Emtek 3008 Craftsman Brass Mortise Entrance Handleset - Dummy

The 3008 Craftsman is a dummy handleset, so it is non-keyed and does not latch. It mounts to the door as fixed trim, which is what you want on an inactive leaf of a double door, a French door slab that is held by a separate flush bolt or roller catch, or a closet or pantry door where you only need the look and a pull. If you need the door to actually latch and lock, you need the keyed mortise entrance version instead.

Yes, handing is required on all Emtek mortise locks, and the 3008 Craftsman is ordered as left hand or right hand. Stand outside the door: if the hinges are on your left it is left hand, hinges on the right is right hand. Get it wrong and the set will not sit correctly on the door, so settle handing before anything else.

Standard mortise prep to ANSI A115.1, with a 2-1/2 inch or 2-3/4 inch backset. If your door is already mortised for an ANSI A115.1 lock body, the pocket is right; check which of the two backsets your existing prep uses before ordering. A door bored for a tubular handleset will not take this without being re-prepped for a mortise pocket.

Yes, and you have to. The 3008 Craftsman ships as a complete set with the exterior Craftsman grip plus an interior trim of your choosing, selected from the full Emtek brass knob and lever range. That covers levers like Stuttgart, Athena, Luzern, Cortina and Rustic, knobs like the Ace, Spoke, Egg and Providence, crystal knobs such as Windsor and Bristol, and the L-Square, T-Bar and R-Bar families in finishes like knurled, hammered and white marble. Pick the interior style at the same time you pick the exterior finish.

The Emtek 3008 Craftsman is non-keyed dummy trim, so it will not lock a door. For a keyed opening, the Baldwin Estates 6542 Tremont single cylinder entry mortise trim is an entrance-function mortise set for 1-3/4 inch doors, and the Baldwin Estates 6542 Tremont double cylinder version covers openings that need a key both sides. If a tubular set is acceptable, the Schlage Residential F60 Addison with Accent lever is a Grade 2 keyed entry handleset for 1-3/8 to 1-3/4 inch doors.

The Emtek 3008 Craftsman is built for standard ANSI A115.1 mortise prep with 1-3/4 inch doors standard, so a non-mortised or thicker door usually calls for a tubular set. The Weslock 2815 Hillcrest and Weslock 6695 Belmont both cover 1-3/8 inch to 2 inch doors, the Deltana 810871 Montego handleset covers 1-3/8 inch to 2 inch, and the Weslock 1411 Traditionale Colonial with Eleganti knob covers 1-3/4 inch to 2-1/4 inch as a single cylinder set.

Four: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19) and Unlacquered Brass (US3NL). Unlacquered brass is a living finish and will patina with handling, so if you are matching a fleet of doors that were installed years ago, that is usually the one that drifts. The other three are stable.

For a keyed mortise opening, the Baldwin Estates 6542 Tremont entry mortise trim is available in single cylinder and double cylinder, both listed for 1-3/4 inch doors, the same thickness the Emtek 3008 is built around. Double cylinder means a key on both sides, which some jurisdictions restrict on an exit door, so confirm your local code before choosing it.

The Emtek 3008 Craftsman is a brass mortise handleset sold as a complete set with a required handing and a choice of inside knob or lever. For a solid brass tubular entry handleset instead, Deltana offers the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston, all entry function solid brass handlesets in fixed styles rather than mortise sets with handing and interior trim selection.

The Emtek 3008 Craftsman is a non-electronic dummy handleset, so it has no keypad or credential option. If the opening needs electronic access, the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset and the BYRD226CBARX Wi-Fi and Bluetooth version both fit 1-3/4 inch to 2-1/4 inch doors, and the Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs a Halifax lever with a SmartCode keypad deadbolt on 1-3/4 inch doors.

The Emtek 3008 Craftsman is a mortise set with a 2-1/2 inch or 2-3/4 inch backset selected at order. If the bore is already cut and you need field adjustment, Sure-Loc offers the Aspen AN507 single cylinder keyed entry, the Madison MA507 keyed entry, the Alta AT507 tubular, and the Coral CR507, all handlesets with adjustable backset.

The Emtek 3008 Craftsman is a residential brass mortise handleset carrying a UL 180 minute fire rating with standard ANSI A115.1 mortise door prep. Among tubular residential comparables, the Schlage Residential F60 Addison and JE285 Barcelona are Grade 2, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is Grade 2, and the Kwikset 687AMD Amador and 687BW Belleview exterior handlesets are Grade 3.

Exterior-only trim is the common mix-up. The Kwikset 687AMD Amador and 687BW Belleview are sold as exterior-only single cylinder keyed handlesets, so they include neither the interior trim nor the non-latching dummy function of the Emtek 3008 Craftsman, which is sold as a complete set with your choice of inside knob or lever. The Schlage JE285 Barcelona with Seville lever is non-keyed but is an entrance-function set, not dummy trim.

The Craftsman mortise entrance handlesets run the Schlage C keyway, which matters if you are doing a house or a building where the dummy sets go on the French doors and the keyed sets go on the entries. Schlage C is a common residential keyway, so the keyed openings can be keyed alike into an existing Schlage C system.