You may also like
Emtek 3308 Craftsman Brass Mortise Entrance Handleset - Entry Set
Model: EMTEK-3308
Emtek 3308 Craftsman Brass Mortise Entrance Handleset - Entry Set- Can be ordered with any Brass Knob or Lever for the inside trim- Sold as complete set. Includes Latch and Strike Plate- 2-1/2" or...
Emtek
Starting at
$1,081.00
$864.80
Emtek 3049 Craftsman Full Length Brass Mortise Entrance Handleset - Dummy
Model: EMTEK-3049
Emtek 3049 Craftsman Full Length Brass Mortise Entrance Handleset - Dummy- Can be ordered with any Brass Knob or Lever for the inside trim- Sold as complete set. - Handing required for All Mortise...
Emtek
Starting at
$818.00
$654.40
Emtek 3338 Hercules Knurled Full Length Mortise Entrance Handleset,Brass - Entry Set
Model: EMTEK-3338
Emtek 3338 Hercules Knurled Full Length Mortise Entrance Handleset,Brass - Entry Set- Can be ordered with any Brass Knob or Lever for the inside trim- Sold as complete set. Includes Latch and Strike...
Emtek
Starting at
$1,155.00
$924.00
Emtek 3336 Hercules Smooth Full Length Mortise Entrance Handleset - Entry Set
Model: EMTEK-3336
Emtek 3336 Hercules Smooth Full Length Mortise Entrance Handleset - Entry Set- Can be ordered with any Brass Knob or Lever for the inside trim- Sold as complete set. Includes Latch and Strike Plate-...
Emtek
Starting at
$1,081.00
$1,046.29
Emtek 3326 Rectangular Full Length Sandcast Bronze Mortise Entrance Handleset - Entry Set
Model: EMTEK-3326
Emtek 3326 Rectangular Full Length Sandcast Bronze Mortise Entrance Handleset - Entry Set- Can be ordered with any Sandcast Bronze Knob or Lever for the inside trim- Sold as complete set. Includes...
Emtek
$1,297.00
$1,037.60
Emtek 3349 Craftsman Full Length Brass Mortise Entrance Handleset - Entry Set
- Can be ordered with any Brass Knob or Lever for the inside trim
- Sold as complete set. Includes Latch and Strike Plate
- 2-1/2" or 2-3/4" Backsets
- Standard Mortise Door Prep ANSI A115.1
- UL Listed Mortise with ANSI F20 or F13 Function
- Schlage C Keyway
- Handing required for All Mortise Locks
Specifications:
- Backset: 2-1/2" or 2-3/4"
- Door Prep: Standard Mortise ANSI A115.1
- UL Function: ANSI F20 or F13
- Door Thickness: 1-3/4" standard (specify if thicker)
- Keyway: Schlage C
- Handing: Required – specify left or right
- Fire Rating: UL 180 minute
Manufacturer Resources
Mortise Lock Installation Instructions
Product Specs
- Subcategory:
- Mortise Entry Sets
- Collection:
- Brass
- Product Type:
- Handlesets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Mortise Locks and Trim
- Commercial/Residential:
- Residential
- Lock Type:
- Mortise
- Lock Function:
- Entry
- Series:
- Craftsman
- Theme:
- Arts & Crafts
- Electronic:
- No
- Keyed:
- Yes
- Handle Type:
- Handleset
- Keyed Function:
- Single Cylinder
- MAP Policy:
- Yes
- Product Model:
- 3349
- (CTC) Center-to-Center:
- 5-1/2"
- Product Function:
- Entry
- Product Style:
- Arts & Crafts
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek F20-3349-75-RH-US19 – Frequently Asked Questions
1) Will the Emtek 3349 Craftsman handleset fit a standard 1-3/4 inch exterior door?
Yes. The 3349 Craftsman mortise entrance handleset is built for 1-3/4 inch doors as standard, and thicker doors are handled by specifying the thickness when you order. It goes into a standard mortise pocket cut to ANSI A115.1, so if the door is already prepped for a mortise lock body you are working to the same prep. Backset is either 2-1/2 or 2-3/4 inches, and the pocket has to match the backset you order.
2) Which backset do I order for an Emtek 3349 mortise handleset, 2-1/2 or 2-3/4 inch?
Measure from the door edge to the center of the existing lock's cylinder or knob hub. That distance is the backset, and the 3349 is made in 2-1/2 inch and 2-3/4 inch. It is a mortise lock, so the backset is fixed by the lock case, not adjustable in the field. Order the one that matches the pocket already cut in the door, or, on a new door, cut the pocket to the backset you ordered.
3) What is the difference between the F20 and F13 function on the Emtek 3349 handleset?
Both functions are offered on the 3349. F20 is the standard entrance function, which is what most houses want on a front door. F13 is the dormitory function. Pick the function on the order, since it is determined by the mortise lock case inside the door and cannot be swapped by changing the trim later.
4) Will the Emtek 3349 key alike with my existing Schlage keys?
The 3349 uses a Schlage C keyway, which is the standard residential Schlage keyway, so it can be keyed into an existing Schlage C system. It is a single cylinder entry set, keyed outside with a thumbturn inside. Keyed alike or keyed different is chosen at order, and you can supply a key code if you are matching an existing system.
5) My door is 1-3/8 inches thick. Can I still use the Emtek 3349 handleset?
1-3/8 inch is outside what the 3349 is set up for. It is built to 1-3/4 inch standard with thicker doors accommodated on request, so a thin door is the wrong direction. For a 1-3/8 inch door, the Pamex FS7P31 Lexington single cylinder handleset covers 1-3/8 to 1-3/4 inch, and the Deltana 810871 Montego covers 1-3/8 to 2 inch. Both are tubular sets, not mortise, so the door prep is different.
6) What is the closest alternative to the Emtek 3349 Craftsman handleset for a door already prepped for a mortise lock?
The Baldwin Estates 6542 Tremont entry mortise trim is the closest peer, and it comes in both a single cylinder version (6542ENTR) and a double cylinder version (6542DBLC), both entrance function and both listing a 1-3/4 inch door thickness. The Emtek 3349 is a mortise lock handleset in brass, single cylinder keyed entry, with a 2-1/2 inch or 2-3/4 inch backset and standard mortise door prep to ANSI A115.1. If the opening needs a keyed cylinder on the inside as well, the 6542DBLC is the double cylinder route; the 3349 is single cylinder.
7) Is a tubular handleset like the Kwikset Amador or Schlage F60 a substitute for the Emtek 3349?
No - those are a different door prep. The Kwikset 687AMD Amador single cylinder handleset and the Schlage F60 Addison keyed entry handleset with Accent lever are Grade 3 and Grade 2 respectively; the F60 fits doors 1-3/8 to 1-3/4 inch and the 687AMD lists 1-3/4 inch. The Emtek 3349 is a mortise lock requiring standard mortise door prep to ANSI A115.1 and a 2-1/2 inch or 2-3/4 inch backset, with handing specified left or right. A door bored for a tubular handleset has to be mortised before a 3349 will go in, and a door already mortised will not accept the tubular sets.
8) What handleset should I use on a door thicker than 1-3/4 inch?
The Emtek 3349 is built around a 1-3/4 inch standard door thickness, with thicker doors handled by specifying the thickness when ordering. If you would rather use a set whose published range already covers the thicker door, the Weslock 1411 Traditionale Colonial handleset with Eleganti knob is single cylinder and lists 1-3/4 to 2-1/4 inch, and the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob lists 1-3/8 to 2 inch. Both are tubular-style sets, so the door prep differs from the 3349 mortise prep.
9) Is there a graded handleset alternative if my facility spec calls out an ANSI grade?
Among the comparable handlesets, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset in the HDLB Series is Grade 2 entrance function, and the Schlage F60 Addison keyed entry handleset with Accent lever is Grade 2 entrance for 1-3/8 to 1-3/4 inch doors. The Kwikset 687AMD Amador and 687BW Belleview single cylinder handlesets are Grade 3 entrance sets at 1-3/4 inch. The Emtek 3349 is a residential mortise set carrying a UL 180 minute fire rating with ANSI F20 entrance or F13 dormitory function.
10) Is the Emtek 3349 handleset fire rated for a door between a garage and a house?
The mortise lock in the 3349 is UL Listed with a UL 180 minute rating, so it suits a fire rated opening where a 180 minute mortise lock is acceptable. Note the set is catalogued for residential use, so on a commercial fire door check what the door label calls for before you commit.
11) Does the Emtek 3349 entry set come with the latch and strike, or do I order those separately?
Complete set. The 3349 ships with the mortise lock body and the strike plate, plus the exterior full length brass plate and the interior trim you choose. The one thing you do choose is the inside knob or lever, which is a required selection, not an add-on part number you hunt down later.
12) Can I pick a different interior lever or knob on an Emtek 3349 and still match the rest of my house?
Yes, and this is the main reason to spec the 3349 over a fixed set. The inside trim can be any Emtek brass knob or lever, from Craftsman-appropriate options like the Arts and Crafts Lever, Hammered Lever and Spoke Knob through to crystal knobs such as Windsor and Georgetown. That lets the exterior read as one Arts and Crafts front door while the interior lever matches whatever is already on the other openings.
13) Should I use a mortise handleset like the Emtek 3349 or a tubular handleset with a separate deadbolt?
A mortise set puts the latch and the deadbolt in one lock case inside a pocket routed into the door edge, so there is a single throw and one prep. Tubular handlesets, like the Schlage Residential F60 Addison or the Kwikset 687AMD Amador, use two bored holes and a separate deadbolt above the handle. Mortise means more door prep up front and handing at the order, but it puts the whole lock in one case. If the door is already bored for a knob and deadbolt and you do not want to route a mortise pocket, a tubular set is the less invasive route.
14) What else does ZenSupply carry that is a true mortise entry set like the Emtek 3349?
The closest cross-brand mortise trim we carry is the Baldwin Estates 6542 Tremont, listed for 1-3/4 inch doors in both single cylinder (BAL-6542ENTR) and double cylinder (BAL-6542DBLC) entry versions. The 3349 is single cylinder only, so if the door has glass close to the lock and you want a keyed cylinder on both sides, the Baldwin double cylinder trim is the option to look at instead.
15) I have several units to do. Can Emtek 3349 handlesets be keyed alike across all of them?
Yes. Keyed alike is a selection made at order, alongside keyed different, and there is a field for keying to an existing key code if you are folding these into a master system already running on Schlage C. For a landlord or property manager doing a run of front doors, order them all keyed alike in the same finish and backset and they arrive matched, with no locksmith visit to rekey.
16) Do I need to specify handing on the alternatives the way I do on the Emtek 3349?
Handing is required on the Emtek 3349 - it is a mortise lock, ordered LH, RH, LHR or RHR for out-swing doors, and the direction has to be stated. The Baldwin Estates 6542 Tremont mortise trim, in single cylinder (6542ENTR) or double cylinder (6542DBLC), is the other mortise entrance option among the comparables and belongs to the same family of hardware where the lock body is set into the door edge. The tubular sets such as the Schlage F60 Addison and the Kwikset 687BW Belleview are entrance function bored sets, a different install pattern from the 3349 mortise prep.
17) I want a keypad or app-controlled entry instead of a keyed handleset - what takes the place of the Emtek 3349?
The Emtek 3349 is a mechanical, non-electronic keyed set on a Schlage C keyway. For an electronic opening, the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset is a standalone function and lists 1-3/4 to 2-1/4 inch door thickness, while the BYRD226CBARX is the Wi-Fi and Bluetooth version over the same range. The Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs a Halifax lever with a Contemporary SmartCode keypad electronic deadbolt at 1-3/4 inch. All three are deadbolt-and-handleset combinations rather than a mortise lock body.
18) What do I put on the inactive leaf of a pair of doors where the Emtek 3349 is on the active leaf?
The Emtek 3349 is a keyed entry set with a live mortise lock, so it is not the part for a non-latching leaf. The Weslock 6695 Belmont dummy handleset with Impresa knob is a dummy function over 1-3/8 to 2 inch, and the Weslock 2815 Hillcrest dummy handleset with New Heaven lever is dummy function over the same 1-3/8 to 2 inch range. If the leaf latches but does not need a key, the Schlage JE285 Barcelona style handleset with Seville lever is a non-keyed entry function, Grade 2, for 1-3/8 to 1-3/4 inch doors.
19) Which solid brass handlesets compare to the Emtek 3349 if I want the same material but a different style?
The Emtek 3349 is a brass handleset in an Arts and Crafts style, offered in Flat Black, Oil Rubbed Bronze, Satin Nickel and Unlacquered Brass. On the solid brass side, Deltana offers the 803871B Hanover entry handleset, the 815871 St. Ann entry handleset and the 825871 Kingston entry handleset, all entry function solid brass sets in their own series, plus the 810871 Montego handleset covering 1-3/8 to 2 inch doors. The Deltana sets are their own trim designs rather than a full length mortise entrance handleset.
20) My keying is on the Schlage C keyway - which alternatives keep that and which do not?
The Emtek 3349 ships on the Schlage C keyway, so it drops into a Schlage C master key system. The Kwikset 687AMD SMC Amador single cylinder handleset is built on the SC1 keyway with SmartKey, while the Kwikset 687AMD SMT and 687BW SMT Belleview sets are SmartKey entrance handlesets. If keeping one key across the building is the deciding factor, the keyway on each set is what to check before ordering.
21) What is the difference between the Emtek 3349 and an interconnected lockset like the Schlage JI18/19?
The Schlage JI18/19 interconnected passage lock with keyed deadbolt and Torino lever in satin stainless steel is a passage function set, Grade 2, for 1-3/8 to 1-3/4 inch doors - the lever passes and a separate deadbolt above it does the locking. The Emtek 3349 is a single cylinder keyed entry mortise handleset where latch and deadbolt live in one mortise body, ANSI F20 entrance or F13 dormitory function, and the set ships complete with latch and strike plate. They are not interchangeable in the door.
22) Which handleset alternatives come with the interior knob or lever already paired?
The Emtek 3349 is ordered with the inside trim chosen separately - any Emtek brass knob or lever - and sold as a complete set with latch and strike plate. Alternatives that arrive as a fixed pairing include the Baldwin Wesley handleset with Alcott knob (180WYHXATK) and the Baldwin Wesley handleset with Carnaby knob (180WYHXCYK), both entrance function, and the Weslock 1411 Traditionale Colonial with Eleganti knob, a single cylinder set for 1-3/4 to 2-1/4 inch doors. The Kwikset 687AMD and 687BW Amador and Belleview sets are exterior-only handlesets, so interior trim is a separate order.
23) Is there a simpler single cylinder handleset for a rental unit door instead of the Emtek 3349?
The Pamex FS7P31 Lexington single cylinder handleset in satin nickel is an entry function set for doors 1-3/8 to 1-3/4 inch, and the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob in the Premiere Essentials series covers 1-3/8 to 2 inch. Both are bored-door handlesets. The Emtek 3349 is a mortise set needing ANSI A115.1 mortise prep, handing specified, and a 5-1/2 inch center-to-center on the plate, so switching between them changes the door prep, not just the trim.
24) What finishes does the Emtek 3349 Craftsman handleset come in, and will Unlacquered Brass patina?
Four finishes: Flat Black (US19), Oil Rubbed Bronze (US10B), Satin Nickel (US15) and Unlacquered Brass (US3NL). US3NL has no clear coat over the solid brass, so it will darken and patina with handling and weather, which is the point of it on a Craftsman door. The other three hold their appearance. The set is solid brass throughout.
25) Is a key-free touchscreen deadbolt handleset an option where the Emtek 3349 would go?
The Yale Real Living BYRD256 CBARX Assure key free touchscreen deadbolt with Ridgefield passage handleset and trim is Wi-Fi function over 1-3/4 to 2-1/4 inch doors, and the BYRD256CBARX Assure Lock 2 key-free touchscreen deadbolt with Wi-Fi and Ridgefield handleset covers 1-3/8 to 2-1/4 inch. Both pair a passage-style handleset with an electronic deadbolt and no cylinder. The Emtek 3349 is keyed on a Schlage C keyway with the locking in a single mortise body, so the door prep and the way the opening is secured are different.
How fast can I get the Emtek F20-3349-75-RH-US19 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek F20-3349-75-RH-US19 come with a warranty?
Absolutely. The Emtek F20-3349-75-RH-US19 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek F20-3349-75-RH-US19?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek F20-3349-75-RH-US19 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.