Emtek 4211 Wilshire Single Cyl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$583.00
$466.40
Emtek Emtek 4211 Wilshire Single Cylinder Entrance Handleset - Brass Tubular EMTEK-4211

Emtek 4211 Wilshire Single Cylinder Entrance Handleset - Brass Tubular

(No reviews yet) Write a Review

Model: 4211-US15
From the Brass Collection
$583.00
$466.40
Selected Finish is
Selected Knob or Lever Style for Inside Trim is
Selected Handing is
Selected Backset is
Selected FREE KEYING Options is
  • Emtek Emtek 443 Interconnect Device EMTEK-443

In Stock (leaves warehouse same day if ordered before 3pm ET)

$583.00
$466.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 4211 Wilshire Single Cylinder Entrance Handleset - Brass Tubular

  • Can be ordered with any Brass Knob or Lever for the inside trim
  • Sold as a complete set. Includes Latch and Strike Plate
  • Standard 2-1/8" Door Prep. Door Prep 5-1/2" Center-to-Center
  • Schlage C Keyway
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
  • Handing required if Lever used on inside or if Interconnect device is specified

Weiser® (WR5) Keyway

Specify by adding "W" to the beginning of Product Code for Weiser (WR5) Keyway.
No upcharge for cylinder substitution. Can be keyed into existing Weiser system.

 

 

Specifications:

  • Backset: 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 2"
  • Keyway: Schlage C
  • Handing: Required – specify left or right

Product Specs

Subcategory:
Handlesets
Collection:
Brass
Product Type:
Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Keyed Function:
Single Cylinder
Commercial/Residential:
Residential
Lock Type:
Tubular
Keyed:
Yes
Lock Function:
Entry
Series:
Wilshire
Theme:
American Classic
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
4211
(CTC) Center-to-Center:
5-1/2"
Product Function:
Entry
Product Style:
American Classic
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 4211-US15 – Frequently Asked Questions

1) Will the Emtek 4211 Wilshire handleset fit my door, and what prep does it need?
The Wilshire 4211 handleset fits doors from 1-3/8 inch up to 2 inch thick. It uses standard prep: a 2-1/8 inch cross bore and 5-1/2 inch center-to-center between the handle bore and the deadbolt bore. If your existing handleset already sits on a 5-1/2 inch CTC layout with a 2-1/8 inch bore, this drops into the same holes. Backset is your choice of 2-3/8 or 2-3/4 inch, so it works on both common bore locations.
2) Do I have to specify handing when ordering the Emtek 4211 Wilshire handleset?
Handing is required on the 4211 Wilshire, left or right. It matters most if you pick a lever for the inside trim or add the interconnect device, since those are directional. Determine handing from outside the door: if the hinges are on your right and the door swings away from you, it is right hand. Get this wrong with a lever inside and the lever points the wrong way.
3) Can I key the Emtek 4211 into my existing Schlage or Weiser keys?
Both are covered. The Wilshire 4211 ships standard with a Schlage C keyway, and a Weiser WR5 cylinder is available instead at no upcharge, which lets it key into an existing Weiser system. Keyed alike and keyed different are both offered, and you can supply a key code to have it cut to an existing system.
4) Does the Emtek 4211 Wilshire come with a deadbolt and latch, or do I buy those separately?
It is sold as a complete set, latch and strike plate included. Standard latch is 2-3/8 inch backset; specify 2-3/4 inch if that is what your door is bored for. What you do have to choose is the inside trim, a knob or lever, which is a required selection rather than an add-on part number you chase separately.
5) What is the closest alternative to the Emtek 4211 Wilshire handleset for a door thicker than 2 inches?
The Emtek 4211 Wilshire entrance handleset covers doors from 1-3/8 inch to 2 inch thick. For a thicker slab, the Weslock 1411 Traditionale Colonial handleset with Eleganti knob covers 1-3/4 inch to 2-1/4 inch and is a single cylinder keyed entry function, so it stays in the same keyed-entry role while reaching the heavier door. Confirm the slab measurement at the lock stile before ordering, since handleset spindles and through-bolts are cut for a stated range.
6) Is there a single cylinder brass entry handleset like the Emtek Wilshire in a different style family?
Yes. The Deltana 803871B Hanover, Deltana 815871 St. Ann, and Deltana 825871 Kingston are all solid brass handlesets in an entry function, matching the Emtek 4211 Wilshire on material and function while giving three different escutcheon styles. The Emtek 4211 is a brass tubular handleset in entry function with a Schlage C keyway as standard, so the difference from the Deltana trio is styling and keyway rather than role on the door.
7) I need a Grade 2 rated single cylinder handleset instead of the Emtek 4211 - what should I order?
The Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is Grade 2 in an entrance function and fits doors 1-3/8 inch to 1-3/4 inch. The Master Lock HDLBA0615/4D is also Grade 2, a single cylinder deadbolt handleset in an entrance function. Both carry a stated grade, which matters when a facility spec or purchase order calls one out; the Emtek 4211 Wilshire is a residential brass tubular entry handleset.
8) Which handleset should I use if I want a keypad or touchscreen deadbolt instead of a keyed cylinder?
The Emtek 4211 Wilshire is a mechanical, non-electronic single cylinder handleset. For an electronic opening, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs a Halifax lever with a Contemporary SmartCode keypad electronic deadbolt and ships with an RCAL latch and RCS strike for a 1-3/4 inch door. The Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset covers 1-3/4 inch to 2-1/4 inch, and the BYRD226CBARX version of the same Ridgefield handleset adds Wi-Fi and Bluetooth.
9) What is the difference between the Emtek 4211 Wilshire and a dummy handleset like the Weslock 2815?
They are not interchangeable. The Emtek 4211 Wilshire is a keyed single cylinder entry handleset and ships as a complete set with latch and strike plate. The Weslock 2815 Hillcrest with New Heaven lever and the Weslock 6695 Belmont with Impresa knob are both dummy function, meaning surface-mounted trim with no latch and no cylinder. Use a dummy on an inactive leaf of a pair of doors; use the keyed handleset on the operating door.
10) Is a mortise entry trim like the Baldwin 6542 Tremont a substitute for the Emtek 4211 Wilshire handleset?
No, the door prep is different. The Emtek 4211 Wilshire is a tubular lock using a standard 2-1/8 inch cross bore with a 2-3/8 inch or 2-3/4 inch backset. The Baldwin Estates 6542 Tremont is mortise entry trim for a 1-3/4 inch door, which requires a mortise pocket routed into the edge of the door. The 6542 comes in a single cylinder entrance version and a double cylinder version. Swapping between tubular and mortise means new door machining, not a trim change.
11) Can I match an existing Kwikset SmartKey system with the Emtek 4211 Wilshire, or do I need a different handleset?
The Emtek 4211 Wilshire ships with a Schlage C keyway and can be built with a Weiser WR5 keyway at no upcharge, which lets it key into an existing Weiser system. It does not use SmartKey. To stay on a SmartKey system, the Kwikset 687AMD Amador single cylinder handleset is offered in a SmartKey version and in an SC1 keyway SmartKey version, both Grade 3 entrance function exterior-only trim for 1-3/4 inch doors, as is the Kwikset 687BW Belleview with SmartKey.
12) What is single cylinder on an entry handleset, and can I get a thumbturn instead of a key inside?
Single cylinder means the 4211 Wilshire is keyed on the outside only, with a thumbturn on the interior for the deadbolt. That is the normal choice for a front door with no glass near the lock. If there is glass within arm's reach of the deadbolt, buyers usually go double cylinder so the bolt cannot be reached through a broken pane. Baldwin's Estates 6542 Tremont is offered in both single and double cylinder trim if you need the keyed-inside version.
13) Is the Emtek 4211 Wilshire a mortise or a tubular handleset, and which should I be buying?
Tubular. The Wilshire 4211 uses a bored tubular lock, so it installs in a standard 2-1/8 inch cross bore with a 5-1/2 inch center-to-center layout rather than requiring a mortise pocket routed into the door edge. That makes it the straightforward choice for a retrofit or a pre-bored door. A mortise handleset is the alternative when you want the heavier chassis and a lever-retracted latch, but it needs the door edge machined for it, which is not a job most people want on an existing slab.
14) What is the interconnect device option on the Emtek 4211 and when do I need it?
The Emtek 443 Interconnect Device links the deadbolt to the inside trim so one motion on the interior lever or knob retracts both the latch and the deadbolt. That is what you want on a door that has to allow single-motion egress. Two conditions come with it: handing must be specified, and the interconnect is not available if you go double cylinder or take the EMPowered upgrade. If you want an interconnected lock from another brand, the Schlage Residential JI18/19 is an interconnected unit with a keyed deadbolt.
15) What finishes does the Emtek Wilshire handleset come in, and will it match my other brass hardware?
Ten finishes across the range: Oil Rubbed Bronze (US10B), Polished Nickel Lifetime (US14), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), Satin Brass (US4), and French Antique (US7). Every finish is offered with either the Schlage or the Weiser cylinder. The body is solid brass, so the unlacquered option will patina over time while the lifetime finishes hold. Split finish is available if you want the exterior and interior to differ.
16) Is the Emtek 4211 Wilshire handleset rated for a commercial entrance?
The Wilshire 4211 is a residential handleset. Brass tubular construction, entry function, sold for houses and residential units rather than commercial traffic doors. For a commercial or higher-cycle opening, look at a graded product instead: the Master Lock HDLB Series is a Grade 2 single cylinder deadbolt handleset, and the Schlage Residential F60 Addison is Grade 2 as well.
17) What is a comparable solid brass entry handleset if the Emtek Wilshire is not the look I want?
Staying in solid brass, Deltana offers several entry handlesets: the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston are all solid brass entry function. The Deltana 810871 Montego matches the Wilshire's 1-3/8 to 2 inch door thickness range. On the traditional side, Weslock's 2810 Hillcrest with Hudson knob is also a single cylinder handleset covering 1-3/8 to 2 inch doors. If you want an electronic deadbolt in the same package rather than a keyed cylinder, the Yale Assure Lock Ridgefield handlesets go that direction.
18) I need several front doors in a building keyed alike. Can the Emtek Wilshire handlesets be keyed to one key?
Keyed alike is a standard ordering option on the Wilshire 4211, at no charge, and you can also submit a key code so the cylinders are cut to a system you already run. Standard cylinder is Schlage C; if the building is already on Weiser, take the WR5 cylinder instead and it keys into that system with no upcharge. Order the same finish and the same inside trim across the units and the openings will match.
19) I want a keyed handleset with an interior knob already matched - what are the options besides the Emtek Wilshire?
The Emtek 4211 Wilshire is ordered with the inside knob or lever selected separately from the brass knob and lever range, plus handing and backset. If you would rather order one preset combination, the Weslock 2810 Hillcrest single cylinder handleset comes with the Hudson knob and fits 1-3/8 inch to 2 inch doors, the same thickness range the 4211 covers. The Baldwin Wesley handleset is offered with the Alcott knob and with the Carnaby knob, both entrance function.
20) What should I use instead of the Emtek 4211 if the door does not need to lock with a key?
The Emtek 4211 Wilshire is a keyed single cylinder entrance handleset. If the opening does not need a key, the Schlage Residential JE285 Barcelona style handleset with Seville lever is a non-keyed entry function, Grade 2, for doors 1-3/8 inch to 1-3/4 inch. The Yale BYRD256 CBARX pairs a key-free touchscreen deadbolt with a Ridgefield passage handleset and trim for 1-3/4 inch to 2-1/4 inch doors if you want code entry rather than a cylinder.
21) The Emtek 4211 needs an interconnect device for a one-motion exit - is there a handleset that comes interconnected?
The Emtek 4211 Wilshire reaches an interconnected arrangement by adding the Emtek 443 Interconnect Device, and handing must be specified when an interconnect is ordered. If you would rather buy it interconnected as one unit, the Schlage Residential JI18/19 is an interconnected passage lock with keyed deadbolt and Torino lever in satin stainless steel, Grade 2, for doors 1-3/8 inch to 1-3/4 inch. Note it is a passage lever with a separate keyed deadbolt rather than a keyed entry handleset.
22) Is there a simpler single cylinder handleset than the Emtek Wilshire for a rental unit front door?
The Pamex FS7P31 Lexington single cylinder handleset comes in a satin nickel finish in an entry function for doors 1-3/8 inch to 1-3/4 inch, ordered as one configuration rather than built up from trim, handing, and backset choices. The Emtek 4211 Wilshire is a brass handleset offered in ten finishes including Satin Nickel US15 and Oil Rubbed Bronze US10B, with the inside knob or lever chosen at order time, which is the route to take when the unit has to match other doors in the building.
23) Does the Emtek 4211 Wilshire fit a 1-3/4 inch door, or do I need one of the Kwikset or Baldwin handlesets?
The Emtek 4211 Wilshire covers 1-3/8 inch to 2 inch, so a 1-3/4 inch door is within its range and no substitution is needed on thickness alone. Several peers are built specifically for 1-3/4 inch: the Kwikset 687AMD Amador, the Kwikset 687BW Belleview, and the Baldwin Estates 6542 Tremont mortise trim all list 1-3/4 inch. Choose among them on function and keyway rather than on fit, since the 4211 already spans that thickness.
24) Can I put a lever on the inside of the Emtek 4211 Wilshire instead of a knob?
Levers and knobs are both available for the interior trim, and the choice is required at order. The range runs from traditional shapes like the Cortina, Milano and Turino levers and the Egg, Melon and Providence knobs, through crystal options like the Windsor and Georgetown, to modern L-Bar, T-Bar and R-Bar styles in faceted, hammered, knurled and white marble treatments. Picking a lever makes handing mandatory, so know which way your door swings before you order.
How fast can I get the Emtek 4211-US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 4211-US15 come with a warranty?
Absolutely. The Emtek 4211-US15 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 4211-US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 4211-US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!