B-Line Eaton Eaton XT IEC Line...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$812.51
Image coming soon

B-Line Eaton Eaton XT IEC Line Non-Metallic Enclosed Control

(No reviews yet) Write a Review

Model: ECX09F5ABA

In Stock (leaves warehouse same day if ordered before 3pm ET)

$812.51
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Eaton Eaton XT IEC Line Non-Metallic Enclosed Control

ECX09F5ABA - spec sheet

Manufacturer Resources

Product Specs

Actuator:
START/STOP pushbuttons
Amperage Rating:
18A
Coil Voltage:
120 VAC, 60 Hz
Configuration:
IP66, NEMA 4X-watertight (non-metallic)
Notes:
Non-Combination Ampere Rating. See Tab 1 for enclosure type/IP rating cross-reference. No disconnect.
Operation:
Non-reversing
Department:
Electrical
Product Type:
Non-combination
Product Length:
12.5 IN
Product Details:
Non-combination
Product Height:
7.5 IN
Product Weight:
2.5 LB
Product Width:
7.25 IN

B-LINE ECX09F5ABA – Frequently Asked Questions

1) Does the Eaton XT ECX09F5ABA enclosed starter include a disconnect switch?
No. The ECX09F5ABA is a non-combination enclosed control, so there is no disconnect and no built-in short circuit protection device. You still need an upstream disconnecting means and branch circuit protection (fused disconnect or circuit breaker) to complete the installation. If you want the disconnect inside the same enclosure, you need a combination starter instead.
2) Can the Eaton XT ECX09F5ABA enclosed starter be mounted outdoors or in a washdown area?
The enclosure is rated IP66 and NEMA 4X watertight in non-metallic construction, so it handles hose-directed water and dust, and the non-metallic housing resists corrosion. That covers outdoor, damp, and washdown duty typical of food processing, car washes, and wastewater. It is not rated for hazardous locations.
3) What is the amp rating on the ECX09F5ABA, and what motor will it run?
The non-combination ampere rating is 18A. Size your motor's full load amps against that figure at your line voltage, and set the overload to the motor nameplate FLA. Note the rating is the enclosed control's rating, not a short circuit rating, since no protective device is included.
4) Can I use this Eaton XT enclosed starter to reverse a motor?
No. The ECX09F5ABA is a non-reversing starter, single direction only. For forward/reverse duty on a conveyor, hoist, or damper actuator you need a reversing enclosed starter with two mechanically interlocked contactors.
5) How big is the Eaton XT non-metallic enclosed starter, and how much does it weigh?
Published dimensions are 12.5 in length, 7.5 in height and 7.25 in width, at 2.5 lb. Light enough for a single-person wall mount on unistrut or a machine frame, and the footprint is worth checking against tight panel gaps before you drill.
6) Does this enclosed control come with START and STOP buttons already installed in the cover?
Yes, the cover is factory fitted with START/STOP pushbuttons, so you get local motor control without drilling the enclosure or buying separate operators. Wiring in the field is line in, load out to the motor, and 120 V to the control circuit.
7) Is a non-metallic enclosure a better choice than steel for a motor starter?
Non-metallic wins where corrosion is the problem, wet, chemical, or coastal environments, and it is lighter to hang at 2.5 lb. Painted steel or stainless is the better pick where the box will take mechanical abuse or where you need a grounded metal enclosure for bonding practice. This ECX09F5ABA is the non-metallic IP66 / NEMA 4X version.
How fast can I get the B-LINE ECX09F5ABA delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE ECX09F5ABA come with a warranty?
Absolutely. The B-LINE ECX09F5ABA is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE ECX09F5ABA?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE ECX09F5ABA from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.