You may also like
Manufacturer Resources
Product Specs
- Body Material:
- PVDF
- Connection Type:
- No Hub
- Fitting Name:
- 90 Degree Elbow
- Series:
- 90 Elbows Plenum Plus PVDF NH
- Wall Thickness:
- 0.15 IN
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Valves
- Product Type:
- General Valve
- Pipe Size Dimension:
- 1 1/2 IN
Watts 723001 – Frequently Asked Questions
1) What pipe size does the Watts 723001 no-hub elbow fit?
The Watts 723001 is a 1-1/2 inch fitting. It changes direction 90 degrees and joins to 1-1/2 inch no-hub pipe using a clamp coupling, so both ends land on plain spigot pipe rather than a solvent socket or a threaded joint.
2) Can I solvent weld or thread the Watts 723001 elbow?
No. It is a no-hub fitting, so it is joined mechanically with a shielded no-hub coupling over the plain ends. There is no socket to cement and no thread to make up. If your run is fusion or mechanical-joint PVDF with hubs, this is the wrong end configuration.
3) What is the Watts 723001 elbow made of, and why does that matter for a lab waste line?
The body is PVDF, the material used for acid and chemical waste drainage where standard PVC or cast iron would be attacked. That is the reason a fitting like this shows up on lab, hospital, and industrial waste risers rather than on sanitary DWV.
4) Is the Watts 723001 part of the Plenum Plus line, and what does that mean?
Yes, it belongs to the Watts 90 Elbows Plenum Plus PVDF no-hub series. Plenum Plus is the PVDF chemical waste system Watts builds for runs through return-air plenum spaces, so the fittings, pipe, and couplings are specified together as one system.
5) Do I need to order couplings separately with the Watts 723001 elbow?
Yes. The 723001 is the elbow only. Every no-hub joint needs a shielded clamp coupling sized for 1-1/2 inch, and you will need one at each end of the fitting. Budget those into the takeoff along with the pipe.
6) What is the exact Watts part number for the 1-1/2 inch Plenum Plus 90 degree no-hub elbow?
Watts 723001. There is a single model on the part, so the number you quote, submit, and order is 723001 with no size or finish suffix to add.
7) What wall thickness does the Watts 723001 PVDF elbow have?
Wall thickness is 0.15 inch. That figure is what you check against the pipe and coupling you are pairing it with, since a no-hub shielded coupling clamps directly onto the fitting wall.
How fast can I get the Watts 723001 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Watts 723001 come with a warranty?
Absolutely. The Watts 723001 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Watts 723001?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Watts 723001 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.