You may also like
Pass & Seymour R600PIV R Series Preset Rotary Incandescent Dimmer, 600W
Model: PSE-R600PIV
Pass & Seymour R Series Preset Rotary Incandescent Dimmer, 600WThe Pass & Seymour R Series Rotary Dimmer is a preset incandescent dimmer rated 600W at 120V, engineered for reliable residential and...
Pass & Seymour
Starting at
$14.00
Pass & Seymour TSDCL303P Toggle Slide Dimmer, CFL/LED, Single Pole/3-Way, 300W
Model: PSE-TSDCL303PBK
Pass & Seymour TSDCL303P Toggle Slide Dimmer, CFL/LED, Single Pole/3-Way, 300WThe Pass & Seymour TSDCL303P Toggle Slide Dimmer by Legrand replaces a standard wall switch with combined ON/OFF toggle...
Pass & Seymour
$41.19
Eaton SUL06P-V-KB-L Skye AL Series Slide Dimmer, 300W LED/600W Halogen
The Eaton SUL06P-V-KB-L is a Skye AL Series flush-mount slide dimmer engineered for residential and light commercial lighting control applications. Rated for 300W LED / 600W Halogen loads at 277V, this dimmer accepts wiring in the #14 – #12 AWG range and is built for use with Mark 10 fluorescent ballast systems operating at 71 Hz. Configured for single-pole or three-way installations, this family is available in Ivory and White finishes to blend with a range of residential and commercial decor while delivering dependable single-phase dimming performance.
Key Features
- Load Rating: Rated for 300W LED and up to 600W Halogen loads, giving installers flexibility across modern LED retrofits and legacy halogen fixtures.
- Wire Range: Accepts #14 – #12 AWG conductors for compatibility with standard residential and light commercial branch circuit wiring.
- Voltage: Designed for 277V single-phase systems, suited to light commercial lighting circuits as well as residential applications requiring this voltage class.
- Mounting Style: Flush mount design provides a clean, low-profile installation that sits neatly within a standard wallbox and cover plate.
- Switching Configuration: Available in single-pole or three-way wiring configurations, allowing control of lighting loads from one or multiple switch locations.
- Fluorescent Compatibility: Compatible with Mark 10 fluorescent ballast systems operating at 71 Hz for specialty fluorescent dimming applications.
- Finish Options: Available in Ivory or White to complement neutral wall colors in residential and light commercial interiors.
- Slide Control Operation: Slide-style actuator offers smooth, intuitive light level adjustment for everyday use.
- Housing Material: Polycarbonate construction for durable, long-lasting performance.
Technical Specifications
- Load Rating: 300W LED / 600W Halogen
- Wire Range: #14 – #12 AWG
- Voltage: 277V
- Frequency: 71 Hz
- Ballast Compatibility: Mark 10 Fluorescent
- Switching: Single-Pole, Three-Way
- Phase: Single-Phase
- Mounting: Flush
- Available Finishes: Ivory, White
- Material: Polycarbonate
- Application: Residential / Light Commercial
Typical Applications
- Residential Lighting Control
- Light Commercial Interior Lighting
- LED Retrofit Dimming Projects
- Halogen Fixture Dimming
- Fluorescent Lighting Circuits with Mark 10 Ballasts
- Single-Pole and Three-Way Switching Installations
Why Eaton?
Eaton's Skye AL Series slide dimmers are built to deliver reliable, code-compliant lighting control across a wide range of load types, from LED and halogen to specialty fluorescent ballast systems. With flexible single-pole and three-way wiring configurations, a broad #14 – #12 AWG wire range, durable polycarbonate construction, and a clean flush-mount design available in Ivory or White, the SUL06P-V-KB-L family is designed for electricians and facility managers who need dependable dimming performance for residential and light commercial spaces.
Manufacturer Resources
Product Specs
- Product Type:
- Slide Dimmer
- Voltage Rating:
- 277V
- Configuration:
- Single-Pole/Three-Way
- Product Wattage:
- 300W LED / 600W Halogen
- Product Finish:
- Flush
- Department:
- Electrical
- Product Subgroup:
- Dimmer Switches
- list_batch:
- EAT-20260924
- Product Width:
- 4.05 inches
- Number of Phases:
- 1
- Product Material:
- Polycarbonate
- Product Height:
- 6.125 inches
- Product Weight:
- .01 pounds
- Product Group:
- Wiring Devices
- Connection Type:
- Side
- Product Length:
- 2.03 in
- Number Of Poles:
- Single-pole, Three-way
Eaton SUL06P-V-KB-L – Frequently Asked Questions
1) Can the Eaton Skye AL SUL06P slide dimmer be used on a standard 120V residential circuit?
No. The Skye AL Series SUL06P slide dimmer is a 277V device, single-phase. Putting it on a 120V branch circuit is the wrong application; you want a 120V-rated dimmer instead. The 277V rating is why this one shows up on light commercial lighting circuits, where 277V lighting branch circuits are common.
2) How much LED load can I put on the Eaton SUL06P dimmer?
300W of LED load, or up to 600W of halogen on the same device. If you are dimming a run of LED troffers or downlights, total the driver input wattage and keep it at or under 300W. Mixing in incandescent or halogen fixtures does not raise the LED figure, so size against the lower of the two ratings for whatever is actually on the circuit.
3) Will this Eaton slide dimmer work in a three-way setup with a second switch across the room?
Yes. The SUL06P is a single-pole/three-way device, so one dimmer handles the dimming and a companion three-way switch at the other location does the on/off. Only one dimmer goes in the circuit; do not install two dimmers on the same three-way run.
4) What wire size does the Eaton Skye AL slide dimmer accept?
It takes #14 to #12 AWG conductors, which covers typical 15A and 20A lighting branch circuit wiring. If your 277V lighting circuit is pulled in #10, you will need to pigtail down to #12 inside the box.
5) Can I dim fluorescent fixtures with the Eaton SUL06P?
Only with Mark 10 fluorescent ballasts, operating at 71 Hz. Standard non-dimming or other dimming ballast families are not covered by that compatibility, so confirm the ballast label in the fixture before specifying this dimmer for a fluorescent circuit.
6) What colors does the Eaton SUL06P Skye AL slide dimmer come in?
Two: Ivory as SUL06P-V-KB-L and White as SUL06P-W-KB-L. Both are the same electrical device, so for a building where you are standardizing devices across floors, order by the suffix that matches your existing wiring devices and plates.
7) Does the Eaton Skye AL slide dimmer need a special wallplate, or will a standard decorator plate fit?
It is a flush-mount device that sits in a standard wallbox under a cover plate. The plate is a separate order, so add one in the matching Ivory or White when you buy the dimmer.
8) How big is the Eaton SUL06P dimmer and what is the housing made of?
Published dimensions are 6.125 by 4.05 inches, and the housing is polycarbonate. Those figures are the packaged device footprint rather than the strap, so plan box fill and gang spacing off the device strap in the field.
How fast can I get the Eaton SUL06P-V-KB-L delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton SUL06P-V-KB-L come with a warranty?
Absolutely. The Eaton SUL06P-V-KB-L is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton SUL06P-V-KB-L?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Eaton SUL06P-V-KB-L from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.