Emtek 454111 Remington Grip by...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,226.00
$980.80
Emtek Emtek 454111 Remington Grip by Grip Entrance Handleset - Sandcast Bronze Tubular - Double Cylinder EMTEK-454111

Emtek 454111 Remington Grip by Grip Entrance Handleset - Sandcast Bronze Tubular - Double Cylinder

(No reviews yet) Write a Review

Model: 454111-FB
From the Sandcast Bronze Collection
$1,226.00
$980.80
Selected Finish is
Selected Backset is
Selected FREE KEYING Options is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,226.00
$980.80
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 454111 Remington Grip by Grip Entrance Handleset - Sandcast Bronze Tubular - Single Cylinder

  • Handing Not Required
  • Standard door thickness of 1-3/4”. Specify if thicker.
  • Standard latch is for 2-3/8” backset. Specify 2-3/4”backset if required.
  • Grip by Grip is a custom function made to order and requires an additional 2-3 day lead time.

Weiser® (WR5) Keyway

  • Specify by adding “W” to the beginning of product code.
  • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system

 

 

Specifications:

  • Backset: 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 2"
  • Keyway: Schlage C
  • Handing: Required – specify left or right

Product Specs

Subcategory:
Grip by Grip Entrance Handlesets
Collection:
Sandcast Bronze
Product Type:
Grip by Grip Entrance Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Keyed Function:
Double Cylinder
Commercial/Residential:
Residential
Lock Type:
Tubular
Keyed:
Yes
Lock Function:
Entry
Series:
Remington
Theme:
Rustic Living
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
454111
(CTC) Center-to-Center:
5-1/2"
Product Function:
Double Cylinder
Product Style:
Sandcast Bronze
Product Material:
Bronze
Product Category:
Mechanical Locks
Product Substrate:
Bronze
Department:
Door Hardware

Emtek 454111-FB – Frequently Asked Questions

1) What does "grip by grip" mean on the Emtek 454111 Remington handleset?
Grip by grip means you get a thumb-piece grip handle on both the outside and the inside of the door, instead of the usual exterior grip with an interior knob or lever. On the 454111 Remington it is paired with a double cylinder entry function, so the lock is keyed from both sides. Emtek builds grip by grip as a custom made-to-order function.
2) Is a double cylinder handleset allowed on a house exit door?
A double cylinder lock needs a key to operate from the inside as well as the outside, which is why people choose it for doors with glass beside or within them. Many residential codes restrict keyed-both-sides locks on required egress doors, so check your local code before specifying. The 454111 Remington is a residential product and the lock is keyed on both sides by design; if you need thumbturn release inside, order the single cylinder version of the Remington handleset instead.
3) Will the Emtek Remington handleset fit my existing door prep?
It drops into a standard residential bore: 2-1/8 inch cross bore, with a latch for either a 2-3/8 or 2-3/4 inch backset, and it covers doors from 1-3/8 up to 2 inches thick. The grips mount 5-1/2 inches center to center, so the door needs that spacing between the upper and lower bore. If your existing handleset uses a different center-to-center, you will be patching or replacing the door face.
4) Which backset do I order for the Remington grip by grip handleset?
Backset is a required choice, 2-3/8 or 2-3/4 inches. The standard latch ships 2-3/8; specify 2-3/4 if that is what your door is bored for. Measure from the door edge to the center of the bore before you order, because the latch is cut for one or the other.
5) Can I key the Emtek 454111 into my existing Weiser keys?
Yes. The handleset ships with a Schlage C keyway as standard, but a Weiser WR5 keyway is available at no upcharge for the cylinder substitution, and it can be keyed into an existing Weiser system. Order it by adding a "W" to the front of the product code.
6) Can I have several Emtek handlesets on one key, or keyed to my existing code?
Keying is a required selection: keyed different or keyed alike. Keyed alike puts every handleset on the order on one key, which is what you want when the front, back, and side doors of a house all get the same key. There is also a keying-to-code field, so if your building already runs a key code you can supply it and have the cylinders cut to match.
7) What if my door is thicker than 1-3/4 inches?
The Remington grip by grip is built as standard for a 1-3/4 inch door, and the published range runs 1-3/8 to 2 inches. If your door is thicker than standard, state the actual thickness when you order so Emtek supplies the correct spindle and screw lengths.
8) Is this Emtek handleset suitable for a commercial entrance?
No. The 454111 Remington is a residential tubular lockset in Emtek's Sandcast Bronze collection. For a commercial opening that needs a graded, mortise or cylindrical lock, this is not the right family.
9) What finishes does the Emtek Remington sandcast bronze handleset come in?
Three: Flat Black Bronze (FB), Medium Bronze (MB), and Tumbled White Bronze (TWB). These are solid sandcast bronze, so the finish is on real bronze rather than plated steel and it will patina with handling and weather. A split finish is available as an option if you want a different look inside than out.
10) Is the Emtek 454111 an electronic or smart lock?
It is a fully mechanical, key-operated handleset. No electronics, no batteries, no wiring, so nothing to rough in at the door and no power required.
How fast can I get the Emtek 454111-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 454111-FB come with a warranty?
Absolutely. The Emtek 454111-FB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 454111-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 454111-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!