Emtek 3302 Memphis Brass Mortise Entrance Handleset - Entry Set

The 3302 Memphis mortise entrance handleset uses a standard mortise pocket prep to ANSI A115.1, so it drops into a door already prepped for a standard mortise lock body. Backset is either 2-1/2 inch or 2-3/4 inch and you pick one when you order, so measure from the door edge to the center of the existing cross bore or spindle hole before you commit. Door thickness is 1-3/4 inch standard; if your door is thicker, say so on the order and the set is built for it.

Handing is required, and there is no field-reversing your way out of it. Four choices: LH, RH, LHR and RHR, where the two reverse-bevel options are for an out-swing door. Stand outside the opening: if the door swings away from you it is a reverse bevel (LHR or RHR); if it swings toward you it is LH or RH, named for the side the hinges are on. Get this wrong on a mortise lock and the latch bevel faces the wrong way.

Both functions are offered on the 3302 Memphis handleset. F20 is the standard entrance function most homeowners want on a front door. F13 is a dormitory function, which is what you specify when you want the outside trim to stay locked until it is unlocked by key, the usual pick for rental units, ADUs and secondary entrances where you do not want the door left unsecured behind someone. The lock is UL Listed with a 180 minute fire rating either way.

Complete set. The 3302 Memphis ships with the mortise lock body, latch and strike plate, plus the exterior handle and the inside trim you choose. The one thing you have to decide rather than add is the interior knob or lever, which is a required selection at ordering rather than a separate part number.

A mortise set like the Emtek 3302 puts the latch and the deadbolt in one lock body inside a routed pocket in the door edge, so the exterior handle retracts the latch and one lock does both jobs. It needs the full ANSI A115.1 mortise pocket cut, so it suits a new door or one already mortised. If your door has only the two standard round bores, you want a tubular handleset instead, where a separate deadbolt sits above a bored latch: the Schlage Residential F60 Addison with Accent lever or the Kwikset 687 Amador are that style, and both are listed for 1-3/8 to 1-3/4 inch and 1-3/4 inch doors respectively. Retrofitting a bored door to mortise means a new door or a router jig.

The closest cross-brand match is the Baldwin Estates 6542 Tremont entry mortise trim, offered in single cylinder and double cylinder and listed for a 1-3/4 inch door. Single cylinder is the direct counterpart to the 3302, which is also single cylinder; the double cylinder Tremont is the one to look at if you have glass beside the door and want a key required from the inside as well. Everything else in the handleset category from Deltana, Weslock, Kwikset and Schlage Residential is tubular rather than mortise.

The 3302 is built for a 1-3/4 inch door as standard, and thicker doors are handled by specifying the thickness at ordering rather than by an adjustable range. If you would rather have a set that covers a range out of the box, the Deltana 810871 Montego handleset is listed for 1-3/8 to 2 inch and the Weslock 2810 Hillcrest for 1-3/8 to 2 inch. For a genuinely thick door, the Weslock 1411 Traditionale Colonial covers 1-3/4 to 2-1/4 inch. Those are all tubular handlesets, not mortise.

Five decisions on the order: handing (LH, RH, LHR or RHR), backset (2-1/2 or 2-3/4 inch), function (F20 entrance or F13 dormitory), finish, and the interior knob or lever. Door thickness only needs stating if it is not 1-3/4 inch. Keying is the last call, alike or different, with a key code if you are matching an existing system. Handing and backset are the two that cannot be changed after the fact, so measure the door edge and confirm the swing before you send it.

The Baldwin Estates 6542 Tremont single cylinder entry mortise trim is the nearest Baldwin match, since both are mortise entry trim rather than tubular handlesets. The Emtek 3302 Memphis is a brass mortise handleset with a single cylinder entry function, ordered in 2-1/2 inch or 2-3/4 inch backset and left or right handing. The Baldwin 6542 Tremont is listed for a 1-3/4 inch door thickness with an entrance function. Baldwin also offers the 6542 Tremont in a double cylinder version if the opening needs a key on both sides, which the Memphis 3302 does not cover.

The Emtek 3302 Memphis is a mortise lock and needs a standard ANSI A115.1 mortise pocket cut into the door edge. On a door with a tubular bore, the Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is a Grade 2 entrance handleset that fits doors 1-3/8 inch to 1-3/4 inch. The Kwikset 687AMD Amador single cylinder keyed entry handleset is another Grade 3 entrance option for 1-3/4 inch doors, and the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob covers 1-3/8 inch to 2 inch doors.

The Emtek 3302 Memphis is built for a 1-3/4 inch door as standard, with thicker doors called out at the time of order. If you would rather buy a set that publishes a thick-door range outright, the Weslock 1411 Traditionale Colonial handleset with Eleganti knob is a single cylinder set covering 1-3/4 inch to 2-1/4 inch doors. The Yale Real Living BYRD226NRRX Assure standalone touchscreen deadbolt with Ridgefield handleset also covers 1-3/4 inch to 2-1/4 inch, though it is a keypad deadbolt set rather than a keyed mortise lock.

Several handlesets share the look and not the function. The Weslock 6695 Belmont handleset with Impresa knob and the Weslock 2815 Hillcrest handleset with New Heaven lever are both dummy function, so they are pull trim with no latch action. The Schlage Residential JE285 Barcelona style handleset with Seville lever is a non-keyed entry function set, and the Schlage JI18/19 interconnected lock with Torino lever is a passage function paired with a separate keyed deadbolt. The Emtek 3302 Memphis is a keyed single cylinder entry mortise lock, available in F20 entrance or F13 dormitory function.

Yes. Keyed alike is an ordering option on the Memphis 3302, so a set of doors can run on one key, and there is a keying-to-code option if you are matching an existing system. The cylinder is Schlage C keyway, so it can be brought into a C-keyway master system. If you want each unit on its own key, order keyed different. For rental turnover, pair that with the F13 dormitory function so the outside trim stays locked.

Yes, and the choice is wide open across the brass program: levers from Stuttgart, Helios, Athena, Hermes, Poseidon, Luzern, Cortina, Milano, Rope and Rustic among others, plus knobs including the Ace, Ace Knurled, Spoke, Orb, Round, Octagon, Egg and Melon, and crystal knobs such as Bristol, Windsor, Diamond, Georgetown and Old Town. The modern L-Square, T-Bar, R-Bar and Conical families come in faceted, hammered, knurled, Tribeca, straight knurled and white marble treatments. Inside trim is a required selection, so pick it when you order.

Eight finishes on the Memphis handleset: Flat Black (US19), French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Satin Nickel (US15) and Unlacquered Brass (US3NL). Two of those behave differently over time. Unlacquered brass is left bare and will patina with handling, which is the point if you want it to age with the door. Polished Brass Lifetime is coated to hold its shine. If you are matching hinges and other trim already on the building, match the US number rather than the finish name.

The 3302 mortise lock is UL Listed with a 180 minute rating, in either the F20 entrance or F13 dormitory function. Note it is a residential-collection set, so on a commercial opening confirm the whole assembly, door, frame and closer, carries the label your inspector needs.

The Emtek 3302 Memphis is a mechanical, non-electronic keyed set on a Schlage C keyway. For an electronic opening, the Yale Real Living BYRD226CBARX Assure Lock Wi-Fi and Bluetooth touchscreen deadbolt with Ridgefield handleset fits 1-3/4 inch to 2-1/4 inch doors, and the BYRD256 CBARX Assure key free touchscreen deadbolt with Ridgefield passage handleset drops the key entirely over the same thickness range. From Kwikset, the 815SCEHFL-CP913CNT San Clemente handleset with Halifax lever pairs a handleset with a contemporary SmartCode keypad electronic deadbolt on a 1-3/4 inch door.

They solve the same opening but are not interchangeable hardware. The Emtek 3302 Memphis is a brass mortise entry handleset on a Schlage C keyway with a UL 180 minute fire rating, ordered by handing. The Kwikset 687AMD Amador is a Grade 3 single cylinder keyed entry handleset for a 1-3/4 inch door, and it is sold as exterior trim only, so the inside trim comes separately; a variant of it is offered on the SC1 keyway. The 3302 Memphis ships as a complete set with latch and strike plate and takes any Emtek brass knob or lever for the inside trim.

Handing is required on the Emtek 3302 Memphis, left or right, because it is a mortise lock. On jobs where you do not want to track handing per opening, the Pamex FS7P31 Lexington single cylinder handleset in satin nickel is an entry set for 1-3/8 inch to 1-3/4 inch doors, and the Deltana 810871 Montego handleset covers 1-3/8 inch to 2 inch. The Kwikset 687BW Belleview single cylinder keyed entry handleset is another straightforward entrance set for 1-3/4 inch doors at Grade 3.

The Emtek 3302 Memphis is a solid brass entry handleset offered in Flat Black, French Antique, Oil Rubbed Bronze, Pewter, Polished Brass, Polished Chrome, Satin Nickel and Unlacquered Brass. Deltana builds several solid brass entry handlesets in the same vein: the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston, all entry function. Those are tubular-style handlesets, while the Memphis 3302 is a mortise lock that mounts into a pocket in the door edge.

The Emtek 3302 Memphis is ordered with an inside knob or lever chosen separately from the Emtek brass trim range, which is how the exterior and interior get matched. If you would rather order a fixed pairing, Baldwin sells the Wesley handleset with the Alcott knob and the Wesley handleset with the Carnaby knob as set entrance combinations. Weslock does the same with the 2810 Hillcrest single cylinder handleset with Hudson knob, a Premiere Essentials set for 1-3/8 inch to 2 inch doors.