Emtek 4812 Arts & Crafts Full ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$684.00
$547.20
Emtek Emtek 4812 Arts & Crafts Full Length Single Cylinder Entrance Handleset - Brass Tubular EMTEK-4812

Emtek 4812 Arts & Crafts Full Length Single Cylinder Entrance Handleset - Brass Tubular

(No reviews yet) Write a Review

Model: 4812-US15
From the Brass Collection
$684.00
$547.20
Selected Finish is
Selected Knob or Lever Style for Inside Trim is
Selected Handing is
Selected Backset is
Selected FREE KEYING Options is
  • Emtek Emtek 443 Interconnect Device EMTEK-443

In Stock (leaves warehouse same day if ordered before 3pm ET)

$684.00
$547.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 4812 Arts and Crafts Full Length Single Cylinder Entrance Handleset - Brass Tubular

  • Can be ordered with any Brass Knob or Lever for the inside trim
  • Sold as a complete set. Includes Latch and Strike Plate
  • Standard 2-1/8" Door Prep. Door Prep 5-1/2" Center-to-Center
  • Schlage C Keyway
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
  • Handing required if Lever used on inside or if Interconnect device is specified

Weiser® (WR5) Keyway

Specify by adding "W" to the beginning of Product Code for Weiser (WR5) Keyway.
No upcharge for cylinder substitution. Can be keyed into existing Weiser system.

 

 

Specifications:

  • Backset: 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 2"
  • Keyway: Schlage C
  • Handing: Required – specify left or right

Product Specs

Subcategory:
Handlesets
Collection:
Brass
Product Type:
Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Keyed Function:
Single Cylinder
Commercial/Residential:
Residential
Lock Type:
Tubular
Keyed:
Yes
Lock Function:
Entry
Series:
Arts & Crafts
Theme:
Arts & Crafts
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
4812
(CTC) Center-to-Center:
5-1/2"
Product Function:
Entry
Product Style:
Arts & Crafts
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 4812-US15 – Frequently Asked Questions

1) What do I have to specify when ordering an Emtek 4812 handleset?
Four things get specified on the 4812. Handing (right or left), backset (2-3/8 inch is standard, 2-3/4 inch if your existing bore sits further off the edge), the keyway (Schlage C standard or Weiser WR5), and the interior knob or lever, which is a required choice from Emtek's brass trim range. Keying is also set at order time, keyed different or keyed alike, and you can supply a key code. Exterior finish comes in Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), or Unlacquered Brass (US3NL).
2) Can the Emtek 4812 handleset be keyed into my existing Schlage or Weiser keys?
Yes on both. The 4812 ships with a Schlage C cylinder as standard, and a Weiser WR5 cylinder is available at no upcharge, which lets it key into an existing Weiser system. Give the key code at order time if you want it cut to an existing bitting, or order keyed alike if you are doing several openings on one key.
3) Do I need to know the handing for an Emtek 4812 entrance handleset?
Handing matters here. The 4812 requires left or right hand to be specified, and it becomes critical if you pick a lever for the inside trim or add the interconnect device, because those parts are handed. Stand outside the door: if the hinges are on your right, it is a right hand door.
4) What comes in the box with the Emtek 4812 handleset, and what else do I need to buy?
The 4812 is sold as a complete set with the latch and strike plate included. What you add is the interior trim, since the inside knob or lever is a required selection rather than a default, and optionally the Emtek 443 interconnect device if you want the deadbolt and the interior lever to retract together. You do not need to source a separate cylinder or latch.
5) My door has a 2-3/4 inch backset. Will the Emtek 4812 work, or do I need a different handleset?
It works, but you have to say so. The standard latch shipped with the 4812 is a 2-3/8 inch backset, and 2-3/4 inch is a specified option. Measure from the door edge to the center of the bore before ordering; those are the two backsets used on residential bored doors and getting it wrong means the latch will not reach the strike.
6) The opening needs to key from both sides. What is the double cylinder alternative to the Emtek 4812?
The Emtek 4812 Arts and Crafts is a single cylinder set, keyed outside with a thumbturn inside. Where the opening has glass near the lock and the code or the owner wants a key on both faces, the Baldwin Estates 6542 Tremont double cylinder entry mortise trim is the double cylinder counterpart to the Baldwin 6542 Tremont single cylinder entry mortise trim; both are entrance function and fit a 1-3/4 inch door. Note those Baldwin sets are mortise trim, so the door needs a mortise pocket rather than the 2-1/8 inch cross bore the 4812 uses.
7) The door is 2-1/4 inches thick. What entry handleset should I use instead of the Emtek 4812?
The Emtek 4812 Arts and Crafts handleset is built for doors 1-3/8 inch to 2 inch, so a 2-1/4 inch door falls outside it. The Weslock 1411 Traditionale Colonial handleset with Eleganti knob is a single cylinder keyed entry set with a 1-3/4 inch to 2-1/4 inch door thickness range. On the electronic side, the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset also covers 1-3/4 inch to 2-1/4 inch.
8) What is a comparable single cylinder entry handleset to the Emtek 4812 Arts and Crafts if I need one that fits a 1-3/8 inch door?
The Emtek 4812 Arts and Crafts handleset is an entry function single cylinder set that fits doors from 1-3/8 inch to 2 inch thick. Two peers cover that same thin-door starting point: the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob covers 1-3/8 inch to 2 inch, and the Deltana 810871 Montego handleset also lists 1-3/8 inch to 2 inch. The Pamex FS7P31 Lexington single cylinder handleset in satin nickel starts at 1-3/8 inch as well but tops out at 1-3/4 inch, so it suits a thin door but not a thick one.
9) I need an ANSI grade on the handleset for a spec. Which entry handlesets carry a stated grade?
The Emtek 4812 Arts and Crafts is a residential brass tubular entry handleset. Where a drawing calls out a grade, the Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is Grade 2 and fits 1-3/8 inch to 1-3/4 inch doors, and the Master Lock HDLBA0615/4D single cylinder deadbolt handleset in the HDLB series is also Grade 2. The Kwikset 687AMD Amador single cylinder handleset is Grade 3 and fits a 1-3/4 inch door.
10) Is the Kwikset 687AMD Amador handleset a drop-in replacement for an Emtek 4812?
No. The Emtek 4812 Arts and Crafts is a complete entry set that includes the latch and strike and takes a knob or lever for the inside trim. The Kwikset 687AMD Amador single cylinder handleset, in both the SmartKey 687AMD SMT and the SC1 keyway 687AMD SMC versions, is exterior trim only, so the interior side has to be sourced separately. It is Grade 3 and fits a 1-3/4 inch door, where the 4812 covers 1-3/8 inch to 2 inch.
11) Which handlesets look like the Emtek 4812 entry set but will not lock the door?
The Emtek 4812 Arts and Crafts is a keyed entry function set. Several handlesets share the look but not the function: the Weslock 6695 Belmont handleset with Impresa knob and the Weslock 2815 Hillcrest handleset with New Heaven lever are both dummy function, meaning fixed trim with no latch action, and the Schlage Residential JE285 Barcelona with Seville lever is a non-keyed entry handleset. Order those only where you want a fixed pull or an unkeyed opening.
12) Is the Emtek 4812 a mortise handleset or a tubular one, and which should I be using?
Tubular. The 4812 uses a bored tubular lock, meaning it installs into a standard 2-1/8 inch cross bore with a 5-1/2 inch center-to-center prep, no mortise pocket routed into the door edge. That is what you want on a typical residential entry door or a retrofit where the door already has a bored prep. A mortise handleset, like the Baldwin Estates 6542 Tremont trim, needs a mortise case pocket cut into the door edge and is the heavier-duty route on a thick or high-traffic entry.
13) I need matching hardware on several doors in a house. Can I mix trim styles across an Emtek 4812 order?
You can. The 4812 accepts any Emtek brass knob or lever for the interior, so the exterior handleset stays consistent on every door while the inside trim can vary room to room. There is also a split finish option if you want a different finish inside than out. Order the openings keyed alike to run the whole set on one key.
14) Is the Emtek 4812 handleset rated for a commercial entrance or is it residential?
Residential. The 4812 is a residential-classified brass handleset, so for a commercial opening on a spec sheet you would be looking elsewhere. Among Grade-rated handlesets, the Schlage Residential F60 Addison and the Master Lock HDLB Series are listed as Grade 2, and the Kwikset 687 Amador as Grade 3.
15) What else could I use instead of the Emtek 4812 on a 1-3/8 inch door?
The 4812 itself covers 1-3/8 inch, so it is a fit. If you want alternatives in that thickness band, the Deltana 810871 Montego handleset covers 1-3/8 to 2 inches, the Weslock 2810 Hillcrest single cylinder covers 1-3/8 to 2 inches, and the Pamex FS7P31 Lexington single cylinder covers 1-3/8 to 1-3/4 inches. Note the Kwikset 687 Amador and Baldwin Estates 6542 are listed at 1-3/4 inch only, so they will not suit a thinner slab.
16) I want a keypad or app-controlled handleset instead of a keyed one like the Emtek 4812. What are the options?
The Emtek 4812 Arts and Crafts is a mechanical, non-electronic single cylinder set. For an electronic opening, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset with Halifax lever pairs the handleset with a contemporary SmartCode keypad electronic deadbolt and ships with the RCAL latch and RCS strike for a 1-3/4 inch door. The Yale Real Living BYRD226CBARX Assure Lock pairs a Wi-Fi and Bluetooth touchscreen deadbolt with the Ridgefield handleset for 1-3/4 inch to 2-1/4 inch doors, and the BYRD226NRRX is the standalone version of the same handleset pairing.
17) What other solid brass entry handlesets are there besides the Emtek 4812 Arts and Crafts?
The Emtek 4812 Arts and Crafts handleset is brass throughout, both material and substrate. In solid brass, Deltana offers three entry function handlesets: the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston. All three are entry function solid brass handlesets, each in its own series, so the choice among them and the 4812 comes down to the escutcheon style you want on the door face.
18) I want the handleset and the interior knob to arrive matched as one part number instead of picking the inside trim. What should I order instead of the Emtek 4812?
The Emtek 4812 Arts and Crafts is ordered with the inside knob or lever chosen separately, from Arts and Crafts and Hammered levers through Egg, Melon, and crystal knobs. If you would rather order a fixed pairing, Baldwin sells the Wesley handleset as preset combinations: BAL-180WYHXATK is the Wesley handleset with Alcott knob and BAL-180WYHXCYK is the Wesley handleset with Carnaby knob, both entrance function. Weslock does the same with the 2810 Hillcrest single cylinder handleset with Hudson knob.
19) Can I use the Schlage JI18/19 interconnected lock in place of an Emtek 4812 entry handleset?
They solve different problems. The Emtek 4812 Arts and Crafts is an entry function handleset with a Schlage C keyway as standard and a Weiser WR5 option, and it accepts the Emtek 443 interconnect device when a single-motion egress lock is wanted. The Schlage Residential JI18/19 is an interconnected passage lock with a keyed deadbolt and Torino lever in satin stainless steel, Grade 2, for 1-3/8 inch to 1-3/4 inch doors. Its lever is passage function with the locking done by the separate deadbolt, and it is a lever set rather than a full length handleset, so the door face reads completely differently.
20) Is the Emtek 4812 handleset solid brass, and what finishes hold up outside?
Solid brass construction, both substrate and material. Finish choices are Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), and Unlacquered Brass (US3NL). Unlacquered brass is the living finish: it will patina with exposure rather than staying bright, which is often the point on an Arts and Crafts entry. The other three are coated finishes that hold their appearance.
How fast can I get the Emtek 4812-US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 4812-US15 come with a warranty?
Absolutely. The Emtek 4812-US15 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 4812-US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 4812-US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!