You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Actuator:
- START/STOP pushbuttons
- Amperage Rating:
- 15A
- Coil Voltage:
- 120 VAC, 60 Hz
- Configuration:
- IP66, NEMA 4X-watertight (non-metallic)
- Indicator:
- RUN pilot light
- Indicator Color:
- Red
- Notes:
- Non-Combination Ampere Rating. See Tab 1 for enclosure type/IP rating cross-reference. No disconnect.
- Operation:
- Non-reversing
- Department:
- Electrical
- Product Type:
- Non-combination
- Product Length:
- 6.7 IN
- Product Details:
- Non-combination
- Product Height:
- 13.31 IN
- Product Weight:
- 10 LB
- Product Width:
- 9.84 IN
B-LINE ECX09E5ACA – Frequently Asked Questions
1) Does the Eaton XT ECX09E5ACA enclosed starter include a disconnect switch?
No. The ECX09E5ACA is a non-combination enclosed control, which means there is no disconnect or short-circuit protective device in the enclosure. You supply upstream branch protection and a means of disconnect separately. If you need the disconnect built in, you want a combination enclosed starter instead.
2) Can this Eaton XT enclosed motor starter be mounted outdoors or in a washdown area?
Yes. The enclosure is non-metallic and rated NEMA 4X watertight, IP66, so it handles outdoor exposure, hose-down washdown, and corrosive environments where a painted steel box would rust. Non-metallic also means no repainting and no galvanic issues near chemicals or salt air.
3) What control voltage does the ECX09E5ACA starter coil need?
The contactor coil is 120 VAC, 60 Hz. You need a 120 V control source, typically from a control transformer or a separate 120 V circuit, since this unit has no built-in disconnect or power supply. A 240 V or 480 V coil control circuit will not drive it.
4) Can I use this Eaton enclosed control to reverse a motor?
No. The ECX09E5ACA is a non-reversing starter with START/STOP pushbuttons, so it runs a motor in one direction only. Reversing a three-phase motor needs a reversing (FWD/REV) enclosed starter with interlocked contactors.
5) What operators and indicator lights are already built into the cover?
The cover comes with START and STOP pushbuttons plus a red RUN pilot light, so it is ready to use as a local motor control station out of the box. No extra operators or pilot devices need to be ordered or drilled in.
6) What is the ampere rating of the ECX09E5ACA?
15 A, quoted as a non-combination ampere rating, so it is the rating of the control unit itself rather than of any integral protective device. Size your upstream overcurrent protection and conductors to the motor and to that 15 A limit.
7) How much wall space do I need for this Eaton XT enclosed control?
Plan for an enclosure measuring 13.31 x 9.84 x 6.7 inches (height, width, length) at about 10 lb. The 6.7 inch depth matters most in tight equipment rooms and beside machine guarding, and the 10 lb weight means anchors into block or studs rather than drywall alone.
8) Is a NEMA 4X rating the same thing as IP66?
They are separate systems that overlap. The ECX09E5ACA carries both: IP66 and NEMA 4X watertight. IP66 covers dust-tight plus high-pressure water jets; NEMA 4X adds corrosion resistance to the watertight requirement. Specs that call for either one are satisfied by this enclosure.
9) What is the exact part number to order this Eaton non-metallic enclosed control?
Order Eaton B-Line ECX09E5ACA. It is a single configuration, XT IEC line, non-combination, non-reversing, 120 VAC coil, with START/STOP buttons and a red RUN light in a non-metallic NEMA 4X box.
How fast can I get the B-LINE ECX09E5ACA delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE ECX09E5ACA come with a warranty?
Absolutely. The B-LINE ECX09E5ACA is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE ECX09E5ACA?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE ECX09E5ACA from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.