Emtek 3049 Craftsman Full Length Brass Mortise Entrance Handleset - Dummy

The 3049 Craftsman is a dummy handleset, so it is non-keyed and does not latch or lock. There is no working latch or bolt behind it. It mounts to the face of the door as fixed trim, which is what you want on the inactive leaf of a pair of French or double doors, or on a door held closed by a roller catch or flush bolts. If you need the door itself secured, you need an entrance function set, not this one.

Yes, handing is required. The 3049 is sold left hand or right hand, and it is not field reversible on the order form. Stand outside the door, on the side the handleset shows: if the hinges are on your left it is left hand, hinges on your right is right hand. Get this wrong on a pair of doors and the thumbpiece and grip end up on the wrong side of the leaf.

Inside trim is a choice you make, not a fixed part of the set. The 3049 takes any Emtek brass knob or lever for the interior, and it ships as a complete set with whatever you select. That runs from Craftsman appropriate options like the Arts and Crafts Lever and Hammered Lever through to the Ace Knurled Knob, Spoke Knob, L-Square and T-Bar families, and crystal knobs like Bristol and Windsor if you want the inside to read differently from the exterior.

The Weslock 6695 Belmont Dummy Handleset with Impresa Knob and the Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever are both dummy-function handlesets, the same function the Emtek 3049 Craftsman is built as. The 6695 Belmont is in Weslock's Elegance Series and the 2815 Hillcrest is in the Premiere Essentials Series, and both list a 1-3/8 inch to 2 inch door thickness range. The 3049 is a brass mortise handleset prepped to standard mortise ANSI A115.1 with a 2-1/2 inch or 2-3/4 inch backset, so the Weslock dummies are a match on function rather than on door prep - they do not need a mortise pocket.

The Emtek 3049 Craftsman is a non-keyed dummy, so it does not latch or lock. For a keyed opening, the Schlage Residential F60 Addison Single Cylinder Keyed Entry Handleset with Accent Lever is a Grade 2 entrance handleset for 1-3/8 inch to 1-3/4 inch doors, and the Weslock 1411 Traditionale Colonial Handleset with Eleganti Knob is a single cylinder unit for 1-3/4 inch to 2-1/4 inch doors. Both are bored-door handlesets, so an opening already mortised for the 3049 would need a different door prep.

The Emtek 3049 Craftsman is built for 1-3/4 inch doors as standard, with thicker doors specified at order. Peers that publish a range reaching 2 inches include the Weslock 6695 Belmont dummy and Weslock 2815 Hillcrest dummy at 1-3/8 inch to 2 inch, the Weslock 2810 Hillcrest single cylinder at 1-3/8 inch to 2 inch, the Deltana 810871 Montego at 1-3/8 inch to 2 inch, and the Weslock 1411 Traditionale Colonial at 1-3/4 inch to 2-1/4 inch.

Center to center is 5-1/2 inches on the 3049 Craftsman. That is the dimension that decides whether it covers the prep already in your door. On a dummy application there is no mortise pocket or bore to worry about, but the mounting holes still have to line up with, or fall clear of, whatever was drilled before.

Four finishes: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), and Unlacquered Brass (US3NL). Worth knowing that Unlacquered Brass is a living finish, so it will darken and patina with handling rather than staying bright, which suits an Arts and Crafts entry but is not the choice if you want every door in the house to stay matched and uniform over time.

The 3049 Craftsman is the dummy in the brass mortise entrance handleset family, and it is built to the same full length Craftsman plate so it reads identically alongside a working mortise entry set of the same style and finish. Order both in the same finish and the same interior knob or lever, and the active and inactive leaves match. Handing is called out separately on each leaf.

For a dummy handleset that is not Arts and Crafts, ZenSupply carries the Weslock 6695 Belmont Dummy Handleset with Impresa Knob and the Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever, both from the Weslock lines and both rated for doors from 1-3/8 to 2 inches. The wider thickness range on those two is the practical difference: the Emtek 3049 is built to 1-3/4 inches as standard with thicker doors called out on the order, while the Weslock sets cover the range as supplied. The Emtek is the one to pick if you want solid brass and a full length Craftsman plate.

You need an entrance function set, not a dummy. Among what ZenSupply stocks, the Schlage Residential F60 Addison Single Cylinder Keyed Entry Handleset with Accent Lever is Grade 2 and fits 1-3/8 to 1-3/4 inch doors, and the Baldwin Estates 6542 Tremont is available in single cylinder or double cylinder entry mortise trim at 1-3/4 inch. Double cylinder means keyed on both sides, which some jurisdictions restrict on a residential egress door, so pick single cylinder unless you specifically want the inside keyed too.

The Emtek 3049 Craftsman is a non-electronic set. For a keypad opening, the Yale Real Living BYRD226NRRX Assure Lock Standalone Touchscreen Deadbolt with Ridgefield Handleset and the BYRD226CBARX Wi-Fi and Bluetooth version both cover 1-3/4 inch to 2-1/4 inch doors, and the Kwikset 815SCEHFL-CP913CNT San Clemente Handleset with Halifax lever trim pairs a Contemporary SmartCode keypad deadbolt with the handleset for 1-3/4 inch doors. These are deadbolt-plus-handleset assemblies rather than mortise hardware, so the door prep differs from the 3049.

Handlesets that latch are not interchangeable with the Emtek 3049 Craftsman on an inactive or false door leaf. The Kwikset 687AMD Amador and 687BW Belleview are single cylinder keyed entry handlesets supplied exterior only, and the Baldwin Wesley Handleset paired with the Alcott or Carnaby knob is entrance function. The 3049 is a non-keyed dummy sold as a complete set with the inside knob or lever chosen at order, which is what an inactive leaf needs.

The Deltana 810871 Montego Handleset covers a 1-3/8 inch to 2 inch door thickness range, and the Deltana 803871B Hanover, 815871 St. Ann and 825871 Kingston are solid brass entry handlesets. The Emtek 3049 Craftsman is a brass mortise handleset requiring standard mortise ANSI A115.1 door prep and handing specified left or right, so the Deltana sets stay in brass while working on a bored door instead of a mortise pocket.

The Schlage Residential JE285 Barcelona Style Handleset with Seville Lever is a non-keyed entry function handleset in the J Series, Grade 2, for 1-3/8 inch to 1-3/4 inch doors. The Emtek 3049 Craftsman is also non-keyed but is dummy function, meaning it has no operating latch at all, while the JE285 is a latching passage-style set. The 3049 is a mortise unit with a 5-1/2 inch center-to-center handle dimension in the Craftsman series.

No, the 3049 is purely mechanical trim with no electronics. If you want a keypad or app-controlled entry with a handleset look, ZenSupply carries the Yale Real Living Assure Lock line with the Ridgefield handleset, including the BYRD226NRRX standalone touchscreen deadbolt and the BYRD226CBARX with Wi-Fi and Bluetooth, both covering 1-3/4 to 2-1/4 inch doors. Kwikset's 815SCEHFL San Clemente handleset with Contemporary SmartCode keypad deadbolt is another, at 1-3/4 inch.

That is exactly its design language. The 3049 is Emtek's Craftsman series, styled Arts and Crafts, with a full length plate in solid brass. Oil Rubbed Bronze and Unlacquered Brass are the two finishes that read most period-correct for a bungalow or Craftsman entry, and pairing it with the Arts & Crafts Lever or Hammered Lever inside keeps the theme consistent through the opening.

The Emtek 3049 Craftsman is a single mortise unit in dummy function. For a two-piece arrangement, the Master Lock HDLBA0615/4D in the HDLB Series is a Grade 2 single cylinder deadbolt handleset in entrance function, and the Yale BYRD256 CBARX Assure Key Free Touchscreen Deadbolt pairs with a Ridgefield passage handleset and trim for 1-3/4 inch to 2-1/4 inch doors. Both put the locking function in a deadbolt separate from the handle, unlike the mortise body the 3049 uses.

The Emtek 3049 Craftsman is offered in Satin Nickel (US15) along with Oil Rubbed Bronze (US10B), Flat Black (US19) and Unlacquered Brass (US3NL), in both left and right hand. The Pamex FS7P31 Lexington Single Cylinder Handleset is supplied in a satin nickel finish for 1-3/8 inch to 1-3/4 inch doors, and the Schlage Residential JI18/19 Interconnected Passage Lock with Torino Lever is in satin stainless steel for the same thickness range.