Emtek 460212 Sectional with Lafayette Grip Entrance Handleset - Wrought Steel Tubular - Dummy

No prep needed. The Lafayette grip dummy handleset is surface mount, so it fastens to the face of the door with no cross bore and no latch bore. That makes it the straightforward choice on a slab you don't want to cut into, or on an inactive leaf that was never bored.

Yes, the 460212 covers 1-3/8 inch through 1-3/4 inch doors, which spans both the older interior slab thickness and the standard 1-3/4 inch exterior door. There's a door thickness field on the order so you can state what you actually have.

Handing is required on the order, right hand or left hand, and it matters specifically because a lever has to point the correct way. If you're pairing the Lafayette grip with a knob instead, the knob is symmetrical, but the order still asks for the hand so the set ships matched to your opening.

You pick it, and it ships as a complete set. The choices are the Lafayette, Normandy and San Carlos levers, or the Jamestown, Savannah, Madison Black and Madison Ivory knobs. Nothing extra to order for the inside of the door.

The Weslock 2815 Hillcrest dummy handleset with New Heaven lever is the nearest match in function. Both are dummy-function handlesets, so neither latches or locks - the grip is fixed and pulls the door only. The Emtek 460212 mounts on doors 1-3/8 inch to 1-3/4 inch thick and is surface mount with no door prep, while the Weslock 2815 covers 1-3/8 inch to 2 inch. The Weslock 6695 Belmont dummy handleset with Impresa knob is the same dummy function with a knob rather than a lever on the inside, over a 1-3/8 inch to 2 inch door range.

The 460212 is a dummy, non-keyed set, so it has no latch and no cylinder. For an active door that has to lock, the Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is a keyed entrance set with a Grade 2 rating covering 1-3/8 inch to 1-3/4 inch doors - the same thickness range the Emtek 460212 fits. The Pamex FS7P31 Lexington single cylinder handleset is another keyed entry option over that same 1-3/8 inch to 1-3/4 inch range. The Weslock 2810 Hillcrest single cylinder handleset with Hudson knob is the keyed counterpart within the same family as the dummy Weslock 2815.

The Emtek 460212 tops out at 1-3/4 inch. For thicker slabs, the Weslock 1411 Traditionale Colonial handleset with Eleganti knob is a single cylinder set rated 1-3/4 inch to 2-1/4 inch, and the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset also covers 1-3/4 inch to 2-1/4 inch. The Weslock 2815 Hillcrest dummy handleset reaches 2 inch while staying on the dummy function the Emtek 460212 uses.

5-1/2 inches center to center. That's the spacing between the upper grip mounting point and the lower trim, and it's the number to check if you're replacing an existing sectional handleset and hoping to reuse the holes in the door face.

It's a residential handleset. The Wrought Steel collection is styled for residential entries in a rustic register, and the 460212 is catalogued as residential rather than commercial. For a commercial opening in a rated or high traffic doorway, look at a Grade 2 residential-plus option like the Schlage F Series F60 Addison or the Master Lock HDLB Series handleset instead.

Two other dummy handlesets to consider: the Weslock 2815 Hillcrest with the New Heaven lever and the Weslock 6695 Belmont with the Impresa knob. Both are listed for 1-3/8 to 2 inch doors, so they reach thicker slabs than the Emtek's 1-3/8 to 1-3/4 inch range if your door is over 1-3/4.

That's the usual use. Order the 460212 in the same finish, Flat Black Steel or Satin Steel, with the same interior lever or knob style you specified on the active leaf, and the pair reads as one set. The dummy carries no bolt, so all the locking sits on the active door.

The Emtek 460212 is a dummy set with no latch and no bolt, so it cannot secure an opening on its own. The Schlage Residential JI18/19 interconnected passage lock with keyed deadbolt and Torino lever combines a passage latch with a keyed deadbolt in one interconnected assembly, Grade 2, for 1-3/8 inch to 1-3/4 inch doors - the same thickness range the Emtek 460212 fits. The Master Lock HDLB series single cylinder deadbolt handleset is a Grade 2 grip-and-deadbolt set for the same purpose.

The Emtek 460212 is a mechanical, non-electronic set with no keypad and no cylinder. For keypad access with a matching grip, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs a Halifax lever interior with a contemporary SmartCode electronic deadbolt on a 1-3/4 inch door. The Yale Real Living BYRD226CBARX Assure Lock adds Wi-Fi and Bluetooth with a Ridgefield handleset over 1-3/4 inch to 2-1/4 inch, and the BYRD256 CBARX is the key-free touchscreen version with a Ridgefield passage handleset and trim over that same range.

They prep the door differently. The Emtek 460212 is a tubular lock type on a 5-1/2 inch center-to-center grip, surface mounted with no door prep. The Baldwin Estates 6542 Tremont entry mortise trim comes in single cylinder and double cylinder versions and is mortise trim for a 1-3/4 inch door, which means a mortise pocket in the edge of the slab. Substituting one for the other changes the door machining, so the choice is set by what the door already has.

The Emtek 460212 is the Wrought Steel collection in a steel substrate, offered in Flat Black Steel and Satin Steel. For a solid brass grip instead, Deltana lists the 803871B Hanover, 815871 St. Ann and 825871 Kingston handlesets, all solid brass in entry function. The Deltana 810871 Montego handleset is the wider-fitting one of the group at 1-3/8 inch to 2 inch door thickness, against 1-3/8 inch to 1-3/4 inch on the Emtek 460212.

The Emtek 460212 is sold as a complete set and takes any Wrought Steel knob or lever for the inside trim, with handing required if a lever is chosen. Baldwin ships the pairing as a fixed combination: the Wesley handleset comes matched to an Alcott knob or to a Carnaby knob, both entrance function. The Weslock 6695 Belmont dummy handleset arrives matched to an Impresa knob, and unlike the Baldwin Wesley sets it is dummy function like the Emtek 460212 rather than an entrance lock.

Only if no interior trim is wanted. The Emtek 460212 ships as a complete set and requires an inside knob or lever to be selected with it. The Kwikset 687AMD Amador and 687BW Belleview single cylinder handlesets are exterior only, Grade 3 entrance function for 1-3/4 inch doors, so the inside of the door has to be handled separately. The Amador is offered as 687AMD SMT with SmartKey and as 687AMD SMC with the SC1 keyway, which matters if the door is being keyed into an existing Schlage-keyed set.