Emtek 2307 Sandcast Bronze 3 Hooks with Rectangular Plate

The 2307 rack's plate measures 9-1/2 x 2 inches, and the hooks project 2-1/2 inches off the wall. Plan the 2-1/2 inch projection into your clearance if it's going behind a door swing or in a narrow hall or bath.

Emtek lists the 2307 as residential. It's a sandcast bronze wall rack built for baths, mudrooms, and back-of-door use in homes and apartments. For a commercial corridor, locker room, or restroom partition, a spec-grade coat hook like the Trimco 3070-1 Coat and Hat Hook is the type to look at instead.

The Emtek 2307 is a three-hook set on one rectangular plate, 9-1/2 inches by 2 inches with a 2-1/2 inch projection, sold complete with screws. For a single hanging point instead, the Deltana BBN2009 is a single robe hook in the BBN Series. It puts one hook at one location rather than spreading three across a nine-and-a-half inch plate, so it suits a narrow wall, a door back, or the space beside a vanity where a full rack will not fit.

The Emtek 2307 carries three hooks on a single rectangular plate. If two is the right count, the Deltana 55D2010 double robe hook in the 55D Series and the Deltana 88DRH double robe hook in the 88 Series are both solid brass, and the Deltana BBS2010 is a double robe hook in the BBS Series. On the Orca Hardware side, the 4854 Blakely and the 4954 Whidbey are both double robe hooks. Each gives two hanging points at one mounting location instead of the 2307's three-across layout.

The Emtek 2307 is a sandcast bronze three-hook rack designated for residential use. For a commercial opening, the Trimco 3070-1 is a coat and hat hook in the 3070 Series, and the Trimco 7010 fOCAL is a robe hook and stop, which combines the hanging point with a door stop function in one piece. Those are the pieces to look at for a corridor, a restroom partition, or a back-of-house area rather than the 2307.

Screws are in the box. The 2307 ships as a complete set with its screws, so the only thing you may need to add is an anchor suited to your wall (the fasteners supplied are screws, not a drywall anchor kit).

Three: Flat Black (2307FB), Medium Bronze (2307MB), and Tumbled White Bronze (2307TWB). All three are the same sandcast bronze casting, so if you're matching bath accessories or door hardware already in the Emtek Sandcast Bronze line, order by the same finish code you used there.

A three-hook plate like the 2307 puts all three hooks on one 9-1/2 x 2 inch backplate, so it's one mounting operation, one straight line, and three coats or robes off a single stud run. Individual hooks such as the Deltana BBN2009 single robe hook or a double like the Deltana 55D2010 let you scatter hooks where the space allows, which is what you want on a narrow return wall or beside a shower where a 9-1/2 inch plate won't fit.

It's part of Emtek's Sandcast Bronze Bath Hardware series, the same collection as the towel bars and accessories, so the casting character and the finish codes line up with the rest of that line. Order the same finish code across the group: FB, MB, or TWB.

The Emtek 2307 is purely a hanging piece: three hooks on a 9-1/2 by 2 inch rectangular plate, wall mounted, projecting 2-1/2 inches. The Trimco 7010 fOCAL is a robe hook and stop, meaning it also serves as a door stop. If the bathroom door swings into the wall where the hook goes, the 7010 handles both jobs at that point; the 2307 does not stop a door and should not be positioned where a door will strike it.

The Emtek 2307 is a sandcast bronze piece in a rustic style with a rectangular plate. If the room calls for a different look at a single hanging point, the Orca Hardware 2753 is a robe hook in the 27-Cypress Series and the Orca Hardware 3654 is a robe hook in the 36-Swirl Series. Both are single robe hooks rather than a three-hook plate, so plan on one hook per mounting location or repeat them along the wall.

They are different families and will not read as a matched set. The Emtek 2307 belongs to the Sandcast Bronze bath hardware collection and comes in Flat Black, Medium Bronze, and Tumbled White Bronze. The Deltana pieces each sit in their own series -- 55D2010 in the 55D Series, 88DRH in the 88 Series, BBS2010 in the BBS Series, BBN2009 in the BBN Series -- with their own plate shapes and finish ranges. For a room where the towel bar, ring, and hooks should match, stay inside one collection rather than pairing the 2307 with a Deltana hook.

A double robe hook such as the Deltana BBS2010 or the Orca Hardware 4854 Blakely puts two hooks at one mounting point. The Emtek 2307 spreads three hooks along a 9-1/2 inch by 2 inch plate, so the coats hang apart from each other rather than stacked at one spot. It also means one wall footprint and one set of screws for three positions instead of three separate hooks to lay out and anchor. If the goal is three garments hanging clear of each other, a double hook is not a direct swap.

Solid sandcast bronze, cast rather than stamped or plated. That's why the surface has the texture and slight irregularity that goes with the rustic look, and it's the same substrate across all three finishes. If you want solid brass instead, the Deltana 88DRH double robe hook is a solid brass option.

It's built as a wall mount rack on a rectangular backplate, and it's the plate that gets fastened. The screws are supplied for that; on a hollow-core door there's no solid backing behind the plate, so a solid wall or a stud, or a solid-core door, is what this wants.

The Emtek 2307 is sandcast bronze, offered in Flat Black, Medium Bronze, and Tumbled White Bronze, and covers three hanging points with a single plate and one screw set. The Deltana 55D2010 and 88DRH are solid brass double robe hooks in the 55D and 88 Series. For a unit where three garments need to hang apart, the 2307 does it with one install; where the wall is short or you want a hook by the shower and another by the door, two Deltana doubles give you the same count spread across two locations.