Emtek 3044 Artemis Brass Mortise Entrance Handleset - Dummy

Dummy function, so there is no latch and no cylinder. The 3044 Artemis is a fixed surface-mounted trim set used on a door leaf that does not latch: the inactive half of a double door, a closet or pantry door with a ball catch or roller catch, or a French door slab that is held by another device. If you need the opening to actually latch and lock, order the keyed or entrance mortise version of the handleset instead.

Yes, handing is required on all Emtek mortise sets, and the 3044 Artemis is stocked left hand and right hand as separate orderable items. Stand outside the door: if the hinges are on your left it is a left hand door. Get this wrong and the thumbpiece and lever sit backwards on the leaf.

Standard mortise prep to ANSI A115.1, with a 2-1/2 inch or 2-3/4 inch backset. That is the same pocket a conventional mortise lock body drops into, so if the door was already prepped for a mortise lock the trim lines up. A door bored for a cylindrical lock (a 2-1/8 inch cross bore) will not take this without a new mortise pocket cut.

Inside trim is a required choice, and Emtek opens the whole brass knob and lever range to it, from contemporary bars and knurled styles (T-Bar Knurled, L-Square Faceted, Spoke Knob) through traditional levers (Milano, Turino, Rope) and crystal knobs (Windsor, Bristol, Georgetown). The set ships complete with the exterior handle and the inside trim you pick, so you are not sourcing the interior half separately.

Several. The Baldwin Estates 6542 Tremont mortise trim comes single cylinder or double cylinder and is specified for 1-3/4 inch doors, which is the closest match if you want to keep mortise prep. For cylindrical prep instead, the Schlage Residential F60 Addison with Accent lever is Grade 2 entry and covers 1-3/8 to 1-3/4 inch, and the Kwikset 687 Amador and 687 Belleview handlesets are Grade 3 keyed entry at 1-3/4 inch. Going from mortise to cylindrical means a different door prep, so the Baldwin is the swap that keeps the pocket you already have.

The Emtek 3044 Artemis is built around 1-3/4 inch doors as standard, with thicker doors specified at time of order. For a 1-3/8 inch door, the Deltana 810871 Montego Handleset covers 1-3/8 inch to 2 inch, the Pamex FS7P31 Lexington Single Cylinder Handleset covers 1-3/8 inch to 1-3/4 inch, and the Schlage JE285 Barcelona Style Handleset with Seville Lever covers 1-3/8 inch to 1-3/4 inch in a non-keyed entry function.

The Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever is also a dummy-function handleset, and it fits doors 1-3/8 inch to 2 inch thick. The Weslock 6695 Belmont Dummy Handleset with Impresa Knob is another dummy handleset, with the same 1-3/8 inch to 2 inch door thickness range. The Emtek 3044 Artemis is a brass mortise handleset built to standard mortise ANSI A115.1 door prep with a 2-1/2 inch or 2-3/4 inch backset, so the door must already be mortised; the Weslock dummies are surface-applied trim and do not require a mortise pocket.

The Emtek 3044 Artemis is non-keyed dummy trim, so it does not latch or lock. For the active leaf, keyed handlesets in the same residential handleset category include the Schlage F60 Addison Single Cylinder Keyed Entry Handleset with Accent Lever, a Grade 2 entrance handleset for doors 1-3/8 inch to 1-3/4 inch thick, and the Weslock 1411 Traditionale Colonial Handleset with Eleganti Knob, a single cylinder set for doors 1-3/4 inch to 2-1/4 inch. Those are bored-door handlesets; the 3044 uses standard mortise ANSI A115.1 prep, so pairing across a set of double doors means the two leaves are prepped differently.

Both are mortise-prepped brass trim. The Baldwin Estates 6542 Tremont comes in a single cylinder entry version and a double cylinder entry version, both entrance function for 1-3/4 inch doors. The Emtek 3044 Artemis is dummy function and non-keyed - it takes no cylinder at all and is fixed trim rather than an operating entry set. If the opening needs to lock, the Tremont pair is the entrance-function option; if the leaf is inactive, the 3044 is the dummy.

The Emtek brass mortise entrance handlesets carry a UL 180 minute fire rating. Note that a dummy set has no latching mechanism of its own, so on a rated opening the leaf still has to be positively latched by whatever else is on it. Confirm the full assembly matches the door label.

Six: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL) and Satin Brass (US4). Each is stocked in both left and right hand. Unlacquered brass is the one to watch on a fleet of doors, it is meant to patina with handling rather than hold its as-shipped color, so it will not stay matched to a lacquered set installed years earlier.

Yes, it is built on the same Artemis brass mortise entrance handleset platform and takes the same finishes and the same inside knob and lever catalog, so a dummy leaf reads identically to the working leaves beside it. That is the normal way to do a pair of French doors or a double entry: keyed set on the active leaf, this dummy on the inactive one.

Two we carry: the Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever and the Weslock 6695 Belmont Dummy Handleset with Impresa Knob, both dummy function and both rated for 1-3/8 to 2 inch doors, so they cover thinner interior slabs that the Emtek 1-3/4 inch standard does not. The tradeoff is style range: the Weslocks come as a fixed handle and trim pairing, where the Emtek lets you specify the interior knob or lever from the full brass line.

Emtek classes the brass Artemis handleset as residential. For a multi-family common area, an office suite door, or anything taking commercial traffic, look at a Grade 2 or Grade 1 rated set instead, such as the Grade 2 Schlage Residential F Series or the Master Lock HDLB Series Grade 2 handleset. Inside a unit or on a single family entry the Artemis is in its intended application.

Emtek brass mortise entrance handlesets run the Schlage C keyway, so cylinders will accept Schlage C blanks and can be keyed into a Schlage C system on the same key. Worth knowing when you are speccing the 3044 dummy on one leaf and keyed sets on the rest of the house, since the dummy itself is non-keyed and carries no cylinder.

The Deltana 803871B Hanover, 815871 St. Ann, and 825871 Kingston are all solid brass handlesets in entry function. The Emtek 3044 Artemis is brass as well but dummy function, so it is fixed trim with no latch action. Matching brass on adjacent doors works; swapping one for the other on the same opening changes whether the door operates.

The Emtek 3044 Artemis is non-electronic. For an electronic opening, the Yale Assure Lock BYRD226NRRX Standalone Touchscreen Deadbolt with Ridgefield Handleset and the BYRD226CBARX Wi-Fi and Bluetooth version both fit 1-3/4 inch to 2-1/4 inch doors, and the Kwikset 815SCEHFL-CP913CNT San Clemente Handleset with Halifax lever pairs a Contemporary SmartCode keypad deadbolt for 1-3/4 inch doors. These are deadbolt-and-handleset combinations rather than mortise trim, so the door is bored, not mortised.

Yes - the Emtek 3044 Artemis is ordered left hand or right hand, since handing is required on all mortise locks, and it ships in that pair of handings across finishes including Oil Rubbed Bronze US10B, Satin Nickel US15, Flat Black US19, Polished Chrome US26, Unlacquered Brass US3NL, and Satin Brass US4. The Weslock 2815 Hillcrest and Weslock 6695 Belmont are the dummy-function alternatives if a non-handed approach suits the opening better.

Among comparable handlesets, the Schlage F60 Addison with Accent Lever and the Schlage JE285 Barcelona with Seville Lever are Grade 2, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is Grade 2, and the Kwikset 687AMD Amador and 687BW Belleview exterior-only handlesets are Grade 3. The Emtek 3044 Artemis is a residential brass mortise set carrying a UL 180 minute fire rating and standard mortise ANSI A115.1 door prep.

No. The Kwikset 687AMD Amador SmartKey and 687AMD SMC with SC1 keyway are single cylinder keyed entry handlesets supplied as exterior trim only, meaning the keyed exterior half without interior trim, for 1-3/4 inch doors. The Emtek 3044 Artemis is sold as a complete set with both exterior handleset and an inside knob or lever selected from the brass trim options, and it is dummy function rather than keyed.

The Baldwin Wesley Handleset is offered paired with an Alcott knob and with a Carnaby knob, both entrance function. The Emtek 3044 Artemis is ordered with the inside knob or lever chosen separately from the brass trim range, which includes options such as the Ace Knob, Spoke Knob, Athena Lever, and Stuttgart Lever, and it is dummy function while the Wesley pairings are entrance.

They solve different openings. The Schlage JI18/19 with Torino Lever is a Grade 2 interconnected passage lock with a keyed deadbolt for 1-3/8 inch to 1-3/4 inch doors, where one motion retracts latch and bolt together. The Emtek 3044 Artemis is dummy trim on a mortise-prepped door with no latch or bolt at all, ordered left or right hand.