installation requirements.
- HP Rating: Rated up to 3 HP at 240 Vac, 7.5 HP at 480 Vac, and 10 HP at 600 Vac (TD, 1 Ph), plus 15 HP at 600 Vdc, covering a broad range of motor-disconnect applications.
- Wire Configuration: Designed for 2-wire circuits.
Certifications & Compliance
- UL Listed
- Suitable for Service Entrance Use with Neutral or Ground Lug Kit Installed
Technical Specifications
- Voltage Rating: 600V
- Amperage Rating: 30A
- Number of wires: 2
Typical Applications
- Commercial and Industrial Electrical Installations
- Manual Disconnect for Motors and Equipment
- Service Entrance Switching (with Neutral or Ground Lug Kit)
- Panelboard and Load Center Disconnects
- Renovation and New Construction Electrical Distribution
- Electrical Rooms, Utility Areas, and Equipment Installations
Why Eaton?
Eaton's Heavy-Duty Non-Fusible Safety Switch combines a rugged enclosure with a UL Listed, code-compliant design built for dependable manual disconnect performance. With a 30A, 600V rating, a choice of enclosure types, and a wide HP rating range across 240V, 480V, and 600V systems, it delivers the reliable, professional-grade switching that commercial and industrial electricians expect from Eaton.
Variant Specifications
| Enclosure / NEMA Type | Model | Enclosure | SKU |
|---|---|---|---|
| NEMA 3R / 12 | Standard | 12 | DH261UDK |
| NEMA 1 | DH261UGK | Standard | DH261UGK |
| NEMA 3R / 12 | Standard | 3R | DH261URK |
Manufacturer Resources
Product Specs
- Product Height:
- 14.14 in
- Listing:
- UL Listed
- Department:
- Electrical
- Number Of Poles:
- Two-pole
- Product Type:
- Safety Switch
- Fuse configuration:
- Non-fusible
- Certifications:
- UL Listed
- Product Width:
- 8.76 in
- Voltage Rating:
- 600V
- Number of wires:
- 2
- Amperage Rating:
- 30A
- Product Length/Depth:
- 10.22 in
- Product Category:
- Heavy Duty, Non-Fusible
- Product Group:
- Wiring Devices