Emtek 3051 Harrison Brass Mortise Entrance Handleset - Dummy

The Harrison 3051 is a dummy handleset, so there is no latch and no cylinder. It is fixed trim that mounts to the door face for pull only, typically the inactive leaf of a double door or a door held closed by a roller catch or ball catch. If you need the leaf to latch and key, you want the keyed entrance version of the Harrison mortise handleset instead.

Yes, left or right hand has to be stated on the order. Emtek requires handing on all its mortise handlesets, and the 3051 Harrison is built either LH or RH in every finish offered, so a wrong call means the wrong part. Stand outside the door on the side the handleset mounts: if the hinges are on your left it is left hand, hinges on the right is right hand.

Standard mortise prep to ANSI A115.1, with a 2-1/2 inch or 2-3/4 inch backset depending on which the door is cut for. That is the same pocket a commercial mortise body drops into, so a door already prepped for a mortise lock takes it. A door bored for a cylindrical lock (a 2-1/8 inch cross bore) will not, and cannot be converted in the field without a mortise jig or a new slab.

Three things, and all of them are on the order: finish, handing, and the inside knob or lever. The interior trim is a required selection with roughly ninety Emtek styles to pick from, spanning levers (Stuttgart, Athena, Luzern, Milano, Rustic), knobs (Ace, Orb, Round, Egg, Victoria), and crystal knobs (Bristol, Windsor, Georgetown, Old Town). Door thickness is an optional entry, used when the door is thicker than 1-3/4 inches. It ships as a complete set with the interior trim you pick.

The Harrison 3051 is a mortise dummy, so it needs a real mortise pocket cut into the door edge. If your inactive leaf is not already mortise prepped, a surface-mounted dummy handleset is far less work. In that vein we carry the Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever and the Weslock 6695 Belmont Dummy Handleset with Impresa Knob, both rated for 1-3/8 to 2 inch doors, which is a wider thickness window than the Emtek's 1-3/4 inch standard build. Go Emtek when you want solid brass and a matched finish across the pair.

The Emtek 3051 Harrison is a non-keyed dummy, so it does not latch or lock. For a keyed opening, the Baldwin Estates 6542 Tremont single cylinder entry mortise trim is an entrance function mortise trim for 1-3/4 inch doors, and the Baldwin Estates 6542 Tremont double cylinder version is the same trim in a double cylinder entry. Both keep the mortise prep, which matters if the active leaf is already mortised. If the door is bored rather than mortised, the Schlage Residential F60 Addison handleset with Accent lever is a Grade 2 keyed entry for 1-3/8 inch to 1-3/4 inch doors.

They are not interchangeable. The Emtek 3051 Harrison is a mortise handleset in brass that needs a standard ANSI A115.1 mortise pocket and handing specified. The Kwikset 687AMD Amador single cylinder handleset is a Grade 3 bored entrance handleset for 1-3/4 inch doors, exterior trim only, and the Schlage Residential JE285 Barcelona handleset with Seville lever is a Grade 2 non-keyed entry for 1-3/8 inch to 1-3/4 inch doors. Swapping either onto a mortised door leaves the mortise pocket unfilled, and swapping the Emtek onto a bored door means cutting a new mortise.

Eight, and each one is stocked in both hands: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), and French Antique (US7). The set is solid brass, and the unlacquered brass option is the one that will patina over time rather than hold its shine, which matters if you are trying to match existing aged hardware on a house.

The keyed Harrison mortise entrance handleset is the mate. It runs the same finishes and the same interior trim styles, and it uses a Schlage C keyway, so it can be keyed alike with other Schlage C cylinders already on the property. Order the dummy for the inactive leaf and the keyed version for the active one, in the same finish and the same interior knob or lever, and the pair reads as one set.

For a spec that names a grade, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is Grade 2 entrance function, the Schlage Residential F60 Addison with Accent lever is Grade 2 entrance for 1-3/8 inch to 1-3/4 inch doors, and the Kwikset 687BW Belleview single cylinder handleset is Grade 3 entrance for 1-3/4 inch doors. The Emtek 3051 Harrison is a residential brass mortise handleset carrying a UL 180 minute fire rating with an ANSI F20 or F13 function.

The Emtek 3051 Harrison is non-electronic and non-keyed. For a powered opening, the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset is a standalone unit for 1-3/4 inch to 2-1/4 inch doors, and the BYRD226CBARX pairs the same Ridgefield handleset with a Wi-Fi and Bluetooth deadbolt over the same thickness range. The Kwikset 815SCEHFL-CP913CNT San Clemente handleset with Halifax lever ships as a handleset with electronic deadbolt for 1-3/4 inch doors.

The Emtek 3051 Harrison is built for 1-3/4 inch doors as standard with thicker doors specified at order. If you would rather order a handleset that already publishes the wider range, the Weslock 1411 Traditionale Colonial handleset with Eleganti knob covers 1-3/4 inch to 2-1/4 inch as a single cylinder, and the Deltana 810871 Montego handleset covers 1-3/8 inch to 2 inch. The Weslock 2815 Hillcrest dummy also covers 1-3/8 inch to 2 inch if the door is a dummy application.

The Emtek 3051 Harrison is a brass mortise handleset in an American Classic style, available in finishes including unlacquered brass (US3NL), polished brass lifetime (US3), and French antique (US7). In solid brass entry handlesets, the Deltana 803871B Hanover, the Deltana 815871 St. Ann, and the Deltana 825871 Kingston are all entry function solid brass handlesets. The Deltana units are entry function rather than dummy, so they latch the door where the Emtek 3051 Harrison does not.

The Emtek 3051 Harrison ships as a complete set with the inside knob or lever style chosen at order, from options including the Stuttgart lever, Athena lever, and Round knob, but it is a dummy so nothing retracts. If the door needs to latch without a key, the Schlage Residential JE285 Barcelona handleset with Seville lever is a Grade 2 non-keyed entry function handleset for 1-3/8 inch to 1-3/4 inch doors, and the Schlage Residential JI18/19 with Torino lever is a passage function interconnected lock with a keyed deadbolt over the same thickness range.

The Emtek 3051 Harrison requires handing specified as left or right and is stocked as LH and RH in each finish, including oil rubbed bronze (US10B) and satin nickel (US15), because handing is required for all mortise locks. Bored alternatives such as the Pamex FS7P31 Lexington single cylinder handleset for 1-3/8 inch to 1-3/4 inch doors and the Weslock 2810 Hillcrest single cylinder with Hudson knob for 1-3/8 inch to 2 inch doors are entry handlesets that do not carry a mortise case, so the ordering decision there is thickness rather than a mortise hand.

Emtek styles the Harrison as American Classic, and it is solid brass throughout rather than plated zinc. The eight finishes cover both the traditional end (Polished Brass, Unlacquered Brass, French Antique) and the current darker looks (Flat Black, Oil Rubbed Bronze, Pewter). Because the interior trim is a separate choice, you can run a period crystal or egg knob inside on an older home and a plain lever on a newer one without changing the exterior handleset.

The Baldwin Wesley handleset with Alcott knob and the Baldwin Wesley handleset with Carnaby knob are both entrance function, so they carry a working latch and are prepped accordingly. The Emtek 3051 Harrison is a dummy in the Harrison series, which is the usual choice for an inactive leaf or a fixed panel where a latch would be in the way. Using an entrance handleset in a dummy position means the latch has to be dealt with in the frame.