Cooper Wiring Devices Pull Cha...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$7.32
Cooper Wiring Devices Pull Chain Lampholder with Outlet, Thermoset

Cooper Wiring Devices Pull Chain Lampholder with Outlet, Thermoset

(No reviews yet) Write a Review

Model: S865W-SP

In Stock (leaves warehouse same day if ordered before 3pm ET)

$7.32
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Cooper Wiring Devices Pull Chain Lampholder with Outlet, Thermoset

The Cooper Wiring Devices Pull Chain Lampholder with Outlet is a rugged Thermoset lampholder rated 250V and 15A, engineered with a two-piece design for durability in demanding lighting applications. Featuring a convenient pull chain actuator, a Medium base for standard lamps, and an integrated outlet with NEMA 1-15P configuration, this lampholder supports Top and Push wiring for #14-10 AWG wire and carries a maximum wattage rating of 660W, making it a dependable choice for commercial and residential lighting circuits. Its molded Thermoset body stands up to everyday heat and wear, while the added convenience outlet lets electricians power a secondary device right at the fixture without running additional branch circuit wiring.

Key Features

  • Actuator: Convenient pull chain control provides quick, reliable on/off switching at the fixture.
  • Durable Construction: Molded Thermoset material resists heat, cracking, and impact for long-term reliability in fixture applications.
  • Wiring Method: Top and Push wiring accommodates #14-10 AWG wire, giving installers flexible field wiring options.
  • Base Type: Medium base fits standard medium-base lamps for broad compatibility.
  • Special Feature: Integrated outlet with NEMA 1-15P configuration lets you plug in a secondary device directly at the fixture.
  • Electrical Rating: Rated 250V and 15A, with a maximum wattage rating of 660W for demanding lighting loads.
  • Design Type: Two-piece design simplifies assembly and field servicing.
  • Finish: Clean White finish suits residential and light commercial fixtures alike.

Technical Specifications

  • Amperage Rating: 15A
  • Material: Thermoset
  • Voltage Rating: 250V
  • Wattage: 660W
  • Base Type: Medium
  • Nema Configuration: 1-15P
  • Wiring Method: Top and Push wiring
  • Allowable Wire Size: #14-10 AWG
  • Design Type: Two-piece
  • Color: White

Typical Applications

  • Residential and Commercial Lighting Fixtures
  • Pendant, Utility, and Fixture-Mounted Lighting
  • Basements, Garages, and Workshop Lighting
  • Storage Areas Requiring a Convenience Outlet at the Fixture
  • Renovation and New Construction Wiring Projects
  • Replacement of Worn or Outdated Lampholders

Why Cooper Wiring Devices?

Cooper Wiring Devices builds this lampholder from durable Thermoset material with a rated 250V, 15A electrical rating and a practical two-piece design, giving electrical professionals a dependable fitting for everyday lighting circuits. The added convenience outlet, pull chain actuator, and support for #14-10 AWG wire through Top and Push wiring make it a versatile, code-conscious choice for both new installations and retrofit work where reliability matters.

Manufacturer Resources

Product Specs

Voltage Rating:
250V
Actuator:
Pull chain
Wiring Method:
Top and Push wiring
Allowable Wire Size:
#14-10 AWG
Base Type:
Medium
Nema Configuration:
1-15P
Special Features:
With outlet
Amperage Rating:
15A
Product Wattage:
660W
Design Type:
Two-piece
Product Type:
Lampholder
Product Material:
Thermoset
Product Color:
White
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Lampholders & Sockets
Product Width:
4.503 in
Product Length:
2.466 in
Product Weight:
0.315 lb
Product Height:
4.503 in

Cooper Wiring Devices S865W-SP – Frequently Asked Questions

1) Can I plug a shop vac or a work light into the outlet on this lampholder?
The built-in receptacle on the Cooper S865W-SP is a NEMA 1-15 configuration, which is two-blade and ungrounded. It will accept a two-prong cord cap only, so a tool with a three-prong grounding plug will not fit. It is meant for light convenience loads at the fixture, and whatever you plug in shares the 15A circuit with the lamp. If you need a grounded outlet at the fixture, this is the wrong device.
2) What wire size can I land on the Cooper S865W-SP lampholder terminals?
It accepts #14 through #10 AWG, wired top and push. That covers the 14 AWG on a typical 15A lighting branch and the 12 AWG most commercial and garage circuits are run in, so you can tie it into an existing circuit without pigtailing down to a smaller conductor.
3) Is a 250V lampholder okay on a normal 120V circuit?
Yes. The 250V figure on the Cooper S865W-SP is the maximum the device is rated to withstand, not a required supply voltage. Running it on a standard 120V lighting branch is well inside that rating. The 15A rating is what has to match your overcurrent protection.
4) Do I need a wall switch for this, or does the pull chain handle it?
The pull chain is the switch. You bring power straight to the lampholder and control the lamp at the fixture, which is why these get used in basements, garages, closets and workshops where there is no switch leg run. Worth noting the chain switches the lamp; plan the receptacle side accordingly if you want the plugged-in device hot all the time.
5) Is a thermoset lampholder better than a plastic one for a hot fixture?
Thermoset is a molded thermosetting compound that will not soften and re-flow with heat the way a thermoplastic body can, which is why it is the usual pick where a lamp runs hot right against the socket, such as an enclosed utility or pendant fixture. The S865W-SP body is thermoset throughout.
6) What does the two-piece design mean for servicing this lampholder?
The Cooper S865W-SP splits into a cap and a body rather than being one sealed shell. You land your conductors in the base, then bring the shell down over it, and if the socket ever needs attention later you can open it in place instead of pulling the whole fixture apart. Useful on a lampholder swap where the existing box and conductors are staying put.
7) Will this match the other lampholders in a building I'm standardizing?
It comes in white only, under a single model, S865W-SP. For a property manager replacing sockets across storage rooms or a basement run, that means every unit you order is the same body, same medium base, same 660W rating and same pull chain, so the openings stay consistent without sorting through option codes.
How fast can I get the Cooper Wiring Devices S865W-SP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Cooper Wiring Devices S865W-SP come with a warranty?
Absolutely. The Cooper Wiring Devices S865W-SP is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Cooper Wiring Devices S865W-SP?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Cooper Wiring Devices S865W-SP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!