Emtek 3007 Regency Brass Mortise Entrance Handleset - Dummy

The 3007 Regency is a dummy handleset, so it is non-keyed and has no operating latch. It is a surface-mounted pull with matching inside trim for an inactive leaf of a double door, a closet, or a fixed panel. If the door has to latch or lock, you need the entrance version of the Regency handleset instead.

Yes. Handing is required on all Emtek mortise handlesets, and the 3007 Regency is ordered as Left Hand (LH) or Right Hand (RH). Stand outside the door: if the hinges are on your left it is a left hand, hinges on the right is a right hand. Get it wrong and the handle geometry will be reversed on the door.

It is built for 1-3/4 inch doors as standard, which is the usual thickness for an exterior entry door. Thicker doors are accommodated, but the thickness has to be called out at the time of order so the spindles and mounting posts come the right length. There is a door thickness entry on the order form for exactly that.

Three things: the finish, the handing, and the inside knob or lever. The inside trim is a required selection and the Regency accepts any Emtek brass knob or lever, roughly ninety styles ranging from the Round and Egg knobs to the Milano, Cortina and Athena levers, plus crystal options like the Windsor and Georgetown. Door thickness is a fourth entry if the door is over 1-3/4 inches. The set ships complete with both sides.

That is the normal use for it. Order the 3007 dummy for the inactive leaf and the keyed Regency mortise entrance handleset for the active leaf in the same finish and the same inside knob or lever style, and the pair reads as a matched set. Watch the handing: on a double door the two leaves are opposite hands, so one goes LH and the other RH.

The Weslock 2815 Hillcrest is also a dummy-function handleset, paired with the New Heaven lever and part of the Premiere Essentials Series, with a door thickness range of 1-3/8 inch to 2 inch. The Weslock 6695 Belmont is another dummy handleset, supplied with the Impresa knob in the Elegance Series and covering 1-3/8 inch to 2 inch doors. Both are dummy trim like the Emtek 3007 Regency, meaning no latch and no cylinder. The Emtek 3007 differs in that it is brass and uses a standard mortise door prep to ANSI A115.1, while the Weslock units are tubular-style handlesets.

The Emtek 3007 Regency is a dummy, non-keyed handleset, so it will not lock a door. For a keyed opening, the Schlage Residential F60 Addison with Accent lever is a single cylinder keyed entry handleset in the F Series, Grade 2, fitting 1-3/8 inch to 1-3/4 inch doors. The Weslock 1411 Traditionale Colonial with Eleganti knob is a single cylinder keyed entry for 1-3/4 inch to 2-1/4 inch doors. The Sure-Loc Aspen AN507 is a single cylinder keyed entry handleset with an adjustable backset.

The Emtek 3007 Regency requires a standard mortise pocket to ANSI A115.1. On a door bored for tubular hardware, the Sure-Loc Alta AT507 is a tubular handleset with an adjustable backset, and the Sure-Loc Coral CR507 and Madison MA507 are likewise handlesets with adjustable backsets. The Pamex FS7P31 Lexington single cylinder entry handleset covers 1-3/8 inch to 1-3/4 inch doors. These avoid cutting a mortise pocket, which the Emtek 3007 needs.

Emtek catalogs the 3007 Regency as residential hardware. For a commercial opening under a spec that calls out an ANSI/BHMA grade, look at graded alternatives such as the Schlage Residential F60 Addison or the Master Lock HDLB series handleset, both listed as Grade 2. The Regency is aimed at high-end homes, not traffic-rated commercial entries.

It can be built for a thicker door, but you have to state the thickness when ordering rather than assume the standard set will reach. If you would rather order off the shelf for a heavy slab, the Weslock 1411 Traditionale Colonial handleset covers 1-3/4 to 2-1/4 inches as published, and the Yale Ridgefield handleset assemblies list the same 1-3/4 to 2-1/4 inch range.

No. It is non-keyed with no cylinder, so there is nothing to key and no keyway to match. The keyed Regency mortise entrance handlesets use a Schlage C keyway, which matters only if you are pairing the dummy with a keyed one and want the rest of the house on one key.

The Emtek 3007 Regency is a brass handleset offered in finishes including Oil Rubbed Bronze US10B, Satin Nickel US15, Polished Chrome US26, Polished Brass US3 and Unlacquered Brass US3NL. In solid brass, Deltana offers the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston, all entry-function handlesets, plus the 810871 Montego for 1-3/8 inch to 2 inch doors. The Deltana units are entry function, while the Emtek 3007 is dummy trim.

Not directly. The Baldwin Estates 6542 Tremont is mortise trim offered in single cylinder and double cylinder entry versions for 1-3/4 inch doors, so it is a keyed entrance product. The Emtek 3007 Regency is a dummy handleset with no cylinder and no keying. If the opening is a functioning mortise entry, the Baldwin 6542 is the closer match; if the door is an inactive or false leaf, the Emtek 3007 dummy is the correct type.

The Emtek 3007 Regency is a non-electronic, dummy-function mortise handleset. For keypad entry, the Kwikset 815SCEHFL-CP913CNT San Clemente pairs a Halifax lever handleset with a contemporary SmartCode keypad electronic deadbolt for 1-3/4 inch doors. Yale Real Living BYRD226NRRX is a standalone touchscreen deadbolt with the Ridgefield handleset for 1-3/4 inch to 2-1/4 inch doors, and BYRD226CBARX is the Wi-Fi and Bluetooth version over the same thickness range.

The Emtek 3007 Regency is dummy trim, so it is fixed and does not operate a latch. The Schlage Residential JE285 Barcelona with Seville lever is a non-keyed entry function handleset in the J Series, Grade 2, for 1-3/8 inch to 1-3/4 inch doors, so it retains a working latch without a cylinder. The Yale BYRD256 CBARX pairs a Ridgefield passage handleset and trim with a key-free touchscreen deadbolt for 1-3/4 inch to 2-1/4 inch doors.

The Emtek 3007 Regency requires handing - left hand or right hand must be specified, as with all mortise locks. Tubular-style substitutes are generally ordered without a hand: the Sure-Loc Alta AT507, Coral CR507 and Madison MA507 are specified by adjustable backset rather than by hand, and the Kwikset 687AMD Amador and 687BW Belleview are exterior-only single cylinder handlesets for 1-3/4 inch doors rated Grade 3. If you do not yet know the swing, a non-handed tubular handleset removes that decision.

The Emtek 3007 Regency is a residential brass handleset. If you need a stated ANSI grade, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset in the HDLB Series is Grade 2, and the Schlage Residential F60 Addison with Accent lever is Grade 2 in the F Series for 1-3/8 inch to 1-3/4 inch doors. Kwikset 687AMD Amador and 687BW Belleview are Grade 3 for 1-3/4 inch doors.

The Emtek 3007 Regency is built for 1-3/4 inch doors as standard, and a thicker door can be specified when ordering. Among alternatives, the Weslock 1411 Traditionale Colonial with Eleganti knob covers 1-3/4 inch to 2-1/4 inch, and the Yale BYRD226CBARX Assure Lock with Ridgefield handleset also spans 1-3/4 inch to 2-1/4 inch. The Weslock 2810 Hillcrest single cylinder with Hudson knob covers 1-3/8 inch to 2 inch.

Seven: Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), French Antique (US7), Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A) and Polished Chrome (US26). Unlacquered Brass is the one that will patina over time rather than hold its shine, so pick it deliberately. Every finish is offered in both left and right hand.

Yes. Emtek publishes mortise lock installation instructions and a technical specification sheet covering dimensions and door thickness for its brass UL mortise entrance handlesets, both linked from the product record. Worth pulling the dimension sheet before you cut, since the mortise pocket and escutcheon holes have to line up on a door that is expensive to redo.

No. The Baldwin Wesley handleset is an entrance-function set, offered paired with the Alcott knob or the Carnaby knob. The Emtek 3007 Regency is dummy function with no cylinder, and it is a mortise handleset requiring a standard mortise prep to ANSI A115.1 and a specified hand. Choose the Baldwin Wesley for a working entry door and the Emtek 3007 where the leaf is fixed.