Emtek 460232 Sectional with Normandy Grip Entrance Handleset - Wrought Steel Tubular - Dummy

Dummy only. The 460232 Normandy grip handleset has no latch and no cylinder, so it doesn't operate or lock anything. It's surface mounted trim for a fixed inactive leaf, a false door, or the dead half of a double door where you just need a grip to pull on. If you need the door to latch and key, order the entrance version of the same grip instead.

Yes, the 460232 covers 1-3/8 inch through 1-3/4 inch doors, which spans the common older interior thickness and the standard 1-3/4 inch exterior door. There's also a door thickness field on the order form, so state the actual measured thickness of your slab when you order.

No prep. It's surface mount, so there's no cross bore, no latch bore and no edge mortise to cut. That's what makes it the practical choice on a slab that's already hung, or on a door you don't want to drill. Mounting is on 5-1/2 inch center-to-center between the grip fixings, so an existing set at a different spread will leave holes showing.

Because of the inside trim. The 460232 is sold as a complete set with an interior knob or lever, and Emtek calls for handing whenever a lever is used inside so it swings the right way for your door. Right hand and left hand are both offered. Stand outside the door: if the hinges are on your right, it's right hand.

The Emtek 460232 stops at 1-3/4 inches. For a thicker slab, the Weslock 2815 Hillcrest dummy handleset with New Heaven lever and the Weslock 6695 Belmont dummy handleset with Impresa knob both cover 1-3/8 to 2 inches. Both are dummy function, same as the Emtek, so they suit the same inactive leaf or false door application.

Among the handleset alternatives, the Schlage Residential F60 Addison keyed entry with Accent lever and the Schlage Residential JE285 Barcelona with Seville lever are both Grade 2 for 1-3/8 inch to 1-3/4 inch doors, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is Grade 2 in the HDLB Series, and the Kwikset 687BW Belleview is Grade 3 for 1-3/4 inch doors. The Emtek 460232 is a residential dummy handleset.

The Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever is the nearest match on function: it is a dummy handleset, the same function the Emtek 460232 carries, so it mounts as a pull with no latch or bore operation. The Weslock 2815 covers a 1-3/8 inch to 2 inch door thickness range against the 1-3/8 inch to 1-3/4 inch range on the 460232. Both are handlesets with lever inside trim, where the Emtek pairs the Normandy grip with a choice of Wrought Steel knob or lever.

A dummy set will not secure a door; the Emtek 460232 is dummy function and non-keyed. For a keyed opening in the same 1-3/8 inch to 1-3/4 inch door thickness band, the Schlage Residential F60 Addison Single Cylinder Keyed Entry Handleset with Accent Lever is a Grade 2 entrance-function set, and the Pamex FS7P31 Lexington Single Cylinder Handleset is an entry-function set covering the same 1-3/8 inch to 1-3/4 inch range. For a thicker door, the Weslock 2810 Hillcrest Single Cylinder Handleset with Hudson Knob runs 1-3/8 inch to 2 inch.

The Emtek 460232 is built for 1-3/8 inch to 1-3/4 inch doors. For a 2 inch door, the Deltana 810871 Montego Handleset covers 1-3/8 inch to 2 inch, and in dummy function the Weslock 2815 Hillcrest and Weslock 6695 Belmont both run 1-3/8 inch to 2 inch. Thicker still, the Weslock 1411 Traditionale Colonial Handleset with Eleganti Knob is a single cylinder set for 1-3/4 inch to 2-1/4 inch doors.

The interior trim is included, but you pick it: Lafayette, Normandy or San Carlos lever, or Jamestown, Savannah, Madison Black or Madison Ivory knob. You also pick handing, and you can enter a door thickness and a split finish if you want the inside a different finish from the outside. Nothing further is required to complete the job since there's no latch or strike to buy.

On a pair of doors the usual setup is a keyed entrance handleset on the active leaf and a dummy like the 460232 on the inactive leaf, so both sides look identical from the street. Keep the grip style and finish the same across the two. If you want a keyed set from another brand instead, the Deltana Hanover, St. Ann and Kingston solid brass handlesets are all entry function, and Baldwin's Wesley handleset comes with either an Alcott or Carnaby knob.

The Weslock 6695 Belmont Dummy Handleset with Impresa Knob is a dummy-function handleset supplied with knob inside trim, rated for 1-3/8 inch to 2 inch doors. The Emtek 460232 also reaches knob trim: it is ordered with any Wrought Steel knob or lever for the inside, including the Jamestown, Savannah, Madison Black and Madison Ivory knobs, and handing is only required when a lever is used inside.

The Schlage Residential JI18/19 is an interconnected passage lock with keyed deadbolt and Torino lever, Grade 2, JI Series, for 1-3/8 inch to 1-3/4 inch doors - it retracts latch and deadbolt in one motion and needs the full interconnected door prep. The Emtek 460232 is a dummy handleset that surface mounts with no door prep required, so it is the choice only where the door does not latch. The two share the 1-3/8 inch to 1-3/4 inch door thickness range.

They do not. The Emtek 460232 is a non-electronic dummy handleset. The Yale Real Living BYRD226CBARX Assure Lock pairs a Wi-Fi and Bluetooth touchscreen deadbolt with a Ridgefield handleset for 1-3/4 inch to 2-1/4 inch doors, and the Kwikset 815SCEHFL-CP913CNT San Clemente handleset carries a Contemporary SmartCode electronic deadbolt on a 1-3/4 inch door. Both are powered deadbolt assemblies on a thicker door range; the 460232 is a surface mount pull requiring no door prep.

Not directly. The Kwikset 687AMD SMT Amador is an exterior-only single cylinder keyed entry handleset, Grade 3, for 1-3/4 inch doors, and its SC1 keyway sibling is the 687AMD SMC. Exterior-only means no inside trim ships with it, while the Emtek 460232 is sold as a complete set with the inside knob or lever included. For a matching non-operating pull, stay on dummy function such as the Weslock 2815 Hillcrest.

They solve different openings. The Baldwin Estates 6542 Tremont is entry-function mortise trim for a 1-3/4 inch door, available single cylinder as the 6542ENTR or double cylinder as the 6542DBLC, and it dresses a mortise lock body already in the door. The Emtek 460232 is a tubular handleset that mounts to the surface with no door prep required and carries dummy function. Choose the Baldwin where the door is prepped for a mortise case, the Emtek where you want a full grip set on an unprepped or non-latching door.

Two: Flat Black Steel (FBS) and Satin Steel (SWS). Both are from Emtek's Wrought Steel collection, so they'll sit alongside other Wrought Steel knobs and levers on the rest of the openings without a finish mismatch. If you want the interior trim in the other finish, use the split finish option.

Steel, from Emtek's Wrought Steel collection, with the brass base material noted in the spec. It's the rustic, forged look rather than a cast brass Colonial grip. Since it's a dummy with no working parts, the finish is the only thing exposed to weather.

Deltana offers several entry-function solid brass handlesets: the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston. All three are entry function, where the Emtek 460232 is dummy. The Emtek's own material is brass, in the Wrought Steel collection with a 5-1/2 inch center-to-center grip, offered in Flat Black Steel and Satin Steel.

The Baldwin Wesley Handleset is offered in entrance function with two interior knob pairings, the Alcott knob as 180WYHXATK and the Carnaby knob as 180WYHXCYK. The Emtek 460232 reaches the same idea from a dummy function base, pairing the Normandy grip with Jamestown, Savannah, Madison Black or Madison Ivory knobs, or with Lafayette, Normandy or San Carlos levers.