You may also like
Eaton Pow-R-Way III circuit breaker plug-in unit
Manufacturer Resources
Product Specs
- Amperage Rating:
- 110A
- Circuit Breaker Frame:
- F Frame (15-225 A)
- Grounding Options:
- 50% Integral/Housing
- Interrupt Rating:
- 100 kAIC at 240 Vac, 100 kAIC at 480 Vac, 25 kAIC at 600 Vac
- Product Subgroup:
- circuit breaker
- Department:
- Electrical
- Product Group:
- Electrical Components
- Product Type:
- Breaker
- Product Length:
- 12.36 IN
- Product Details:
- Breaker
- Product Height:
- 21.2 IN
- Product Weight:
- 25 LB
- Product Width:
- 5.43 IN
B-LINE P3BHFD3110 – Frequently Asked Questions
1) What amperage is the B-Line P3BHFD3110 plug-in unit rated for?
The P3BHFD3110 Pow-R-Way III plug-in unit carries a 110 A breaker on an F frame, which spans 15 to 225 A. If your feeder tap needs something above or below 110 A, you want a different unit in the same F frame family rather than this one.
2) What is the short circuit interrupting rating on the P3BHFD3110 busway plug-in unit?
It is rated 100 kAIC at 240 Vac, 100 kAIC at 480 Vac, and 25 kAIC at 600 Vac. On a 480 V busway run fed from a large service, the 100 kAIC figure is the one to check against your available fault current at the tap point; at 600 V the usable rating drops to 25 kAIC.
3) Will a Pow-R-Way III plug-in unit fit any manufacturer's busway?
No. The P3BHFD3110 is built for the Eaton Pow-R-Way III busway system and plugs into that system's openings. Busway plug-in stabs and housings are not interchangeable between manufacturers or between busway generations, so confirm the run on your job is Pow-R-Way III before ordering.
4) How big and how heavy is the P3BHFD3110 plug-in unit for installation planning?
Plan for a unit measuring 21.2 in height, 12.36 in length, and 5.43 in width, weighing 25 lb. At that weight and reach it is a two-hand lift onto an overhead busway run, so most crews stage it on a lift or work in pairs and leave clearance in front of the plug-in opening for the operating handle.
5) When do I use a busway plug-in unit instead of running conduit to a panelboard?
A plug-in unit like the P3BHFD3110 taps power straight off an overhead busway run at the point of use, with the 110 A F-frame breaker providing the disconnect and overcurrent protection for that tap. That is the usual choice in plants and warehouses where equipment locations change, because you move or add a plug-in unit instead of repulling feeders. If the load is fixed and permanent, a conventional panelboard and conduit feeder is the simpler build.
6) What exact part number should I quote for this Eaton busway breaker plug-in unit?
Order it as B-Line P3BHFD3110. That single catalog number covers the 110 A F-frame breaker, the 100/100/25 kAIC interrupting ratings, and the 50 percent integral housing ground configuration, so no further suffix is needed for those options.
How fast can I get the B-LINE P3BHFD3110 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE P3BHFD3110 come with a warranty?
Absolutely. The B-LINE P3BHFD3110 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE P3BHFD3110?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE P3BHFD3110 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.