You may also like
Emtek 222304 Modern Rectangular Brass Flush Pulls (1-3/4" x 4") - Knurled
Model: EMTEK-222304
Emtek 222304 Modern Rectangular Brass Flush Pulls (1-3/4" x 4") - Knurled
Specifications:
Height: 4" to 10"
Width: 2"
Projection: 1/8"
Material: Brass
Manufacturer Resources:
Emtek
Starting at
$43.00
$35.63
Emtek 220304 Modern Rectangular Brass Flush Pull (1-3/4" x 4")
Specifications:
- Height: 4" to 10"
- Width: 2"
- Projection: 1/8"
- Material: Brass
Manufacturer Resources
Modern Rectangular Pocket Door Lock - Passage
Product Specs
- Subcategory:
- Flush Pulls
- Collection:
- Brass
- Product Type:
- Flush Cup Pulls
- Product Group:
- Sliding Door and Barn Door Hardware
- Product Subgroup:
- Flush Pulls
- Commercial/Residential:
- Residential
- Series:
- Modern Rectangular
- Theme:
- Contemporary
- Electronic:
- No
- MAP Policy:
- Yes
- Product Model:
- 220304
- Product Size:
- 1-3/4" x 4"
- Product Shape:
- Rectangular
- Product Style:
- Contemporary
- Product Material:
- Brass
- Product Category:
- Sliding Door and Barn Door Hardware
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 220304-US26 – Frequently Asked Questions
1) Does the Emtek 220304 flush pull latch the door, or is it just a pull?
Pull only. The 220304 Modern Rectangular is a flush cup pull, a brass cup mortised into the face of the door that gives you something to grip when you slide it. There is no latch, no privacy bolt and nothing electronic inside it, so a pocket door fitted with only these pulls will drift in the pocket unless something else holds it. If the opening has to latch, Emtek builds a Modern Rectangular pocket door lock in passage function in the same series, so the pull and the lock read as one set.
2) Will the Emtek 220304 flush pull clear the jamb when the pocket door slides all the way into the wall?
Projection is 1/8 inch, so that is all the 220304 stands proud of the door face once the cup is mortised in. Nothing on it can catch the split jamb, the pocket trim or a passing slab on a bypass closet set. The face measures 1-3/4 by 4 inches, so the only real constraint is that the mortise falls inside the stile or rail you are cutting, with enough material left either side of it.
3) For a pocket door that has to be pulled back out of the wall pocket, is a rectangular flush cup pull like the Emtek 220304 enough, or is a ring pull needed?
It depends on which motion the opening asks for. The Emtek 220304 is a flush cup pull measuring 1-3/4 inches by 4 inches in brass, mortised into the door face with a 1/8 inch projection, so the pocket is a recess you put fingertips into to slide the door along its track. Once the leaf is fully inside the wall pocket there is no part of it standing proud of the face to hook. The Baldwin 0397 SOL takes the other approach, combining a flush cup handle with a solid spindle ring pull, so the ring swings up out of the cup and gives a grip to pull against when the door has to be drawn back out. If the door parks flush inside the pocket and someone has to retrieve it, the ring style is the one built for that pull; if the door stops short of full pocket travel or is a bypass or barn leaf that always stays reachable, the plain flush cup covers it.
4) Can I spec the Emtek 220304 flush pull for a commercial corridor or an office fit-out?
Emtek rates the 220304 as residential hardware. For apartment turns, condo work, single family and light hospitality it is the right class of part, and it is solid brass rather than a plated pot metal cup. For a high-traffic commercial opening or anything running to a written door hardware schedule, buy from a line rated for commercial duty instead. Nothing about this pull is built to answer a commercial spec.
5) What finishes does the Emtek 220304 flush pull come in? I need it to match the rest of the hardware in the unit.
Ten finishes, all on Emtek's standard US codes: Oil Rubbed Bronze (US10B), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), Satin Brass (US4), French Antique (US7), Polished Nickel Lifetime (US14), Satin Nickel (US15), Pewter (US15A), Flat Black (US19) and Polished Chrome (US26). Because they are the same codes Emtek uses across its levers, knobs and pocket door hardware, a pull ordered in US15 lands next to the US15 hardware already hanging on the other doors.
6) Will the unlacquered brass version of the Emtek flush pull stay bright, or does it darken?
Unlacquered Brass (US3NL) is a living finish. It is bare brass with no clear coat over it, so it darkens and patinas from handling, and it does that fastest on a pull people hook their fingers into every day. Some buyers want exactly that; a rental turn usually does not. If you want the brass look to hold where it started, order the pull in Polished Brass Lifetime (US3), which is the brass tone Emtek carries as a lifetime finish.
7) What is the difference between a plain flush cup pull and a flush pull with a ring, and which one do I want on a pocket door?
The Emtek 220304 is a plain flush cup: a rectangular brass recess you hook two fingers into, standing only 1/8 inch off the door face. That is what you want where the door has to run past trim or disappear into a pocket, and it is the cleaner face on a contemporary door. A cup with a ring, such as the Baldwin 0397 SOL Estate flush cup handle with solid spindle ring pull, carries a ring that lifts out of the cup so you can get a whole hand on it. Choose the ring when the slab is heavy or sits deep in the pocket and two fingers will not start it moving. Choose the plain cup for lighter doors and a flatter look.
8) The rest of the hardware on the door is traditional Baldwin Estate trim. How does the Emtek 220304 flush pull compare on appearance?
They come from opposite ends of the style range. The Emtek 220304 is a rectangular flush pull from the Modern Rectangular series, contemporary in style, with square corners and a flat brass face. The Baldwin 0397 SOL belongs to the Estate series and reads as a flush cup handle carrying a solid spindle ring pull, so the visible element is a ring rather than a straight-sided rectangle. A door already carrying Estate trim will show the rectangular pull as a deliberate contrast rather than a match, so the choice comes down to whether the pocket or sliding leaf is meant to blend with the existing suite or read as its own detail.
9) A search for flush cup pulls turns up both the Emtek 220304 and the Baldwin 0397 SOL. Are they the same kind of part?
They are not interchangeable pieces of hardware even though both sit recessed in the door face. The Emtek 220304 is a plain flush cup pull, a single brass rectangle 1-3/4 inches by 4 inches with a 1/8 inch projection and no moving parts, so what gets installed is a cup and nothing else. The Baldwin 0397 SOL is described as a flush cup handle plus a solid spindle ring pull, meaning it carries a spindle and a ring that moves, and the door prep and the parts count follow from that. Ordering one expecting the other means either a moving ring where a clean recess was specified, or a bare cup where somebody needed something to grab. Confirm which of the two the drawing or the existing doors call for before the order goes in.
10) Is the Emtek 220304 flush pull solid brass or a plated cup?
Brass through the section, not a coating over something cheaper. Emtek lists both the material and the substrate of the 220304 as brass, which is what decides how it ages: on a pull that gets a fingernail dragged across it a few dozen times a day, a worn spot on brass still reads as brass, where a worn spot on plated zinc reads as a defect. That is also why the unlacquered version can be offered at all.
11) I have a tall, heavy pocket door. Is the 4 inch Modern Rectangular flush pull enough, or does Emtek make a longer one?
The 220304 is the small one, 1-3/4 by 4 inches on the face. Emtek's Modern Rectangular flush pulls run from 4 up to 10 inches, and on a tall or heavy slab the longer sizes are worth it: more of the cup to get fingers into, and the load spread over more of the stile rather than concentrated on a 4 inch cutout. For a standard interior pocket door or a closet bypass, the 4 inch is the usual choice and keeps the face quiet.
How fast can I get the Emtek 220304-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 220304-US26 come with a warranty?
Absolutely. The Emtek 220304-US26 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 220304-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 220304-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.