Eaton Pull-Chain Medium Base L...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.20
Eaton Pull-Chain Medium Base Lampholder, Thermoset, White

Eaton Pull-Chain Medium Base Lampholder, Thermoset, White

(No reviews yet) Write a Review

Model: S759W-CD-SP

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Eaton Pull-Chain Medium Base Lampholder, Thermoset, White

The Eaton Pull-Chain Medium Base Lampholder is a two-piece thermoset lampholder built for reliable lamp support in residential and light commercial fixtures. Rated 250V with a 660W capacity, this white lampholder accepts #14-10 AWG wire and features a Medium base for standard incandescent and compatible lamps. Its pull-chain actuator and top-and-push wiring method make it a straightforward replacement or new-install component, and it carries cULus Listing for code-compliant performance.

Key Features

  • Durable Construction: Two-piece thermoset body resists heat and impact for long service life.
  • Medium Base: Standard Medium base accommodates common incandescent and compatible lamps.
  • Pull-Chain Actuator: Convenient pull-chain switching for easy on/off control right at the fixture.
  • Electrical Rating: Rated 250V and 660W with an allowable wire size of #14-10 AWG for compatible branch-circuit wiring.
  • Wiring Method: Top and push wiring simplifies installation and termination.
  • Torque Rating: 14 lbf-inch torque rating supports secure terminal connections.
  • Dimensions: Measures 4.626 in wide, 4.626 in high, and 2.158 in deep for a standard fixture fit.
  • Finish: White color complements a wide range of lamp and fixture finishes.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Voltage Rating: 250V
  • Product Type: Electrical Component
  • Department: Electrical
  • Base Type: Medium
  • Material: Thermoset
  • Design Type: Two-piece
  • Allowable Wire Size: #14-10 AWG
  • Wattage: 660W
  • Actuator: Pull chain

Typical Applications

  • Residential and Commercial Lighting Fixtures
  • Lamp and Fixture Assembly
  • Replacement Lampholder for Table and Floor Lamps
  • Pull-Chain Lighting Fixtures
  • Electrical Contractor and MRO Supply

Why Eaton?

Eaton builds this lampholder from durable two-piece thermoset construction with a cULus Listing, giving contractors and facility teams a dependable, code-compliant component for lighting fixture work. The 250V, 660W rating and #14-10 AWG wire compatibility make it a versatile choice across a wide range of residential and commercial lamp applications, backed by Eaton's reputation for reliable electrical components.

Manufacturer Resources

Product Specs

Product Width:
4.626 in
Torque Rating:
14 lbf-inch
Voltage Rating:
250V
Base Type:
Medium
Product Color:
White
Wiring Method:
Top and push wiring
Product Length/Depth:
2.158 in
Product Height:
4.626 in
Product Material:
Thermoset
Design Type:
Two piece
Allowable Wire Size:
#14-10 AWG
Product Wattage:
660W
Actuator:
Pull chain
Certifications:
cULus Listed
Product Type:
Lampholder
Department:
Electrical
Bulb Base:
Medium
Listing:
cULus
Product Group:
Wiring Devices
Product Subgroup:
Lampholders & Sockets
Product Length:
2.158 in
Product Weight:
0.26 lb

Eaton S759W-CD-SP – Frequently Asked Questions

1) Will this Eaton pull-chain lampholder take a standard household bulb?
Yes. The Eaton S759W-CD-SP is a medium base lampholder, which is the standard screw base used by common incandescent and compatible lamps. Wattage rating is 660W, so any ordinary medium base lamp is well inside it.
2) What wire size can I land on this pull-chain lampholder?
Terminals accept #14 through #10 AWG, so it lands standard 14 and 12 AWG branch circuit conductors without an adapter. Terminal screws are torqued to 14 lbf-inch. Wiring is top and push, so conductors enter from the top of the body.
3) Is this lampholder rated for a 120V or 277V circuit?
It carries a 250V rating, which covers standard 120V lighting branch circuits and 208/240V single-phase. It is not rated for a 277V commercial lighting circuit.
4) How much room do I need in the fixture or on the ceiling for this lampholder?
The body measures 4.626 x 4.626 x 2.158 inches, with the 2.158 inch figure given as the depth. Lay that out before committing in a tight closet or a shallow canopy, and leave clearance below for the pull chain to hang free.
5) Do I still need a wall switch if I use a pull-chain lampholder?
No. The pull chain actuator switches the lamp at the fixture itself, which is why these get used in basements, closets, attics, garages and utility rooms fed from an unswitched circuit. If the room already has a wall switch, a keyless lampholder is the simpler part.
6) Will a thermoset lampholder hold up better than a plastic one in a hot fixture?
The body is two-piece thermoset, a thermally cured material that does not soften with repeated heat cycling the way a thermoplastic can. That matters where an incandescent lamp runs long hours close to the holder.
7) What is the Eaton part number for the white pull-chain medium base lampholder?
Order Eaton S759W-CD-SP. The W in the number is the white color, and it is supplied in a single white finish.
How fast can I get the Eaton S759W-CD-SP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton S759W-CD-SP come with a warranty?
Absolutely. The Eaton S759W-CD-SP is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton S759W-CD-SP?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Eaton S759W-CD-SP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!