Emtek 3534 Hailey Mortise Entr...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,121.00
$896.80
Emtek 3534 Hailey Mortise Entrance Lockset - Entry Set

Emtek 3534 Hailey Mortise Entrance Lockset - Entry Set

(No reviews yet) Write a Review

Model: F20-3534-75-RH-FB
From the Brass Collection
$1,121.00
$896.80
Selected Function is
Selected Backset is
Selected Handing is
Selected Finish is
Selected Knob or Lever Style for Inside Trim is
Selected FREE KEYING Options is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,121.00
$896.80
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 3534 Hailey Mortise Entrance Lockset - Entry Set

- Can be ordered with any Sandcast Bronze Knob, Crystal and Porcelain or Lever
- Sold as complete set. Includes Latch and Strike Plate

- 2-1/2" or 2-3/4" Backsets
- Standard Mortise Door Prep ANSI A115.1
- UL Listed Mortise with ANSI F20 or F13 Function
- Schlage C Keyway
- Handing required for All Mortise Locks

Product Codes:

Entryset: 3534
Dummy: 3134


 

Specifications:

  • Backset: 2-1/2" or 2-3/4"
  • Door Prep: Standard Mortise ANSI A115.1
  • UL Function: ANSI F20 or F13
  • Door Thickness: 1-3/4" standard (specify if thicker)
  • Keyway: Schlage C
  • Handing: Required – specify left or right
  • Fire Rating: UL 180 minute

Product Specs

Subcategory:
Mortise Entry Sets
Collection:
Brass
Product Type:
Mortise Locks
Product Group:
Mechanical Locks
Product Subgroup:
Mortise Locks and Trim
Commercial/Residential:
Residential
Lock Type:
Mortise
Lock Function:
Entry
Series:
Hailey
Theme:
American Classic
Electronic:
No
Keyed:
Yes
Keyed Function:
Single Cylinder
MAP Policy:
Yes
Product Model:
3534
Product Function:
Entry
Product Style:
American Classic
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek F20-3534-75-RH-FB – Frequently Asked Questions

1) Do I have to specify handing when ordering the Emtek 3534 Hailey mortise entry set?
Handing is required on every Emtek mortise lock, including the 3534 Hailey. You pick one of four: left hand in-swing, left hand out-swing, right hand in-swing, or right hand out-swing. Stand outside the door, note which side the hinges are on and which way the door swings, and order to match. Get it wrong and the lever or knob will not orient correctly.
2) Which backset does the Emtek 3534 Hailey entry set use, and how do I know which one my door needs?
Two backsets are offered, 2-1/2 inch and 2-3/4 inch. Backset is the distance from the door edge to the center of the knob or lever spindle. If you are replacing an existing mortise lock, measure that distance on the door you have and order to match, since the mortise pocket is already cut. On new doors, the pocket is cut to whichever backset you specify.
3) Will the Emtek 3534 mortise entry set fit a door thicker than 1-3/4 inches?
Standard build is for a 1-3/4 inch door, which is the usual thickness for an exterior entry door. Thicker doors are handled, but you have to call out the actual thickness when you order so the spindles and screw lengths come correct. There is a door thickness field on the order for exactly that.
4) What is the difference between the F20 and F13 function on the Emtek Hailey mortise lock?
Both are UL listed mortise functions and you choose one when ordering. F20 is the entrance function, the normal choice for a house front door or an apartment entry where the inside lever always retracts the latch and the outside can be locked. F13 is the dormitory function, used where the outside trim stays locked and is released by key. Pick F20 for a typical residence; F13 suits multi-family and rental entries where you want the door locked by default.
5) Does the Emtek 3534 need a special door prep or will it drop into an existing mortise pocket?
The 3534 Hailey uses standard mortise door prep per ANSI A115.1. If the door already carries an A115.1 mortise pocket at a matching 2-1/2 inch or 2-3/4 inch backset, the lock body drops in. Face plate and trim cutouts still need to line up, so check the existing escutcheon footprint before you pull the old lock.
6) Can I key the Emtek Hailey entry set to my existing Schlage keys?
The 3534 Hailey ships with a Schlage C keyway, so it takes standard SC1 style keys and can be keyed to an existing Schlage C system. You choose keyed different or keyed alike, and if you have a key code on file for the building, you can supply it and have the locks cut to that code. It is a single cylinder setup, key outside and thumbturn or lever inside.
7) Is the Emtek 3534 Hailey suitable for a commercial building entrance?
It is classified residential. For a decorative front door on a house, a custom home, or an upscale multi-family unit entry it is the right kind of product. For a commercial opening where you need an ANSI/BHMA Grade 1 lock, look at a heavy duty mortise lockset instead, such as the Corbin Russwin ML2003 Grade 1 or the Cal-Royal NM8050 Grade 1 entrance/office mortise lockset, both listed for 1-3/4 inch doors.
8) What is the closest equivalent to the Emtek 3534 Hailey mortise entrance lockset from another decorative brand?
The nearest decorative-residential match is the Baldwin 6301, an entry/apartment mortise lock body offered knob by knob with a 2-1/2 inch backset and a door thickness range of 1-3/4 inch and over, with a lever by lever version sold as the 6301LS. The Emtek 3534 Hailey is an entry-function mortise set in brass, ordered with a 2-1/2 inch or 2-3/4 inch backset and supplied as a complete set with latch and strike plate, so the Baldwin covers the same residential entry role while the Emtek adds the wider backset choice and finished trim in the same order.
9) I need a mortise entry lock for a commercial storeroom door instead of a residence - what should I use?
The Emtek 3534 Hailey is catalogued as residential entry hardware, so for a storeroom opening in a commercial building look at the Accentra 8805FL, a Grade 1 storeroom mortise lock from the 8800 Series with an Arcadia lever, or the Cal-Royal NM8080, a heavy duty Grade 1 storeroom mortise lockset with an interchangeable core option for 1-3/4 inch doors. Both are storeroom function, meaning the outside lever stays locked and is retracted by key, which the entry-function Emtek does not do.
10) My door is thinner than 1-3/4 inch - is the Emtek 3534 Hailey still the right lock?
The Emtek 3534 Hailey is built for 1-3/4 inch doors as standard, with thicker doors accommodated when the thickness is specified at order. For a thinner door, the Baldwin 6310 entry/storeroom mortise lock body covers 1-3/8 inch and over with a 2-1/2 inch backset, and for 1 inch ornamental iron stiles the Marks USA 21AC and 22AC are double cylinder entrance mortise locks with a round knob.
11) Can the Emtek 3534 Hailey go on a fire rated door?
The mortise lock body is UL listed with a 180 minute fire rating, so it is acceptable on a fire rated opening up to that duration. The full assembly still has to match what the door and frame are labeled for, and the door must be equipped for self-closing and latching.
12) What comes in the box with the Emtek 3534 Hailey entry set?
It is sold as a complete set: the Hailey exterior trim, the mortise lock body, the latch and the strike plate, plus the inside knob or lever you select. You choose the inside trim from 25 styles, ten levers including Aurora, Durango and Teton, and knobs such as Winchester, Windsor, Georgetown and Modern Square. No separate lock body or cylinder purchase is needed.
13) I need a matching non-locking set for a closet or a French door pair. What do I order alongside the Emtek 3534?
Emtek makes the dummy version of the same Hailey trim as model 3134. It uses the identical plate and your choice of knob or lever, with no working lock, which is what you want on an inactive leaf of a pair or a pantry door that only needs a pull.
14) The Emtek 3534 requires handing - is there a mortise lock that does not?
Yes. Handing must be specified left or right on the Emtek 3534 Hailey, and it is offered in left hand and right hand versions for both in-swing and out-swing doors. If you would rather not commit at the time of order, the BEST 45H heavy duty mortise lock body in public entrance function is field reversible, the Falcon MA101 Grade 1 heavy duty passage mortise lock is field reversible as well, and the Kaba Ilco 185 Series mortise deadbolt is sold with no handing. Those are commercial-style bodies rather than decorative entry sets.
15) Is there a keyless or electronic alternative to the Emtek 3534 mortise entrance set?
The Emtek 3534 Hailey is a mechanical, single cylinder keyed set on a Schlage C keyway, not electronic. For keyless entry on a mortise prep, options include the Dormakaba E-Plex 2066 Series electronic pushbutton keyless mortise lock, the BEST 45HZ EZ Series electronic keypad mortise lock with key override, and the Accentra NTM623-NR Grade 1 nexTouch Generation 3 mortise lock with a capacitive touchscreen keypad and cylinder override. Those trade the decorative brass knob and lever styles for credential-based access.
16) What is a simpler non-keyed mortise option if I do not need the Emtek 3534 to lock?
The Emtek 3534 Hailey is a keyed single cylinder entry set. For an opening that only needs latching, the Schlage PM010 is a Grade 1 non-keyed passage latch mortise lock for 1-3/4 inch doors, the Hager 3810S is a Grade 1 passage mortise lock with rose and a 2-3/4 inch backset covering 1-3/4 inch to 2-1/2 inch doors, and the Hager 3810E is the same passage function with an escutcheon. For a bed or bath door, the Hager 3840S is a Grade 1 privacy mortise lock with a 2-3/4 inch backset.
17) Can I use a Sargent 4874 or Kaba Ilco 185 in place of the Emtek 3534 Hailey?
No - those are deadbolts, not entry sets. The Sargent 4874 is a double cylinder mortise deadbolt with a 2-3/4 inch backset in the 4870 Series, and the Kaba Ilco 185 Series is a mortise deadbolt, so neither includes an operating knob or lever to retract a latch. The Emtek 3534 Hailey is a complete entrance set including latch and strike plate, ordered with your choice of inside knob or lever trim. If you want a deadbolt alongside it rather than instead of it, those are the right parts.
18) Does anything else offer a dormitory function like the Emtek 3534 F13?
Yes. The Emtek 3534 Hailey can be ordered in F13 dormitory function alongside F20 entrance. On the commercial side, the Sargent 7925 is a Grade 1 heavy duty corridor/dormitory exit function mortise lock in the 7900 Series with rose trim and a single cylinder deadbolt. The Sargent is a rose-trim commercial lock, while the Emtek is a brass entry set ordered with a decorative knob or lever for the inside.
19) What should I order for the inactive or non-functioning door in a pair if I am using the Emtek 3534?
For a matching non-operating opening, the Emtek dummy version of the Hailey is product code 3134, which keeps the same trim family as the 3534 entrance set. Among commercial alternatives, the Schlage L0170 is a Grade 1 non-keyed half dummy mortise lever trim in the L Series for 1-3/4 inch doors, and the Falcon MESC600DT is a dummy escutcheon lever trim for M9900 Series exit devices - neither matches Emtek brass trim, so use the 3134 if appearance needs to match.
20) What finishes does the Emtek Hailey mortise entrance set come in?
Three sandcast bronze finishes: Flat Black Bronze, Medium Bronze, and Tumbled White Bronze. These are living finishes on solid brass substrate, so they shift in tone with handling and weather rather than staying uniform like a plated finish.
21) Can I mix a knob on the inside with the Hailey handle on the outside?
Yes, the inside trim is chosen separately from the exterior. You can pair the Hailey exterior with any of the sandcast bronze knobs like Butte, Egg, Round or Bristol, a crystal or porcelain knob, or a lever such as Cimarron, Mariposa or Montrose. Common practice is a lever inside for easier operation with full hands and the sculpted handle outside.
How fast can I get the Emtek F20-3534-75-RH-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek F20-3534-75-RH-FB come with a warranty?
Absolutely. The Emtek F20-3534-75-RH-FB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek F20-3534-75-RH-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek F20-3534-75-RH-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!