Emtek 4727 Transitional Herita...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$583.00
$466.40
Emtek Emtek 4727 Transitional Heritage Monolithic Double Cylinder Entrance Handleset - Brass Tubular EMTEK-4727

Emtek 4727 Transitional Heritage Monolithic Double Cylinder Entrance Handleset - Brass Tubular

(No reviews yet) Write a Review

Model: 4727-US19
From the Brass Collection
$583.00
$466.40
Selected Finish is
Selected Knob or Lever Style for Inside Trim is
Selected Handing is
Selected Backset is
Selected FREE KEYING Options is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$583.00
$466.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 4727 Transitional Heritage Monolithic Double Cylinder Entrance Handleset - Brass Tubular

  • Can be ordered with any Brass Knob or Lever for the inside trim
  • Sold as a complete set. Includes Latch and Strike Plate
  • Standard 2-1/8" Door Prep. Door Prep 5-1/2" Center-to-Center
  • Schlage C Keyway
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
  • Handing required if Lever used on inside

Weiser® (WR5) Keyway

Specify by adding "W" to the beginning of Product Code for Weiser (WR5) Keyway.
No upcharge for cylinder substitution. Can be keyed into existing Weiser system.

 

 

Specifications:

  • Backset: 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 2"
  • Keyway: Schlage C
  • Handing: Required – specify left or right

Product Specs

Subcategory:
Handlesets
Collection:
Brass
Product Type:
Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Keyed Function:
Double Cylinder
Commercial/Residential:
Residential
Lock Type:
Tubular
Keyed:
Yes
Lock Function:
Entry
Series:
Transitional Heritage
Theme:
Contemporary
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
4727
(CTC) Center-to-Center:
5-1/2"
Product Function:
Double Cylinder
Product Style:
Transitional Heritage
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 4727-US19 – Frequently Asked Questions

1) Will the Emtek 4727 handleset fit my existing door prep?
The 4727 Transitional Heritage handleset uses standard bored prep: a 2-1/8 inch cross bore and 5-1/2 inch center-to-center spacing between the handle cylinder and the interior trim. Door thickness range is 1-3/8 to 2 inches, which covers standard 1-3/4 inch entry doors and thicker slabs. If your existing handleset was also 5-1/2 inch CTC with a 2-1/8 inch bore, it drops in.
2) What backset does the Emtek 4727 come with, and can I get 2-3/4 inch?
Both are offered. The latch shipped as standard is 2-3/8 inch backset, and 2-3/4 inch is a selectable option at ordering. Measure from the door edge to the center of the bore before you order; on a 2-3/8 prep a 2-3/4 latch will not line up.
3) Do I have to specify handing on the Emtek 4727 entrance handleset?
Handing is required, left or right, and it is a required selection at ordering. It matters specifically when you choose a lever for the inside trim, since a lever has to point the correct way relative to the hinge side. Stand outside the door: if the hinges are on your right, it is right hand.
4) What does double cylinder mean on this Emtek entry handleset, and should I use it?
Double cylinder means the 4727 is keyed on both sides, so it takes a key to operate from the inside as well as the outside. That is the choice people make for doors with glass next to or in the slab, where someone could reach through and turn a thumbturn. The trade-off is egress: no key in the door means nobody gets out fast in a fire, and some local codes restrict double cylinder on a dwelling exit door. If that is a concern, order a single cylinder version with an interior thumbturn instead.
5) What is a comparable double cylinder entry handleset if the Emtek 4727 style does not suit the door?
The Baldwin Estates 6542 Tremont double cylinder entry trim is the closest double-keyed alternative, but the two are not interchangeable preps. The Emtek 4727 is a tubular lockset with a 2-1/8 inch cross bore, 5-1/2 inch center-to-center handle prep, and a 1-3/8 to 2 inch door thickness range. The Baldwin 6542DBLC is mortise trim listed for a 1-3/4 inch door, so it needs a mortise pocket rather than a bored door. Confirm which prep the door already carries before choosing.
6) Which handlesets besides the Emtek 4727 fit a door between 1-3/8 and 2 inches thick?
The Emtek 4727 covers 1-3/8 inch to 2 inch doors. Peers with the same published range are the Deltana 810871 Montego handleset, the Weslock 2810 Hillcrest single cylinder with Hudson knob, the Weslock 2815 Hillcrest dummy, and the Weslock 6695 Belmont dummy. If the door is a full 1-3/4 inch only, the Baldwin 6542 Tremont trims and the Kwikset 687 Amador and Belleview exteriors are listed at that thickness. Thicker slabs from 1-3/4 to 2-1/4 inch are served by the Weslock 1411 Traditionale Colonial.
7) Is there an electronic handleset alternative to the Emtek 4727 for a rental we manage remotely?
The Emtek 4727 is a mechanical key-operated set with no electronic component. For keypad or app control, the Kwikset 815SCEHFL-CP913CNT San Clemente pairs a handleset with a SmartCode keypad electronic deadbolt on a 1-3/4 inch door, and the Yale Real Living Assure line offers the BYRD226CBARX Wi-Fi and Bluetooth touchscreen deadbolt with Ridgefield handleset, the BYRD226NRRX standalone touchscreen version, and key-free BYRD256 CBARX, all listed for 1-3/4 to 2-1/4 inch doors.
8) What looks like a substitute for the Emtek 4727 but will not lock the door?
Several handlesets share the same overall appearance without any keyed function. The Weslock 6695 Belmont with Impresa knob and the Weslock 2815 Hillcrest with New Heaven lever are dummy handlesets with no latch or cylinder, intended for an inactive leaf. The Schlage Residential JE285 Barcelona with Seville lever is a non-keyed entry handleset. The Emtek 4727 is keyed on both faces and includes the latch and strike plate as a complete set, so none of those three will replace it on an active exterior door.
9) I need a keyed entry handleset but only want a key on the outside - what should I order instead of the Emtek 4727?
The 4727 is a double cylinder set, meaning it is keyed on both the exterior and the interior. If you want a thumbturn inside instead, single cylinder handlesets include the Baldwin Estates 6542 Tremont single cylinder entry mortise trim, the Schlage Residential F60 Addison with Accent lever, and the Weslock 2810 Hillcrest with Hudson knob. Double cylinder sets are restricted by code in some jurisdictions on egress doors, so verify local requirements before specifying either function.
10) We key everything to a Kwikset SmartKey system - is the Emtek 4727 the right choice?
The Emtek 4727 ships with a Schlage C keyway as standard, with a Weiser WR5 cylinder available at no upcharge so it can be keyed into an existing Weiser system. It is not a SmartKey product. If SmartKey rekeyable cylinders are the standard across the property, the Kwikset 687AMD Amador and 687BW Belleview single cylinder handleset exteriors are SmartKey sets, and the 687AMD SMC version carries an SC1 keyway with SmartKey. Note those Kwikset exteriors are single cylinder rather than double.
11) Does the Emtek 4727 carry an ANSI grade, and which comparable handlesets do?
The Emtek 4727 is specified for residential use. If a graded product is required by the spec, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is Grade 2, the Schlage Residential F60 Addison and JE285 Barcelona are Grade 2, and the Kwikset 687AMD Amador and 687BW Belleview exteriors are Grade 3.
12) Can I order several Emtek 4727 handlesets keyed alike for a building or a rental?
Yes. Keyed alike and keyed different are both selectable at no charge, and there is a keying to code field if you need them cut to an existing code so one key runs the whole set. With the Schlage C cylinder you can fold them into an existing Schlage system, or switch to the Weiser WR5 cylinder to match a Weiser system already in place.
13) What comes in the box with the Emtek 4727 handleset?
It ships as a complete set: exterior handle with cylinder, the interior trim you select, latch, and strike plate. You still have to pick the inside knob or lever style, handing, backset, and keying when ordering, since none of those is a default.
14) Can I pick which knob or lever goes on the inside of this Emtek handleset?
Yes, and you have to. The 4727 accepts any Emtek brass knob or lever for the interior trim, and the selection is required at ordering. The range runs from contemporary bar and knurled designs like the L-Square, T-Bar and R-Bar families and the Ace Knurled Knob, through traditional levers such as Rope, Ribbon and Reed and Santa Fe, to crystal options like Georgetown, Windsor and Old Town. There is also an optional split finish field if you want the interior a different finish from the exterior handle.
15) Is the Emtek 4727 rated for commercial use?
It is a residential product. For a commercial opening that needs a graded lock, look at handlesets carrying an ANSI grade, such as the Grade 2 Schlage Residential F60 Addison or the Grade 2 Master Lock HDLB Series single cylinder deadbolt handleset.
16) What solid brass handlesets compare to the Emtek 4727 if I want a different exterior style?
The Emtek 4727 Transitional Heritage is a brass tubular handleset with a 5-1/2 inch center-to-center prep. Other solid brass entry handlesets include the Deltana 803871B Hanover, 815871 St. Ann, and 825871 Kingston, all entry function, plus the Deltana 810871 Montego. Emtek differs in that the inside trim is selected separately from its knob and lever range, so the exterior grip and the interior trim can be specified independently.
17) I have to specify backset before ordering the Emtek 4727 - is there a handleset that avoids that decision?
The Emtek 4727 ships with a 2-3/8 inch backset latch as standard and requires you to specify 2-3/4 inch if the bore is set back further, and handing must be given if a lever is used inside. The Sure-Loc handlesets - Aspen AN507, Alta AT507, Coral CR507, and Madison MA507 - are all built with an adjustable backset, which removes that ordering step when the existing bore has not been measured.
18) Can I use a Kwikset 687 Amador in place of the Emtek 4727 to save on a rear entry door?
Only if the door already has an interior lock. The Kwikset 687AMD Amador and 687BW Belleview are exterior-only single cylinder handsets, so interior trim is not included, and they are listed for a 1-3/4 inch door. The Emtek 4727 is sold as a complete set including latch and strike plate, is double keyed, and covers 1-3/8 to 2 inch doors with the inside knob or lever selected as part of the order.
19) Is a Schlage JI18/19 interconnected lock an alternative to the Emtek 4727 double cylinder handleset?
They solve different problems. The Schlage Residential JI18/19 is an interconnected passage lock with a keyed deadbolt and Torino lever, Grade 2, for 1-3/8 to 1-3/4 inch doors, where the lever is passage and the deadbolt does the locking. The Emtek 4727 is a double cylinder handleset with a key on both faces and a 5-1/2 inch center-to-center grip prep. Choose the interconnected set for single-motion egress on an apartment entry, and the 4727 where a keyed thumb-piece handleset is wanted.
20) What finishes does the Emtek 4727 Transitional Heritage handleset come in?
Seven: Oil Rubbed Bronze (US10B), Lifetime Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL) and Satin Brass (US4). Every one of them is offered with either the Schlage or the Weiser cylinder. Unlacquered brass is the one to know about: it has no clear coat, so it will darken and patina with handling rather than staying bright.
21) Is this Emtek handleset solid brass or plated?
The 4727 is solid brass, both material and substrate, and it sits in Emtek's Brass collection. That is why the interior trim choices are restricted to brass knobs and levers rather than the bronze or stainless lines.
How fast can I get the Emtek 4727-US19 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 4727-US19 come with a warranty?
Absolutely. The Emtek 4727-US19 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 4727-US19?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 4727-US19 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!