Emtek 4711 Ribbon & Reed Singl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$583.00
$466.40
Emtek Emtek 4711 Ribbon & Reed Single Cylinder Entrance Handleset - Brass Tubular EMTEK-4711

Emtek 4711 Ribbon & Reed Single Cylinder Entrance Handleset - Brass Tubular

(No reviews yet) Write a Review

Model: 4711-US26
From the Brass Collection
$583.00
$466.40
Selected Finish is
Selected Knob or Lever Style for Inside Trim is
Selected Handing is
Selected Backset is
Selected FREE KEYING Options is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$583.00
$466.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 4711 Ribbon & Reed Single Cylinder Entrance Handleset - Brass Tubular

  • Can be ordered with any Brass Knob or Lever for the inside trim
  • Sold as a complete set. Includes Latch and Strike Plate
  • Standard 2-1/8" Door Prep. Door Prep 5-1/2" Center-to-Center
  • Schlage C Keyway
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
  • Handing required if Lever used on inside or if Interconnect device is specified

 

Weiser® (WR5) Keyway

Specify by adding "W" to the beginning of Product Code for Weiser (WR5) Keyway.
No upcharge for cylinder substitution. Can be keyed into existing Weiser system.

 

 

Specifications:

  • Backset: 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 2"
  • Keyway: Schlage C
  • Handing: Required – specify left or right

Product Specs

Subcategory:
Handlesets
Collection:
Brass
Product Type:
Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Keyed Function:
Single Cylinder
Commercial/Residential:
Residential
Lock Type:
Tubular
Keyed:
Yes
Lock Function:
Entry
Series:
Orleans
Theme:
American Designer
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
4711
(CTC) Center-to-Center:
5-1/2"
Product Function:
Entry
Product Style:
American Designer
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 4711-US26 – Frequently Asked Questions

1) Do I have to specify handing on an Emtek 4711 entrance handleset?
Handing is a required choice, right hand or left hand, when you order the 4711. It matters most if you pick a lever for the inside trim or specify an interconnect device, since those are directional. Stand outside the door: the side the hinges are on is the hand.
2) Can I key an Emtek 4711 handleset into my existing Schlage or Weiser keys?
The 4711 ships standard with a Schlage C keyway, so it can be keyed into an existing Schlage C system. A Weiser WR5 cylinder is also offered and can be keyed into an existing Weiser system with no upcharge for the substitution. Keyed alike and keyed different are both available, and you can supply a key code if you are matching a system already in the building.
3) What is included with the Emtek 4711 handleset, and do I need to buy the interior knob separately?
The 4711 is sold as a complete set with the latch and strike plate included. The interior trim is not preselected: you choose the knob or lever when ordering, from the full Emtek brass range, including the matching Ribbon & Reed Knob (RBK) or Ribbon & Reed Lever (RBL) if you want the exterior pattern carried through to the inside. Nothing else is required to hang it on a properly bored door.
4) Which entry handleset works on a 2-1/4 inch thick door instead of the Emtek 4711?
The Emtek 4711 covers doors from 1-3/8 inch to 2 inch. For a thicker door, the Weslock 1411 Traditionale Colonial handleset with Eleganti knob is a single cylinder keyed entry rated for 1-3/4 inch to 2-1/4 inch doors. Among the electronic options, the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset also covers 1-3/4 inch to 2-1/4 inch.
5) Is there a keypad or smart handleset alternative to the Emtek 4711?
The Emtek 4711 is a mechanical, non-electronic keyed handleset. For a keypad opening, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs a Halifax lever interior with a contemporary SmartCode keypad electronic deadbolt on 1-3/4 inch doors. The Yale Real Living BYRD226CBARX Assure Lock adds Wi-Fi and Bluetooth with the Ridgefield handleset, and the BYRD256 CBARX is a key free touchscreen version with a Ridgefield passage handleset.
6) What is the closest solid brass alternative to the Emtek 4711 Ribbon and Reed entrance handleset?
The Deltana 815871 St. Ann handleset and the Deltana 825871 Kingston handleset are both solid brass entry handlesets, as is the Deltana 803871B Hanover. All three carry the entry function, matching the Emtek 4711, which is a single cylinder entrance handleset built in brass with an entry lock function. The difference is the exterior styling and the interior trim program: the 4711 pairs with Emtek brass knobs and levers for the inside trim, while each Deltana handleset comes as its own fixed style.
7) What is a Grade 2 or Grade 3 handleset option compared with the Emtek 4711?
The Emtek 4711 is a residential brass tubular entrance handleset. Where a stated grade is wanted, the Schlage Residential F60 Addison keyed entry handleset with Accent lever is Grade 2 for 1-3/8 inch to 1-3/4 inch doors, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is Grade 2, and the Kwikset 687AMD Amador single cylinder handleset is Grade 3 for 1-3/4 inch doors.
8) What should I order if the door needs a mortise entrance trim rather than a tubular handleset?
The Emtek 4711 is a tubular lockset using a 2-1/8 inch cross bore and a 5-1/2 inch center-to-center door prep. A door already prepped for a mortise lock takes the Baldwin Estates 6542 Tremont entry mortise trim instead, offered in a single cylinder version and a double cylinder version, both for 1-3/4 inch doors.
9) If I want to key the new handleset into an existing SmartKey system, is the Emtek 4711 the right choice?
The Emtek 4711 uses a Schlage C keyway as standard, with a Weiser WR5 cylinder available by adding W to the product code so it can be keyed into an existing Weiser system. For a SmartKey system, the Kwikset 687AMD Amador and Kwikset 687BW Belleview single cylinder handlesets are built around SmartKey, and the 687AMD SMC pairs SmartKey with an SC1 keyway.
10) Single cylinder or double cylinder for a front door with glass next to it?
The 4711 is a single cylinder entrance handleset: key outside, thumbturn inside. That is the right choice for a solid door, and it is what most residential codes want because you can get out without a key. If you have glass within reach of the deadbolt and want key-both-sides, look at a double cylinder trim instead, such as the Baldwin Estates 6542 Tremont double cylinder entry mortise trim.
11) Is the Emtek 4711 a tubular or a mortise handleset, and does that matter for my door?
Tubular. It uses the standard 2-1/8 inch cross bore prep rather than a routed mortise pocket, which means a normally bored door takes it with no pocket cut. A mortise handleset needs a milled edge pocket in the door stile, so it is a different install entirely. If your door is already mortised, the 4711 is not the swap.
12) Is the Emtek 4711 handleset suitable for a commercial building entrance?
It is a residential handleset in solid brass, aimed at house and unit front doors. For a commercial opening with code-driven hardware requirements, a graded lockset is the right direction. Among the graded residential handlesets, the Schlage Residential F60 Addison is listed Grade 2, as is the Master Lock HDLB Series single cylinder deadbolt handleset.
13) How is the Emtek 4711 different from a Kwikset or Schlage residential handleset?
Two practical differences. The 4711 is solid brass with the Ribbon & Reed pattern and lets you pick the interior knob or lever from roughly ninety Emtek styles, where the mass-market sets pair a fixed exterior with one or two interior trims, like the Schlage F60 Addison with the Accent lever or the Kwikset 687 Amador. It also spans 1-3/8 to 2 inch doors, while the Kwikset 687 Amador and Belleview are listed at 1-3/4 inch and the Schlage F Series at 1-3/8 to 1-3/4 inch. The Kwikset sets use SmartKey; the Emtek uses a standard Schlage C or Weiser WR5 cylinder.
14) Everything I need to specify when ordering an Emtek 4711 handleset?
Five choices. Finish, one of seven. Cylinder keyway, Schlage C standard or Weiser WR5. Interior knob or lever style from the Emtek brass range. Handing, right or left. Backset, 2-3/8 or 2-3/4 inch to match your existing bore. Keying is free, either keyed alike across multiple doors or keyed different, and you can pass a key code if you are matching an existing system.
15) I only need the exterior handleset because the interior trim is staying. What are my options versus the Emtek 4711?
The Emtek 4711 is sold as a complete set including latch and strike plate, and the inside knob or lever is specified with the order. When only the exterior half is wanted, the Kwikset 687AMD Amador single cylinder handleset and the Kwikset 687BW Belleview single cylinder handleset are both supplied exterior only, Grade 3, for 1-3/4 inch doors. The 687AMD SMC version carries an SC1 keyway with SmartKey.
16) Which handlesets besides the Emtek 4711 fit the same 1-3/8 inch to 2 inch door thickness range?
The Emtek 4711 covers 1-3/8 inch to 2 inch doors. The Deltana 810871 Montego handleset covers the identical 1-3/8 inch to 2 inch range, as do the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob and the Weslock 6695 Belmont dummy handleset. Of those, the Weslock 2810 is the single cylinder keyed one, matching the 4711 function.
17) What handleset comes with a matching interior knob already selected instead of choosing trim like the Emtek 4711?
The Emtek 4711 requires the inside knob or lever to be chosen at order, drawing from the Emtek brass trim range. Handlesets that arrive as a fixed pairing include the Baldwin Wesley handleset with Alcott knob and the Baldwin Wesley handleset with Carnaby knob, both entrance function, and the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob.
18) What finishes does the Emtek 4711 Ribbon & Reed handleset come in, and can I match other doors in the building?
Seven finishes: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), and French Antique (US7). Every one of them is offered with either the Schlage or the Weiser cylinder. Since the interior trim is picked from the Emtek brass knob and lever range in the same finish family, you can standardize a whole run of doors on one look.
19) I need a matching handleset on a door that does not lock. Can I order the 4711 as a dummy?
The 4711 is a keyed entrance function only, so it is not a dummy. For a fixed inactive leaf or a French door slave, the Weslock 6695 Belmont dummy handleset with Impresa knob and the Weslock 2815 Hillcrest dummy with New Heaven lever are both dummy handlesets, each listed for 1-3/8 to 2 inch doors, the same thickness range as the 4711. Another route on a non-keyed opening is the Schlage JE285 Barcelona handleset with Seville lever, a non-keyed entry function.
How fast can I get the Emtek 4711-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 4711-US26 come with a warranty?
Absolutely. The Emtek 4711-US26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 4711-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 4711-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!