You may also like
Eaton Residential Grade Duplex Receptacle, 15A 125V, Thermoplastic
Model: EAT-736BBOX
Eaton Residential Grade Duplex Receptacle, 15A 125V, ThermoplasticThe Eaton Residential Grade Duplex Receptacle is a 15A, 125V duplex device built for everyday residential wiring, accepting #14-12...
Eaton
Starting at
$1.22
Eaton Residential Grade Duplex Receptacle, 15A, #14-10 AWG
The Eaton Residential Grade Duplex Receptacle is a flush-mount wiring device built for both commercial and residential electrical installations. Rated 15A and sized for #14-10 AWG conductors, this duplex receptacle delivers dependable everyday performance for general-purpose branch circuits. It is cULus Listed, giving installers and inspectors confidence that the device meets recognized safety standards for the job at hand.
Key Features
- Amperage Rating: Rated 15A for standard general-purpose branch circuit loads.
- Wire Range: Accepts #14-10 AWG conductors for flexible field wiring.
- Duplex Configuration: Two-outlet design supports multiple plug-in devices from a single wallbox.
- Flush Mount: Flush installation profile for a clean, low-profile finish in wallboxes.
- Commercial/Residential Grade: Suitable for use across both commercial and residential electrical projects.
- Compact Footprint: Product measures .79 in wide, 4 in high, and 1.24 in in length/depth for standard wallbox compatibility.
Certifications & Compliance
- cULus Listed
Technical Specifications
- Amperage Rating: 15A
- Wire Range: #14-10 AWG
- Grade: Commercial/Residential
- Mounting: Flush
- Product Width: .79 in
- Product Height: 4 in
- Product Length/Depth: 1.24 in
- Certifications: cULus Listed
- Warranty: Refer to warranty document.
Typical Applications
- Commercial and Residential Electrical Installations
- General-Purpose Branch Circuit Wiring
- Office, Retail, and Multi-Family Wallbox Installations
- New Construction and Renovation Projects
- Standard Wallplate and Device Combinations
Why Eaton?
Eaton wiring devices are engineered for consistent, code-compliant performance across demanding commercial and residential electrical environments. This duplex receptacle's cULus Listing reflects Eaton's commitment to safety and reliability, while its straightforward flush-mount design and #14-10 AWG wire range make it a practical, trustworthy choice for electricians specifying general-purpose devices on any job.
Manufacturer Resources
Product Specs
- Product Width:
- .79 in
- Warranty:
- Refer to warranty document.
- Product Height:
- 4 in
- Product Length/Depth:
- 1.24 in
- Certifications:
- cULus Listed
- Product Type:
- Duplex Receptacle
- Department:
- Electrical
- Amperage Rating:
- 15A
- Configuration:
- Duplex
- Listing:
- cULus
- Product Group:
- Wiring Devices
- Product Subgroup:
- Receptacles & Outlets
- Product Color:
- White
- Product Weight:
- 0.13 lb
- Connection Type:
- Screw
- Product Material:
- Thermoplastic
- Product Length:
- 1.24 in
- Voltage Rating:
- 125V
- Allowable Wire Size:
- #14-10 AWG
- Number of Poles:
- Two-pole
Eaton TR270W – Frequently Asked Questions
1) Is the Eaton TR270W receptacle UL listed for commercial jobs?
It is cULus Listed, which covers both US and Canadian requirements for the inspector. Eaton rates it commercial/residential grade, so it is fine for offices, retail, and multi-family wallboxes on general-purpose circuits, but it is not a hospital grade or spec grade device.
2) Will this Eaton duplex receptacle fit a standard single-gang wallbox and wallplate?
Yes. It is a flush-mount duplex device measuring .79 x 4 x 1.24 inches, which is the standard duplex strap footprint, so it drops into a standard single-gang box and takes a standard duplex wallplate.
3) I need 20A duplex receptacles for a commercial corridor instead of the Eaton TR270W 15A device. What should I use?
The Eaton TR270W is a 15A duplex receptacle for general-purpose branch circuits. For a 20A circuit, the Bryant 5362B is a heavy-duty grade 20A/125V duplex receptacle, and the Pass & Seymour 26352W is a 20A 125V specification grade decorator-style duplex in white. Both are 20A devices rather than the 15A rating the Eaton carries.
4) Does the Eaton TR270W satisfy tamper-resistant requirements in dwelling units, or do I need a different device?
The Eaton TR270W is described as a residential/commercial grade 15A duplex receptacle and its published data covers amperage, wire range and cULus listing. Where the job calls specifically for a tamper-resistant duplex, the Pass & Seymour 3232TRW from the Trademaster series is a tamper-resistant duplex receptacle in white.
5) Can I use the Eaton TR270W in patient care areas of a clinic?
The Eaton TR270W is a residential/commercial grade 15A duplex receptacle for general-purpose branch circuits. Hospital-grade locations are a different device class: the Pass & Seymour 2097HGI is a hospital grade 20A duplex self-test GFCI receptacle in ivory, which combines the hospital grade designation with GFCI protection that the Eaton does not carry.
6) Can the Eaton TR270W be used in a hazardous or classified area?
No. The Eaton TR270W is a flush wallbox duplex receptacle for general commercial and residential branch circuits. Classified locations call for a different construction, such as the Appleton FSQC Series interlocked explosionproof receptacle or the Appleton U-Line ECS factory-sealed 15 and 20 amp 3-pole plug and receptacle set.
7) Can I standardize on the Eaton TR270W across an apartment portfolio?
For general-purpose 15-amp outlets in bedrooms, living areas, and offices it is a consistent choice: one device, #14-10 AWG range, flush mount, cULus Listed. Heavier-traffic locations or equipment loads should still get a 20A heavy-duty device such as the Bryant 5362B or 5362BI.
8) I need a receptacle the cord cannot pull out of - is the Eaton TR270W the right pick?
No. The Eaton TR270W is a flush-mount straight-blade duplex receptacle rated 15A. For a locking connection, the Bryant 70520FR is a 7 Series NEMA flanged locking receptacle and the Pass & Seymour 3330 Turnlok is a 30A non-NEMA single receptacle. Those use twist-locking configurations rather than the duplex straight-blade openings on the Eaton.
9) Will the Eaton TR270W work on a 277V motor circuit?
The Eaton TR270W is a 15A duplex receptacle for general-purpose branch circuits. A 277V motor connection is a different device class - the Bryant 430R9W 4750DR is a 2-pole 3-wire 277V motor-duty receptacle built for that service.
10) What is the exact model number to order for this Eaton residential grade duplex receptacle?
The part number is Eaton TR270W, a 15A duplex receptacle for #14-10 AWG wire.
11) What is the difference between the Bryant 5362B and 5362BI if I am cross-shopping against the Eaton TR270W?
Both Bryant devices are heavy-duty grade 20A/125V duplex receptacles; the 5362B is catalogued as part of the 5362B series while the 5362BI is listed as a single heavy-duty 20A/125V duplex. Either is a 20A heavy-duty device, where the Eaton TR270W is a 15A commercial/residential grade duplex.
How fast can I get the Eaton TR270W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton TR270W come with a warranty?
Absolutely. The Eaton TR270W is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton TR270W?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Eaton TR270W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.