Emtek 454727 Ridgemont Grip by...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,129.00
$903.20
Emtek Emtek 454727 Ridgemont Grip by Grip Entrance Handleset - Sandcast Bronze Tubular - Double Cylinder EMTEK-454727

Emtek 454727 Ridgemont Grip by Grip Entrance Handleset - Sandcast Bronze Tubular - Double Cylinder

(No reviews yet) Write a Review

Model: 454727-FB
From the Sandcast Bronze Collection
$1,129.00
$903.20
Selected Finish is
Selected Backset is
Selected FREE KEYING Options is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,129.00
$903.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 454727 Ridgemont Grip by Grip Entrance Handleset - Sandcast Bronze Tubular - Double Cylinder

• Handing Not Required
• Standard door thickness of 1-3/4”. Specify if thicker.
• Standard latch is for 2-3/8” backset. Specify 2-3/4”backset if required.
• Grip by Grip is a custom function made to order and requires an additional 2-3 day lead time.

Weiser® (WR5) Keyway
• Specify by adding “W” to the beginning of product code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system

 

 

Specifications:

  • Backset: 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 2"
  • Keyway: Schlage C
  • Handing: Required – specify left or right

Product Specs

Subcategory:
Grip by Grip Entrance Handlesets
Collection:
Sandcast Bronze
Product Type:
Grip by Grip Entrance Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Keyed Function:
Double Cylinder
Commercial/Residential:
Residential
Lock Type:
Tubular
Keyed:
Yes
Lock Function:
Entry
Series:
Ridgemont
Theme:
Rustic Living
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
454727
(CTC) Center-to-Center:
5-1/2"
Product Function:
Double Cylinder
Product Style:
Sandcast Bronze
Product Material:
Bronze
Product Category:
Mechanical Locks
Product Substrate:
Bronze
Department:
Door Hardware

Emtek 454727-FB – Frequently Asked Questions

1) Will the Emtek 454727 Ridgemont handleset fit my existing door prep?
The Ridgemont grip by grip handleset is a tubular lockset that drops into a standard 2-1/8 inch cross bore, and the latch comes in either a 2-3/8 inch or 2-3/4 inch backset, which you pick when you order. Door thickness runs 1-3/8 inch to 2 inch, with 1-3/4 inch as the standard build; if your door is thicker than that, say so on the order. The grip mounting is on 5-1/2 inch centers, so measure the existing bolt centers on the exterior grip before you assume it covers the old holes.
2) What does double cylinder mean on the Emtek Ridgemont entrance handleset?
Double cylinder means it takes a key on both sides. There is no thumbturn on the interior, so the deadbolt can only be thrown or retracted with a key from inside as well as outside. That is what people specify next to glass, where a thumbturn could be reached through a broken lite. It is also why many jurisdictions restrict double cylinder deadbolts on a required means of egress; if the opening is a code-governed exit, check the local requirement before you order this rather than the single cylinder function.
3) Can the Emtek Ridgemont handleset be keyed into my existing Schlage or Weiser keys?
It ships on a Schlage C keyway as standard, and Emtek offers a Weiser WR5 cylinder as a no-upcharge substitution if that is what the rest of the house runs, which lets it key into an existing Weiser system. Keying itself is free either way: choose keyed different or keyed alike across the order, and if you have a bitting code from the existing system you can enter it as keying to code so the new handleset works on the keys you already carry.
4) What do I have to specify when ordering the Emtek 454727 Ridgemont handleset?
Four things get chosen on the order. Backset, 2-3/8 inch or 2-3/4 inch, which has to match the bore location on your door. Finish, from the three bronze options. Keying, either keyed different or keyed alike, plus a key code if you are matching an existing system. And keyway, Schlage C as standard or Weiser WR5. Two more are optional: a door thickness note if your door falls outside the standard 1-3/4 inch, and a split finish if the two faces should differ.
5) How do I tell whether my door needs a 2-3/8 or a 2-3/4 inch backset?
Measure from the edge of the door to the center of the large bore hole. Two and three eighths and two and three quarters are the only two backsets in residential use, and the Ridgemont handleset latch is available in both. Getting it wrong means the latch will not reach the bore, so measure the door rather than guessing from the age of the house.
6) What is a grip by grip handleset and how is it different from a regular entry handleset?
Grip by grip means you get the full gripped handle on both faces of the door, exterior and interior, instead of the usual arrangement of a grip outside and a lever or knob inside. It reads as a front entrance from both sides, which is why it gets specified on doors people see from inside a foyer. It is a custom function that Emtek builds to order rather than a stock configuration, so it is not the one to pick if you just need an interior lever.
7) What finishes does the Emtek 454727 Ridgemont sandcast bronze handleset come in?
Three finishes: Flat Black Bronze (FB), Medium Bronze (MB), and Tumbled White Bronze (TWB). These are living finishes on solid sandcast bronze, so they move over time with handling and weather rather than staying uniform like a plated finish. If you want the exterior grip in one finish and the interior in another, that is orderable as a split finish.
8) Is the Emtek Ridgemont handleset rated for a commercial building or an apartment entry?
Emtek classes the Ridgemont sandcast bronze handleset as residential hardware. For a single family home, a townhouse front door, or an owner unit it is the right kind of product. For commercial openings, or multi-family entries where a facility is standardizing on graded hardware and cylinder control, a Grade 1 or Grade 2 commercial lockset is the correct specification instead of this one.
9) Will the Emtek Ridgemont handleset work on a 1-3/8 inch door?
Yes, 1-3/8 inch is within the 1-3/8 to 2 inch thickness range the Ridgemont tubular handleset covers, which is the thickness of a lot of older interior and lighter exterior doors. The build standard is 1-3/4 inch, so note the actual thickness on the order so the spindle and screw pack come sized for it.
How fast can I get the Emtek 454727-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 454727-FB come with a warranty?
Absolutely. The Emtek 454727-FB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 454727-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 454727-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!