You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Amperage Rating:
- 1600A
- Circuit Breaker Type:
- CRDC
- Frame:
- R-frame
- Interrupt Rating:
- 200 kAIC at 240 Vac, 100 kAIC at 480 Vac, 65 kAIC at 600 Vac
- Number Of Poles:
- Three-pole
- Terminals:
- Without terminals
- Trip Type:
- Electronic LSI
- Voltage Rating:
- 600 Vac
- Department:
- Electrical
- Product Length:
- 20 IN
- Performance Rating:
- 100% rated
- Product Height:
- 15.5 IN
- Product Weight:
- 102 LB
- Product Width:
- 15.5 IN
B-LINE CRDC316T92W – Frequently Asked Questions
1) Does the Eaton Series C CRDC316T92W breaker come with lugs or terminals?
No. The CRDC316T92W ships without terminals, so line and load connectors have to be ordered separately to match your conductor size and configuration. Budget for that when you price the job, because an R-frame 1600A breaker will not land cable without them.
2) What is the interrupting rating of the CRDC316T92W at 480V?
100 kAIC at 480 Vac. It's also rated 200 kAIC at 240 Vac and 65 kAIC at 600 Vac, so check your available fault current against the actual system voltage before you spec it. The breaker's voltage rating is 600 Vac.
3) What trip functions does the CRDC316T92W electronic trip unit have?
It uses an electronic LSI trip unit: long time, short time, and instantaneous. There is no ground fault (G) element in an LSI unit, so if your drawing calls for integral ground fault protection on the service, this is not the right trip designation.
4) Can I use this breaker on a 600V system?
Yes, the CRDC316T92W is rated 600 Vac, but the interrupting capacity drops to 65 kAIC at that voltage compared with 100 kAIC at 480 Vac. On a 600V service you need available fault current at or below 65 kA for the breaker to be applied without a series-rated arrangement.
5) How much does a 1600A R-frame breaker weigh and what space does it need?
The CRDC316T92W weighs 102 lb and measures 20 in by 15.5 in by 15.5 in. At that weight it is a two-man lift or a rigged lift into the gear, and you want the switchboard cell depth and cable bending space confirmed before it goes to site.
6) Is the CRDC316T92W a three-phase breaker?
It is a three-pole breaker, which is what you use on a three-phase, three-wire or four-wire feeder. For a 480Y/277V four-wire service the neutral is handled outside the breaker, since the pole count here covers the three phase conductors only.
How fast can I get the B-LINE CRDC316T92W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE CRDC316T92W come with a warranty?
Absolutely. The B-LINE CRDC316T92W is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE CRDC316T92W?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE CRDC316T92W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.