Emtek 3047 Mormont Mortise Ent...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$718.00
$574.40
Emtek 3047 Mormont Mortise Entrance Handleset, Brass - Dummy

Emtek 3047 Mormont Mortise Entrance Handleset, Brass - Dummy

(No reviews yet) Write a Review

Model: 3047-RH-US26
From the Brass Collection
$718.00
$574.40
Selected Handing is
Selected Finish is
Selected Knob or Lever Style for Inside Trim is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$718.00
$574.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 3047 Mormont Mortise Entrance Handleset - Dummy

  • Can be ordered with any Brass Knob or Lever for the inside trim
  • Sold as complete set
  • Handing required for All Mortise Locks

This Mortise Lock Handleset is available in 3 Functions:

Single Cylinder Mortise Sideplates are locked/unlocked with a key from the exterior and locked/unlocked from the inside of the home with a thumbturn.

  • The F20 Function Mortise box has buttons on the edge of the door that allow you to set the box to lock behind you as you leave the home, or another button to keep the door unlocked. This button setting is reset each time the door is locked.
  • The F13 Function Mortise Box does not have the buttons on the edge of the box. This set will only lock when activated with a key outside or thumbturn inside.

Dummy: If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two sideplate locks. For the active side, you'll need a single cylinder sideplate. For the inactive door, you'll want to order a dummy sideplate. This gives you the look of a complete working set, but doesn't have all of the mechanisms - perfect for an inactive door.


Warranty

Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Returns

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a restocking fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.

 

Specifications:

  • Backset: 2-1/2" or 2-3/4"
  • Door Prep: Standard Mortise ANSI A115.1
  • UL Function: ANSI F20 or F13
  • Door Thickness: 1-3/4" standard (specify if thicker)
  • Keyway: Schlage C
  • Handing: Required – specify left or right
  • Fire Rating: UL 180 minute

Product Specs

Subcategory:
Mortise Entry Sets
Collection:
Brass
Product Type:
Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Mortise Locks and Trim
Commercial/Residential:
Residential
Keyed Function:
Non-Keyed
Lock Type:
Mortise
Keyed:
No
Lock Function:
Dummy
Series:
Mormont
Theme:
Contemporary
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
3047
Product Function:
Dummy
Product Style:
Contemporary
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 3047-RH-US26 – Frequently Asked Questions

1) What is a dummy mortise handleset like the Emtek 3047 Mormont used for?
A dummy sideplate is for the inactive leaf of a double front door. It gives you the same Mormont handleset appearance as the active leaf but carries no working lock mechanism, no cylinder and no latch. On a pair of doors you order two sideplates: a single cylinder set for the active leaf and this dummy for the inactive one. If you only have one door, a dummy is the wrong part, you want the keyed single cylinder version.
2) Do I have to specify handing on the Emtek 3047 Mormont dummy handleset?
Handing is required, and it is ordered as left hand or right hand in-swing. Emtek requires handing on all of its mortise sets, so on a double door you hand each leaf separately, the inactive leaf takes whichever hand suits its swing side. Get it wrong and the sideplate thumbpiece sits on the wrong edge of the door.
3) My door is already prepped for a mortise lock. Will the Emtek 3047 Mormont drop into it?
The Mormont uses standard mortise prep to ANSI A115.1, so a door already cut to that standard pocket takes it. What you need to confirm on your existing prep is the backset, since the set is built for 2-1/2 or 2-3/4 inches, and the cross bore spacing for the sideplate. A door prepped for a bored (cylindrical) lock will not take this, that is a different cutout entirely.
4) The door is 1-3/8 inch thick - what handleset should I use instead of the Emtek 3047 Mormont?
The Emtek 3047 Mormont is built around a 1-3/4 inch door as standard, with thicker doors specified at the time of order. For a 1-3/8 inch leaf, the Pamex FS7P31 Lexington single cylinder handleset covers 1-3/8 inch to 1-3/4 inch, and the Schlage Residential F60 Addison keyed entry handleset with Accent lever covers the same 1-3/8 inch to 1-3/4 inch range as a Grade 2 F Series set. On the dummy side, the Weslock 2815 Hillcrest dummy handleset covers 1-3/8 inch to 2 inch.
5) What do I order for the active leaf if the Emtek 3047 Mormont dummy is going on the inactive door?
The Mormont dummy is built for exactly that pairing: on a double front door the inactive leaf takes a dummy sideplate and the active leaf takes a single cylinder mortise sideplate, which is keyed from outside and operated by a thumbturn inside. If the active leaf is being handled with a separate brand, the Baldwin Estates 6542 Tremont single cylinder entry mortise trim is a mortise entry trim for 1-3/4 inch doors, and Baldwin also lists the 6542 Tremont in a double cylinder version for openings that require a key on both sides.
6) What is the closest equivalent to the Emtek 3047 Mormont dummy handleset from another brand?
The Weslock 2815 Hillcrest dummy handleset with New Heaven lever is the nearest peer in function - it is also a dummy handleset, so it mounts as a non-operating trim set on an inactive door leaf. Weslock lists it for doors 1-3/8 inch to 2 inch thick. The Emtek 3047 Mormont is a dummy mortise handleset in brass, with the inside trim ordered as any Emtek brass knob or lever. The difference to weigh is the door prep: the Mormont dummy carries mortise sideplate styling to match a working mortise set on the active leaf, while the Weslock 2815 is a bored-door style handleset.
7) The door is 2 inches thick - which handlesets are rated for it?
The Weslock 1411 Traditionale Colonial handleset with Eleganti knob is listed for 1-3/4 inch to 2-1/4 inch doors in a single cylinder function, and the Yale Real Living BYRD226NRRX Assure Lock touchscreen deadbolt with Ridgefield handleset covers the same 1-3/4 inch to 2-1/4 inch range. The Emtek 3047 Mormont is specified around a 1-3/4 inch door with thicker doors called out on the order, and Emtek publishes a dimensions and door thickness technical sheet for the Mormont mortise handlesets to confirm before ordering.
8) Is a bored-door entry handleset a drop-in substitute for the Emtek 3047 Mormont?
No - the door prep is different. The 3047 Mormont takes a standard mortise pocket to ANSI A115.1 and requires handing to be specified left or right. Handlesets such as the Kwikset 687AMD Amador single cylinder keyed entry, the Kwikset 687BW Belleview, and the Schlage Residential F60 Addison with Accent lever are bored-door entrance sets, the Kwiksets Grade 3 and the Schlage Grade 2. Swapping between them means changing the door prep, not just the trim.
9) What is the difference between the Emtek 3047 Mormont dummy and a non-keyed entry handleset like the Schlage JE285?
The Schlage Residential JE285 Barcelona style handleset with Seville lever is a non-keyed entry function Grade 2 set in the J Series for 1-3/8 inch to 1-3/4 inch doors - it has no cylinder but the latch still retracts, so the door latches and opens. The Emtek 3047 Mormont in dummy function has no operating mechanism at all; it is fixed trim that gives the look of a working set on a leaf that stays closed. If the door needs to open and close routinely without a key, the JE285 is the operating choice; if it is the inactive leaf of a pair, the Mormont dummy is.
10) Do I have to pick an interior knob or lever with the Emtek Mormont handleset?
Yes, the inside trim is a required selection and it is not preassigned. You choose from Emtek's brass knob and lever range, which runs from contemporary bars and knurled designs (T-Bar, R-Bar, L-Square, Conical, Spoke, Ace) through traditional levers and knobs (Cortina, Milano, Turino, Rope, Ribbon and Reed, Providence, Waverly) to crystal options like Bristol, Windsor and Georgetown. The set ships complete once that choice is made.
11) What finishes does the Emtek 3047 Mormont handleset come in?
Six finishes on the Mormont sideplate: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL) and Satin Brass (US4). All six are offered in both left and right hand. If you are matching an inactive leaf to an active one, order both sideplates in the same finish code, and note that Unlacquered Brass is a living finish that will patina over time.
12) What is the difference between the F20 and F13 mortise functions on an Emtek Mormont set?
That choice applies to the working sideplate you pair with a dummy, not to the dummy itself. The F20 mortise box has buttons on the door edge that let you set it to lock behind you as you leave or hold it unlocked, and the setting resets each time the door is locked. The F13 box has no edge buttons, it locks only by key from outside or thumbturn inside. Pick F20 if you want the door to self lock on closing, F13 if you want deliberate locking only.
13) What else could I use for a dummy handleset on the inactive door if the Emtek Mormont is not right?
Two other dummy handlesets we carry: the Weslock 2815 Hillcrest with the New Heaven lever and the Weslock 6695 Belmont with the Impresa knob, both rated for 1-3/8 to 2 inch doors. Those cover a wider thickness range than the Mormont's 1-3/4 inch standard, which matters on an older door. The trade-off is styling, the Mormont is a contemporary mortise sideplate and the Weslock sets are traditional handlesets, so match whichever one looks like the active leaf you are pairing it with.
14) I need a dummy handleset with a knob instead of a lever for the inactive leaf - what are my options?
The Weslock 6695 Belmont dummy handleset comes with an Impresa knob as the interior trim and fits doors 1-3/8 inch to 2 inch thick. The Emtek 3047 Mormont dummy also takes knob trim - the inside trim is ordered separately from the Emtek brass knob and lever range, which includes knobs such as the Ace, Spoke, Round, Octagon and crystal knobs alongside the lever options.
15) I want a keypad or smart lock on the front door instead of a keyed mortise handleset - what pairs with a handleset?
Several handleset-plus-electronic combinations exist. The Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs Halifax lever interior trim with a contemporary SmartCode keypad electronic deadbolt with SmartKey, on a 1-3/4 inch door in the Signature Series. Yale Real Living offers the BYRD226CBARX Assure Lock Wi-Fi and Bluetooth touchscreen deadbolt with Ridgefield handleset and the BYRD226NRRX standalone touchscreen version, both for 1-3/4 inch to 2-1/4 inch doors. The Emtek 3047 Mormont is a non-electronic mortise handleset, so an electronic option means changing the door prep from the mortise pocket to a bored deadbolt and latch.
16) Which solid brass handlesets compare to the Emtek 3047 Mormont?
Deltana offers several solid brass entry handlesets: the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston, all listed as solid brass entry function, plus the 810871 Montego for doors 1-3/8 inch to 2 inch. The Emtek 3047 Mormont is a brass mortise handleset in a contemporary style, offered in oil rubbed bronze, satin nickel, flat black, polished chrome, unlacquered brass and satin brass. The Deltana sets are entry function; the Mormont 3047 is the dummy function of its family.
17) I need an ANSI grade stated for a spec submittal - which handlesets carry one?
Among the comparable handlesets, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset in the HDLB Series is Grade 2, the Schlage Residential F60 Addison with Accent lever is Grade 2 in the F Series, the Schlage JE285 Barcelona and the JI18/19 interconnected set are Grade 2, and the Kwikset 687AMD Amador and 687BW Belleview are Grade 3. The Emtek 3047 Mormont is a residential mortise set with a UL 180 minute fire rating and standard mortise prep to ANSI A115.1.
18) Can I use a Kwikset SmartKey handleset to match keying with the Emtek 3047 Mormont?
No. The Emtek Mormont mortise handlesets use a Schlage C keyway. The Kwikset 687AMD Amador is offered as an SMT SmartKey version and as an SMC version with an SC1 keyway, and the Kwikset 687BW Belleview is a SmartKey set. Only the SC1 variant shares the Schlage keyway family, and the 3047 Mormont itself is the dummy function with no cylinder, so keying applies to the active leaf set rather than to this one.
19) What should I use if I need the handleset and a separate deadbolt to work together on one door?
The Schlage Residential JI18/19 interconnected passage lock pairs a passage function latch with a keyed deadbolt and a Torino lever, Grade 2 in the JI Series for 1-3/8 inch to 1-3/4 inch doors, so one motion retracts both. The Master Lock HDLBA0615/4D is a Grade 2 single cylinder deadbolt handleset in the HDLB Series. The Emtek Mormont handlesets take a different approach - the mortise box itself carries both latch and deadbolt in a single pocket, with the F20 function offering edge buttons that set the door to lock behind you and the F13 function locking only by key or thumbturn.
20) Which handlesets ship with the interior knob or lever included rather than ordered separately?
The Baldwin 180WYH Wesley handleset is offered as a set with the Alcott knob and as a set with the Carnaby knob, both entrance function, and the Weslock 6695 Belmont dummy comes with the Impresa knob. With the Emtek 3047 Mormont the inside trim is a required selection made at the time of order from the Emtek brass knob and lever range, and the result is sold as a complete set.
How fast can I get the Emtek 3047-RH-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 3047-RH-US26 come with a warranty?
Absolutely. The Emtek 3047-RH-US26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 3047-RH-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 3047-RH-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!