Emtek 460222 Sectional with San Carlos Grip Entrance Handleset - Wrought Steel Tubular - Dummy

It's a dummy handleset, so there's no latch and no cylinder. The grip is fixed and the trim mounts to the face of the door as a surface mount with no door prep needed. Use it on the inactive leaf of a double door, on a closet or pantry door, or on a French door where a separate flush bolt or ball catch holds the door shut. If you need the door to latch or lock, this isn't the part.

Yes, handing is a required choice, right hand or left hand, on every order. It matters because the inside trim can be a lever, and a lever has to swing down toward the door edge on the correct side. The description makes the point directly: handing is required if a lever is used inside. Stand outside the door: if the hinges are on your right it's right hand, hinges on your left it's left hand.

1-3/8 inch to 1-3/4 inch, which covers standard residential interior doors at 1-3/8 and typical exterior doors at 1-3/4. There's a door thickness field on the order so you can call out yours. Thicker than 1-3/4, say a 2 inch door, and you're outside the range; the Deltana 810871 Montego handleset is listed to 2 inches and the Weslock 2815 Hillcrest dummy handleset covers 1-3/8 to 2 inches.

You pick it, and it's a required selection: Lafayette, Normandy or San Carlos lever, or Jamestown, Savannah, Madison Black or Madison Ivory knob. Any Wrought Steel knob or lever works as the inside trim. The set ships complete with both sides, so there's no separate interior trim to order. Choosing a lever is what triggers the handing requirement; the knobs are non-handed.

The Weslock 2815 Hillcrest dummy handleset with New Heaven lever is the nearest match in function - it is a dummy handleset, the same non-latching function as the Emtek 460222, and Weslock lists it for doors 1-3/8 inch to 2 inch thick. The Emtek 460222 covers 1-3/8 inch to 1-3/4 inch. The Weslock 6695 Belmont dummy handleset with Impresa knob is the other dummy-function option, also 1-3/8 inch to 2 inch, if you want a knob rather than a lever on the inside. The Emtek 460222 lets you choose the inside trim at order time from levers or knobs in the Wrought Steel collection.

The Emtek 460222 is a dummy, non-keyed, so it has no latch and no cylinder - it is trim only. For a locking opening on a 1-3/8 inch to 1-3/4 inch door, the Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is a Grade 2 keyed entrance handleset in that same thickness range, and the Pamex FS7P31 Lexington single cylinder handleset is an entry-function handleset also rated 1-3/8 inch to 1-3/4 inch. Both take a key on the outside, which the 460222 does not.

The Emtek 460222 is built for doors 1-3/8 inch to 1-3/4 inch, so a 2 inch door is outside its range. The Deltana 810871 Montego handleset covers 1-3/8 inch to 2 inch, and the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob covers 1-3/8 inch to 2 inch as well. For thicker still, the Weslock 1411 Traditionale Colonial handleset with Eleganti knob is listed for 1-3/4 inch to 2-1/4 inch.

Both are non-keyed, but they are not the same part. The Emtek 460222 is dummy function - it is fixed trim with no latch, so the door it goes on is held by something else. The Schlage Residential JE285 Barcelona style handleset with Seville lever is a Grade 2 non-keyed entry handleset in the J Series for 1-3/8 inch to 1-3/4 inch doors, meaning it has a working latch that retracts. If the opening is an inactive leaf of a double door or a closet that latches elsewhere, the 460222 is the right family; if the door needs to latch shut, the JE285 is.

No. The Emtek 460222 is sold as a complete set and requires you to pick the inside knob or lever style at order time, so interior trim always comes with it. If you want exterior trim only, the Kwikset 687AMD SMT Amador single cylinder handleset is sold exterior only with SmartKey for a 1-3/4 inch door, the 687AMD SMC version of the same Amador is exterior only with an SC1 keyway and SmartKey, and the Kwikset 687BW SMT Belleview is likewise exterior only. All three are Grade 3 entrance function.

Mortise trim sets are the common mix-up. The Baldwin Estates 6542 Tremont single cylinder entry mortise trim and its double cylinder counterpart are entrance-function mortise trim for 1-3/4 inch doors - they dress a mortise lock body and need a mortise pocket cut into the door. The Emtek 460222 is a tubular handleset that surface mounts with no door prep required, so the two are not interchangeable on the same opening. The Schlage Residential JI18/19 interconnected passage lock with keyed deadbolt and Torino lever is another one to watch: it is a Grade 2 passage function interconnected set for 1-3/8 inch to 1-3/4 inch doors, a different assembly from a handleset.

5-1/2 inches center to center. That's the spacing between the mounting points on the sectional grip, and it's the number to check if you're swapping onto a door that already has a handleset on it. Because the trim is surface mounted with no prep required, you're matching screw locations rather than a bored pattern, so measure the existing holes before you count on a clean cover.

Two: Flat Black Steel (FBS) and Satin Steel (SWS). Both are part of Emtek's Wrought Steel collection, which is the rustic, forged-look line, so the grip reads hand-worked rather than polished. There's also an optional split finish field if you want the exterior grip in one finish and the interior trim in the other, which is how people match a black front door outside to lighter interior hardware.

It's a residential-duty handleset, and it's a dummy at that, so it carries no latch and no lock. For a commercial opening or anywhere you need a graded lockset, look at a Grade 2 handleset like the Schlage Residential F60 Addison with Accent lever or the Master Lock HDLB Series single cylinder deadbolt handleset. The 460222 belongs on a house, a closet leaf, or the inactive side of a French door pair.

On a pair of doors you'd typically run a keyed or entry handleset on the active leaf and a dummy on the inactive one, matched in style and finish. The 460222 is the dummy half in the San Carlos grip and Wrought Steel finish, so match the active leaf to the same grip and finish. Among other brands, the Weslock Premiere Essentials line runs the same way: the 2815 Hillcrest is the dummy and the 2810 Hillcrest is the single cylinder version, both 1-3/8 to 2 inch doors.

No boring is needed. The San Carlos dummy handleset is surface mounted and requires no door prep, so it fastens to the face of the door rather than dropping into a 2-1/8 inch cross bore. That makes it workable on a door with no existing prep, and it's why it suits a French door or slab where you don't want to cut into the stile.

The Emtek 460222 is a non-electronic dummy handleset, so it carries no keypad and no deadbolt. If you want an electronic opening, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs a Halifax lever interior trim with a Contemporary SmartCode keypad electronic deadbolt and ships with an RCAL latch and RCS strike, listed for a 1-3/4 inch door. The Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset covers 1-3/4 inch to 2-1/4 inch, and the BYRD226CBARX version of the same Ridgefield handleset adds Wi-Fi and Bluetooth over the same thickness range. All three prep the door for a deadbolt, which the surface-mounted 460222 does not require.

The Emtek 460222 is a residential tubular handleset. If the drawing calls for a graded product, the Schlage Residential F60 Addison keyed entry handleset with Accent lever is Grade 2 in the F Series for 1-3/8 inch to 1-3/4 inch doors, the Schlage Residential JE285 Barcelona handleset with Seville lever is Grade 2 for the same thickness range, and the Master Lock HDLBA0615/4D single cylinder deadbolt handleset in the HDLB Series is Grade 2 as well. Kwikset's 687AMD Amador and 687BW Belleview single cylinder handlesets are Grade 3 entrance sets listed for 1-3/4 inch doors.

Deltana offers several entry handlesets in solid brass with distinct grip designs: the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston are all entry function. The Deltana 810871 Montego is another grip in the same handleset family, listed for 1-3/8 inch to 2 inch doors. Baldwin's Wesley handleset comes paired with either the Alcott knob or the Carnaby knob as entrance function sets, which is the same pick-your-interior-trim approach the Emtek 460222 uses with its Wrought Steel knobs and levers.

The Emtek 460222 requires handing when a lever is used on the inside, so it is ordered right hand or left hand. Among the other dummy-function handlesets, the Weslock 2815 Hillcrest pairs with a New Heaven lever and the Weslock 6695 Belmont pairs with an Impresa knob - both are dummy function for 1-3/8 inch to 2 inch doors. Confirm the swing before ordering any lever-trimmed dummy set.