Emtek 4313 Richmond Single Cylinder Entrance Handleset - Brass Tubular
- Can be ordered with any Brass Knob or Lever for the inside trim
- Sold as a complete set. Includes Latch and Strike Plate
- Standard 2-1/8" Door Prep. Door Prep 5-1/2" Center-to-Center
- Schlage C Keyway
- Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
- Handing required if Lever used on inside or if Interconnect device is specified
Weiser® (WR5) Keyway
Specify by adding "W" to the beginning of Product Code for Weiser (WR5) Keyway.
No upcharge for cylinder substitution. Can be keyed into existing Weiser system.
Specifications:
- Backset: 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Door Thickness: 1-3/8" to 2"
- Keyway: Schlage C
- Handing: Required – specify left or right
Manufacturer Resources
Product Specs
- Subcategory:
- Handlesets
- Collection:
- Brass
- Product Type:
- Handlesets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Keyed Function:
- Single Cylinder
- Commercial/Residential:
- Residential
- Lock Type:
- Tubular
- Keyed:
- Yes
- Lock Function:
- Entry
- Series:
- Richmond
- Theme:
- American Classic
- Electronic:
- No
- Handle Type:
- Handleset
- MAP Policy:
- Yes
- Product Model:
- 4313
- (CTC) Center-to-Center:
- 5-1/2"
- Product Function:
- Entry
- Product Style:
- American Classic
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 4313-US15 – Frequently Asked Questions
1) Does the Emtek 4313 Richmond handleset drop into an existing door prep, or do I have to re-bore?
It uses the standard residential prep: 2-1/8 inch cross bore with 5-1/2 inch center to center between the deadbolt and the knob bore. If the door already carries a handleset on 5-1/2 inch centers, no new boring is needed. Openings drilled on 5-1/2 inch centers are far and away the common residential handleset spacing, but measure yours before you order because some handlesets run longer centers.
2) What backset do I need to order for an Emtek Richmond entrance handleset?
Two backsets are offered on the Richmond 4313, 2-3/8 inch and 2-3/4 inch, and the latch ships 2-3/8 inch unless you say otherwise. Measure from the door edge to the center of the bore: 2-3/8 and 2-3/4 are the two standard residential backsets, and getting it wrong means the latch won't reach the strike. Specify 2-3/4 inch on the order if that's what your door is bored for.
3) Do I have to specify handing on the Emtek 4313 Richmond handleset?
Handing is required on this one, right hand or left hand. It matters whenever a lever is used for the inside trim, since a lever has to point away from the hinges, and it matters if you add the interconnect device. Stand outside the door: if the hinges are on your right, it's right hand.
4) Can I key an Emtek Richmond handleset into my existing Schlage or Weiser keys?
Both keyways are available on the Richmond 4313. Schlage C is the standard cylinder, and a Weiser WR5 cylinder can be ordered instead at no upcharge, which lets it key into an existing Weiser system. Keyed alike and keyed different are both offered, and you can supply an existing key code so the new handleset works on keys already in the building.
5) What else do I need to buy to install an Emtek 4313 Richmond handleset?
Nothing extra for the basic install. The Richmond 4313 ships as a complete set with the latch and strike plate included. You do have to pick the inside trim, though, since the interior knob or lever is a required selection rather than an add-on, and any Emtek brass knob or lever works with it.
6) Which handleset covers the same 1-3/8 inch to 2 inch door thickness range as the Emtek 4313 Richmond?
The Emtek 4313 Richmond single cylinder entrance handleset fits doors 1-3/8 inch to 2 inch. Two other handlesets state the same range: the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob and the Deltana 810871 Montego handleset. The Weslock 2810 is a single cylinder keyed function like the 4313; the Deltana Montego is the same door prep range in a different handle style.
7) What is the closest alternative to the Emtek 4313 Richmond handleset for a door thicker than 2 inches?
The Emtek 4313 Richmond entrance handleset covers doors from 1-3/8 inch to 2 inch. For a thicker slab, the Weslock 1411 Traditionale Colonial handleset with Eleganti knob covers 1-3/4 inch to 2-1/4 inch in a single cylinder function, and the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset also covers 1-3/4 inch to 2-1/4 inch. The Weslock keeps the keyed mechanical cylinder; the Yale replaces the key with a touchscreen deadbolt.
8) What handleset carries an ANSI grade rating if the Emtek Richmond does not fit a facility spec that requires one?
The Emtek 4313 Richmond is a residential brass entrance handleset. Where a submittal calls for a stated grade, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is Grade 2, as is the Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever. The Kwikset 687AMD Amador single cylinder handleset is Grade 3. All three are keyed entrance function like the 4313.
9) Is a Kwikset 687AMD Amador handleset a drop-in replacement for an Emtek 4313 Richmond?
No. The Kwikset 687AMD Amador single cylinder handleset is sold as exterior trim only and lists a 1-3/4 inch door thickness, while the Emtek 4313 Richmond is a complete set that includes the latch and strike plate, takes an inside knob or lever of your choice, and covers 1-3/8 inch to 2 inch doors. Ordering the 687AMD to replace a 4313 leaves you without interior trim.
10) What is the difference between the Emtek 4313 Richmond and a Baldwin Estates 6542 Tremont entry trim?
The Emtek 4313 Richmond is a tubular handleset with a 2-1/8 inch cross bore, 5-1/2 inch center-to-center prep, and 2-3/8 inch or 2-3/4 inch backset. The Baldwin Estates 6542 Tremont is mortise entry trim for a 1-3/4 inch door and comes in single cylinder (6542ENTR) and double cylinder (6542DBLC) versions. A tubular set and a mortise trim are different door preps, so they are not interchangeable in an existing opening.
11) Does the Emtek Richmond handleset lock with a key from the inside, or a thumbturn?
Single cylinder, so it's keyed outside and a thumbturn inside. That's the usual choice for an entry door with no glass near the lock, since nobody is trapped inside without a key in a fire. If the door has sidelights or glazing within reach of the turn, look at a double cylinder trim instead, such as the Baldwin Estates 6542 Tremont double cylinder entry trim.
12) Can I get the Emtek Richmond handleset so the knob and the deadbolt turn together?
That takes the Emtek 443 Interconnect Device, which is offered as an option with the Richmond 4313 and retracts the latch and deadbolt in one motion. Two conditions: it can't be combined with a double cylinder or the EMPowered electronic upgrade, and specifying it makes handing mandatory. If you'd rather buy interconnected function as a single unit, the Schlage Residential JI18/19 interconnected lock with keyed deadbolt is a comparable.
13) Is the Emtek 4313 Richmond handleset rated for a commercial entrance or apartment corridor?
It's a residential product, solid brass tubular construction in Emtek's American Classic styling. For a rental unit's front door or a single family entry it's the right class of hardware. If you're specifying to a commercial grade requirement, look at graded product instead: the Schlage Residential F60 Addison handleset and the Master Lock HDLB Series single cylinder deadbolt handleset are both Grade 2.
14) I need to key several front doors alike across a building. Can the Emtek Richmond handlesets be keyed together?
Keyed alike is a no cost option on the Richmond 4313, and you can also submit an existing key code so the new units run on keys already in circulation. Keyed different is the alternative if each unit needs its own key. Pick one cylinder type across the whole order, Schlage C or Weiser WR5, since the two can't be keyed to each other.
15) What's a comparable solid brass entry handleset to the Emtek Richmond if I want a different look?
Deltana's solid brass entry handlesets sit in the same territory: the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston are all entry function solid brass. The Deltana 810871 Montego matches the Richmond's 1-3/8 to 2 inch door range exactly. What the Richmond gives you that they don't is the choice of ten finishes and any Emtek brass knob or lever for the interior.
16) What is the electronic equivalent of the Emtek 4313 Richmond handleset for a keypad or app-controlled entry?
The Emtek 4313 Richmond is a mechanical, non-electronic handleset. For keypad or connected entry with a handleset, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs a Halifax lever interior with a contemporary SmartCode keypad electronic deadbolt on a 1-3/4 inch door. The Yale Real Living BYRD226CBARX Assure Lock adds Wi-Fi and Bluetooth touchscreen with the Ridgefield handleset for 1-3/4 inch to 2-1/4 inch doors, and the BYRD256 CBARX is a key-free touchscreen version with a Ridgefield passage handleset.
17) I need a handleset that matches my existing Kwikset SmartKey keys instead of the Emtek Schlage C keyway. What are my options?
The Emtek 4313 Richmond ships with a Schlage C keyway and can be ordered with a Weiser WR5 keyway by adding a W to the product code, so it keys into an existing Weiser system. To stay on Kwikset SmartKey, the Kwikset 687AMD SMT Amador and 687BW SMT Belleview single cylinder handlesets are SmartKey keyed entry, and the 687AMD SMC version uses an SC1 keyway with SmartKey. All three are exterior trim only.
18) I need a matching handleset for an inactive or non-locking door alongside the Emtek 4313 Richmond. What should I order?
The Emtek 4313 Richmond is a keyed single cylinder entrance function, so it is not the part for a fixed or inactive leaf. For a dummy handleset, the Weslock 2815 Hillcrest with New Heaven lever and the Weslock 6695 Belmont with Impresa knob are both dummy function, covering 1-3/8 inch to 2 inch doors. The Schlage Residential JE285 Barcelona handleset with Seville lever is a non-keyed entry function for 1-3/8 inch to 1-3/4 inch doors.
19) Which solid brass handlesets compare to the Emtek 4313 Richmond?
The Emtek 4313 Richmond is a brass tubular entrance handleset in a brass collection. In solid brass entry function, the Deltana 803871B Hanover, 815871 St. Ann, and 825871 Kingston handlesets are all solid brass entry handlesets, each in its own series. They match the 4313 on material and entry function while differing in handle style.
20) What is an alternative to adding the Emtek 443 interconnect device to a Richmond handleset?
The Emtek 4313 Richmond can be ordered with the Emtek 443 interconnect device, which makes handing a required specification. If you would rather buy the interconnected function as a single assembly, the Schlage Residential JI18/19 is an interconnected passage lock with keyed deadbolt and Torino lever in satin stainless steel, Grade 2, for 1-3/8 inch to 1-3/4 inch doors.
21) Is the Pamex FS7P31 Lexington handleset a substitute for the Emtek 4313 Richmond in satin nickel?
The Pamex FS7P31 Lexington is a single cylinder handleset in a satin nickel finish, entry function, for doors 1-3/8 inch to 1-3/4 inch. The Emtek 4313 Richmond is also offered in Satin Nickel US15 as a single cylinder entrance handleset and covers 1-3/8 inch to 2 inch doors. If the slab is over 1-3/4 inch, the 4313 is the one that covers it.
22) What finishes does the Emtek 4313 Richmond entrance handleset come in?
Ten finishes across the solid brass Richmond 4313: Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), Satin Brass (US4), French Antique (US7), Oil Rubbed Bronze (US10B), Polished Nickel Lifetime (US14), Satin Nickel (US15), Pewter (US15A), Flat Black (US19) and Polished Chrome (US26). Every one of those is available with either the Schlage or the Weiser cylinder. If you want the exterior handle and the interior trim in different finishes, a split finish can be specified on the order.
23) Which handleset lets me pick the interior knob separately, like the Emtek Richmond does?
The Emtek 4313 Richmond can be ordered with any brass knob or lever for the inside trim, chosen at order time. Among fixed-pairing alternatives, the Baldwin Wesley handleset ships as a set combination: 180WYHXATK pairs it with the Alcott knob and 180WYHXCYK with the Carnaby knob, both entrance function. Weslock 2810 Hillcrest comes paired with the Hudson knob. With those, the interior knob is part of the part number rather than a separate selection.
How fast can I get the Emtek 4313-US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 4313-US15 come with a warranty?
Absolutely. The Emtek 4313-US15 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 4313-US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 4313-US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.