You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Ansi Revenue Accuracy:
- C12.20 (0.2)
- Frequency Rating:
- 60 Hz
- Input:
- 5A secondary
- Meter Type:
- Meter with integral display
- Power:
- 90-265 Vac/dc
- Sampling Rate:
- 400/cycle
- Secondary Current Input:
- 5A
- Separate Ground And Neutral Current:
- Combined
- Special Features:
- Data logging
- Terminal Type:
- Screw Terminal
- Department:
- Electrical
- Product Type:
- Meter (with integral display)
- Product Length:
- 4.85 IN
- Product Details:
- Meter (with integral display)
- Product Height:
- 4.85 IN
- Product Weight:
- 2 LB
- Product Width:
- 4.97 IN
B-LINE IQ250ML65100 – Frequently Asked Questions
1) Can the Eaton IQ 250 meter be wired directly to my service, or do I need current transformers?
The IQ 250 is a CT-connected meter. Its current input is 5A secondary, so it has to be fed from current transformers with a 5A secondary rating sized to the load you are metering. You cannot run service conductors through it directly. The CTs are a separate purchase.
2) What control voltage does the IQ 250 meter need for power?
The IQ250ML65100 runs on 90-265 Vac or dc, so it will take a standard 120 V or 208/240 V control tap, or a DC supply within that window. Frequency rating is 60 Hz.
3) Is the Eaton IQ 250 accurate enough for tenant billing or revenue metering?
Yes. The IQ 250 meets ANSI C12.20 (0.2) revenue accuracy, which is the 0.2 percent accuracy class used for billable submetering. It samples at 400 samples per cycle.
4) How much panel door space do I need to cut in for the IQ 250 meter?
Plan around a body measuring 4.85 x 4.97 x 4.85 inches, and about 2 lb of weight hanging on the door or panel. That is the standard square footprint that drops into a typical meter cutout.
5) Do I need a separate display or software to read the IQ 250?
No separate display is needed. The IQ250ML65100 is a meter with an integral display, so readings are available at the unit itself.
6) Does the Eaton IQ 250 store interval data, or does it only show live readings?
It supports data logging as a feature, but the unit is specified with no onboard memory, so treat it as a live metering and logging point rather than a device that retains long-term interval history on its own.
7) Does the IQ 250 measure ground and neutral current separately?
No. Ground and neutral current are combined on this meter. If your application requires discrete ground-fault current measurement apart from neutral, the IQ250ML65100 will not give you that separation.
8) What kind of terminations does the IQ 250 use for CT and voltage leads?
Screw terminals. Landing CT secondaries and voltage taps is a straight screw connection, so no special crimp connectors or plug-in harness is required.
9) What is the exact part number to order for the Eaton IQ 250 meter?
Order by manufacturer part number IQ250ML65100. That is the single model covered here, an Eaton IQ 250 meter with integral display.
How fast can I get the B-LINE IQ250ML65100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE IQ250ML65100 come with a warranty?
Absolutely. The B-LINE IQ250ML65100 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE IQ250ML65100?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE IQ250ML65100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.