Emtek 460121 Monolithic with San Carlos Grip Entrance Handleset - Wrought Steel Tubular - Dummy

It's a dummy handleset, so there is no latch, no bolt, and no key. The San Carlos grip and the interior knob or lever are fixed trim that mount to the face of the door, meant for the inactive leaf of a double door, a pantry, or a closet where you only need something to pull on. If you need a working entry set, look at a keyed or non-keyed entrance handleset instead.

No boring needed. The 460121 is surface mount, so it fastens to the face of an existing door with no cross bore or latch prep. That makes it usable on a slab that was never drilled, and it means a door already bored for a lockset can look odd unless you plug the holes first.

Yes, it covers 1-3/8 inch through 1-3/4 inch doors, which spans a standard interior slab and a standard exterior thickness. There's a door thickness field on the order so you can call out your actual thickness.

The San Carlos grip mounts on 5-1/2 inch centers. Measure the vertical distance between the two through-bolt holes on the plate you're removing: at 5-1/2 inches you'll land on the existing holes, and anything else means new holes and possibly a visible shadow from the old escutcheon footprint.

Handing is a required selection, right hand or left hand. It matters when you pick a lever for the inside, since a lever has to point toward the latch edge. Emtek notes handing is required if a lever is used inside. Stand outside the door: if the hinges are on your right, it's right hand.

The Emtek 460121 San Carlos is rated 1-3/8 inch to 1-3/4 inch. For a 2 inch slab, the Deltana 810871 Montego Handleset covers 1-3/8 inch to 2 inch, the Weslock 2810 Hillcrest Single Cylinder Handleset with Hudson Knob covers 1-3/8 inch to 2 inch, and the Weslock 1411 Traditionale Colonial Handleset with Eleganti Knob covers 1-3/4 inch to 2-1/4 inch. The Weslock 2810 and the Weslock 1411 are both single-cylinder, so they add a keyed exterior the Emtek dummy does not have.

The Emtek 460121 San Carlos is a dummy-function handleset, so the direct peers by function are the Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever and the Weslock 6695 Belmont Dummy Handleset with Impresa Knob, both of which carry a Dummy product function. The Emtek 460121 mounts to a door 1-3/8 inch to 1-3/4 inch thick, while the Weslock 2815 and the Weslock 6695 both cover 1-3/8 inch to 2 inch. On a thicker slab the Weslock pair reaches further; within 1-3/4 inch all three suit the same inactive or French door leaf.

The Emtek 460121 San Carlos is non-keyed, so it will not secure an opening. For a keyed exterior door on the same 1-3/8 inch to 1-3/4 inch slab, the Schlage Residential F60 Addison Single Cylinder Keyed Entry Handleset with Accent Lever is a Grade 2 entrance-function handleset in that thickness range, and the Pamex FS7P31 Lexington Single Cylinder Handleset is an entry-function handleset covering the same range. Both replace the dummy grip with a cylinder and a working latch.

No. The Schlage Residential JE285 Barcelona Style Handleset with Seville Lever is listed as non-keyed but carries an entrance product function, meaning it still operates a latch. The Emtek 460121 San Carlos is dummy function, a surface-mounted pull that requires no door prep and does not retract anything. Use the Emtek 460121 on a leaf that stays fixed, and the Schlage JE285 where the door has to open and latch without a key.

You choose it, and it ships as a complete set with whatever you pick. The inside trim options are the Lafayette, Normandy, and San Carlos levers, and the Jamestown, Savannah, Madison Black, and Madison Ivory knobs. Any Wrought Steel knob or lever works as the inside trim. Pick a knob and handing stops being a fit issue; pick a lever and you have to get the hand right.

It's a residential product, and it's a dummy set with no locking function, so it isn't the part for a commercial opening or any door that has to secure. For a graded residential entry handleset the Schlage F60 Addison with Accent lever and the Master Lock HDLB Series single cylinder deadbolt handleset are both Grade 2.

Weslock makes two dummy handlesets we carry: the 6695 Belmont with Impresa knob from the Elegance Series, and the 2815 Hillcrest with New Heaven lever from Premiere Essentials. Both list a 1-3/8 inch to 2 inch door thickness range, so they'll go on a thicker slab than the Emtek's 1-3/4 inch ceiling.

That's the usual reason to buy it. The dummy carries the same San Carlos grip and Wrought Steel finish as the working set, so a pair of doors reads identically while only the active leaf gets a latch. Order both in the same finish, Flat Black Steel or Satin Steel, and the inactive leaf gets no prep at all since the dummy is surface mount.

The Emtek 460121 San Carlos is a residential handleset in the Wrought Steel collection. Among the graded residential handlesets, the Kwikset 687AMD Amador and Kwikset 687BW Belleview are Grade 3, while the Schlage Residential F60 Addison and the Master Lock HDLB Series single cylinder deadbolt handleset are Grade 2. If a facility spec calls for a stated grade on the entry, those are the ones that carry it.

The Emtek 460121 San Carlos is non-electronic and dummy function, which is what you want on the inactive leaf. For the active door with electronic control, the Kwikset 815SCEHFL San Clemente Handleset with Halifax lever pairs a Smartcode keypad electronic deadbolt in the Signature Series, and the Yale Real Living BYRD226CBARX Assure Lock adds Wi-Fi and Bluetooth with the Ridgefield handleset. Note the thickness split: the Emtek 460121 stops at 1-3/4 inch, the Kwikset 815SCEHFL is 1-3/4 inch, and the Yale BYRD226CBARX runs 1-3/4 inch to 2-1/4 inch.

The Emtek 460121 San Carlos is a tubular lock type and mounts to the surface with no door prep required, sold as a complete set with the inside knob or lever chosen with it. The Baldwin Estates 6542 Tremont is entry mortise trim, offered single cylinder or double cylinder, and is rated for a 1-3/4 inch door. Mortise trim goes onto a door prepped with a mortise pocket, so it is not a drop-in swap for a surface-mounted tubular dummy.

The Emtek 460121 San Carlos is sold as a complete set and the inside knob or lever style is selected as part of the order. If you only need the exterior half, the Kwikset 687AMD Amador and the Kwikset 687BW Belleview single cylinder handlesets are exterior-only, Grade 3, and fit a 1-3/4 inch door. That matters when the interior trim is already on the door and you are replacing only the outside.

The Emtek 460121 San Carlos is dummy function, which neither latches nor locks. Where the door has to latch as passage and still take a deadbolt, the Schlage Residential JI18/19 Interconnected Passage Lock with Keyed Deadbolt and Torino Lever is a Grade 2 passage-function set in the JI Series covering 1-3/8 inch to 1-3/4 inch, the same slab range the Emtek 460121 fits.

Two: Flat Black Steel (FBS) and Satin Steel (SWS). Both are part of Emtek's Wrought Steel collection, so they match the rest of the Wrought Steel knobs, levers, and trim if you're carrying one look through a house. There's also a split finish option if you want a different finish inside than out.

The Emtek 460121 San Carlos is a Wrought Steel style handleset with a brass material build in a rustic look. On the solid brass side, Deltana offers the 803871B Hanover Handleset, the 815871 St. Ann Handleset and the 825871 Kingston Handleset, all entry function in solid brass, each its own series. The Deltana three are keyed entry rather than dummy, so they suit the active door where the Emtek 460121 suits a fixed leaf.

Handing is specified on the Emtek 460121 San Carlos when a lever is used for the inside trim, and right hand or left hand is chosen at order. Among the peers, the Weslock 2815 Hillcrest Dummy Handleset is also a lever-trim dummy set, while the Weslock 6695 Belmont Dummy Handleset uses an Impresa knob. Knob trim is symmetrical, so the handing question is really a lever question.

The Emtek 460121 San Carlos pairs the San Carlos grip with a Wrought Steel knob or lever chosen for the inside, and its grip mounts on 5-1/2 inch centers. Baldwin builds the same grip-plus-knob idea into fixed pairings: the Wesley Handleset with Alcott Knob and the Wesley Handleset with Carnaby Knob, both entrance function. The Baldwin sets arrive as a named combination; the Emtek 460121 lets the interior trim be picked separately.

The 460121 is in Emtek's Wrought Steel collection with steel listed as the material and substrate, and the description also calls out brass. Where the two disagree we won't pick one for you, but what's consistent is the finish family: FBS and SWS are the Wrought Steel finishes, and they match the rest of that collection's knobs and levers.