Emtek 3002 Memphis Brass Mortise Entrance Handleset - Dummy

It's a dummy. The Memphis 3002 handleset is non-keyed with a dummy lock function, so there is no latch or bolt operation at all. It mounts as a fixed pull with matching interior trim, which is what you want on the inactive leaf of a pair of doors or on a French door that is held by a flush bolt or separate bolt elsewhere. If you need the door to latch, you need the keyed entrance version instead.

Yes, handing is required on all Emtek mortise handlesets, and the Memphis 3002 is built left hand or right hand. Stand outside the door: if the hinges are on your left it's a left hand door, hinges on your right is right hand. Every finish is offered in both LH and RH, so pick the hand first and the finish second.

Standard mortise prep per ANSI A115.1, with a backset of either 2-1/2 or 2-3/4 inches. If your door is already mortise prepped for a standard commercial-style pocket at one of those two backsets, the Memphis set drops into it. A door bored for a tubular handleset will not take it, that prep is a different animal entirely.

A mortise set needs a mortise pocket cut into the door edge, so if the door is bored for a tubular handleset the Memphis 3002 is the wrong part. The Weslock 2815 Hillcrest dummy handleset with New Heaven lever covers 1-3/8 to 2 inch doors, and the Weslock 6695 Belmont dummy handleset with Impresa knob covers 1-3/8 to 2 inch as well. Both are dummy function like the Emtek.

The Emtek 3002 Memphis is a dummy-function mortise handleset, so the door has to carry a standard mortise pocket. If the door is not mortise prepped, the Weslock 2815 Hillcrest is a dummy handleset with New Heaven lever covering 1-3/8 inch to 2 inch doors, and the Weslock 6695 Belmont is a dummy handleset with Impresa knob over the same 1-3/8 inch to 2 inch range. Both are dummy function like the 3002, so no latch or cylinder is involved either way.

The Emtek 3002 Memphis is non-keyed dummy trim with no latch or cylinder, so it will not secure an opening. For a keyed exterior door, the Baldwin Estates 6542 Tremont is available as single cylinder entry mortise trim or as double cylinder entry mortise trim, both for 1-3/4 inch doors, which matches the 1-3/4 inch standard door thickness the 3002 is built around. For tubular prep rather than mortise, the Schlage F60 Addison with Accent lever is a Grade 2 single cylinder keyed entry handleset for 1-3/8 to 1-3/4 inch doors.

You choose it. The Memphis 3002 ships as a complete set, but the inside trim is a required selection from the full Emtek brass knob and lever range, everything from the Ace Knob and Spoke Knob to the Athena, Luzern and Rustic levers, the crystal knobs like Bristol and Windsor, and the L-Square, T-Bar and R-Bar bar levers in faceted, hammered, knurled, Tribeca or white marble. Pick the inside style when you order, it is not a later add-on.

The Memphis mortise handleset carries a UL 180 minute fire rating. That said, this is the dummy function with no latching, and a fire door assembly has to latch to do its job, so a dummy set is normally used on an inactive leaf or a non-latching application. Match the function to what the opening actually requires.

Both are solid brass handlesets. The Emtek 3002 Memphis is brass substrate in an American Classic style and is supplied as dummy trim with an inside knob or lever of your choosing. The Deltana solid brass entry handlesets - the 803871B Hanover, 815871 St. Ann and 825871 Kingston - are entry function, so they operate on an active door. The practical split is function: dummy versus entry, not material.

They are not the same function. The Emtek 3002 Memphis is dummy trim - fixed, with no latching action at all. The Schlage JE285 Barcelona with Seville lever is listed as a Grade 2 non-keyed entrance handleset for 1-3/8 to 1-3/4 inch doors, meaning it still operates a latch even though it takes no key. Choose the 3002 for an inactive or fixed panel and the JE285 where the door needs to latch closed without keying.

The Emtek 3002 Memphis is built to 1-3/4 inch standard and a thicker door has to be called out when ordering. If you would rather use a handleset that publishes a thicker range outright, the Weslock 1411 Traditionale Colonial with Eleganti knob covers 1-3/4 inch to 2-1/4 inch doors as a single cylinder keyed entry, and the Deltana 810871 Montego handleset covers 1-3/8 inch to 2 inch. Note those are keyed or latching sets rather than dummy trim.

The Emtek 3002 Memphis is a mechanical, non-electronic dummy set. For a powered opening, the Yale Assure BYRD226NRRX pairs a standalone touchscreen deadbolt with the Ridgefield handleset for 1-3/4 to 2-1/4 inch doors, and the BYRD226CBARX is the Wi-Fi and Bluetooth version over the same range. The Kwikset 815SCEHFL-CP913CNT San Clemente handleset with Halifax lever carries a SmartCode keypad deadbolt for 1-3/4 inch doors.

Yes. Handing must be specified left or right on the Emtek 3002 Memphis, as it does on all mortise locks, and it ships in LH and RH across finishes from Oil Rubbed Bronze US10B to Unlacquered Brass US3NL. By contrast the Sure-Loc tubular handlesets - Aspen AN507, Alta AT507, Coral CR507 and Madison MA507 - are specified around an adjustable backset instead. If you want to avoid committing to a hand at order time, the tubular route is the simpler order.

Solid brass, both material and substrate, from Emtek's Brass collection. That matters for an exterior door in a coastal or high-traffic setting, and it's why the unlacquered option can patina naturally rather than flaking the way plated pot metal does.

Residential. Emtek classes the Memphis brass mortise handleset as a residential product in an American Classic style, so it suits high-end homes, multi-family front doors and hospitality entries rather than a heavy-traffic commercial opening spec'd to a BHMA grade.

That's the point of the inside trim selection. Because the Memphis 3002 takes any Emtek brass knob or lever for the interior, you can run the same lever style, say Luzern or Milano, on the front door handleset and on the passage and privacy sets down the hall, in the same finish. Choosing from the eight finishes consistently is what keeps a whole opening package looking like one set.

The Emtek 3002 Memphis is a brass mortise set requiring handing and a mortise pocket, ordered with your choice of inside knob or lever. For a straightforward keyed tubular replacement, the Kwikset 687 Amador and 687 Belleview single cylinder handlesets are Grade 3 entry sets for 1-3/4 inch doors, sold as exterior trim only, and the Master Lock HDLB series HDLBA0615/4D is a Grade 2 single cylinder deadbolt handleset. The Pamex FS7P31 Lexington single cylinder handleset in satin nickel covers 1-3/8 to 1-3/4 inch doors.

Not functionally. The Baldwin Wesley handleset is offered as an entrance set with either the Alcott knob or the Carnaby knob as inside trim. The Emtek 3002 Memphis is dummy function, so it has no latch and no key. The two are alike in being handlesets paired with a selectable interior knob or lever, but the Wesley is for an active, latching door while the 3002 is for a fixed or inactive panel.