Emtek 4811 Arts & Crafts Singl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$583.00
$466.40
Emtek Emtek 4811 Arts & Crafts Single Cylinder Entrance Handleset - Brass Tubular EMTEK-4811

Emtek 4811 Arts & Crafts Single Cylinder Entrance Handleset - Brass Tubular

(1 review) Write a Review

Model: 4811-US15
From the Brass Collection
$583.00
$466.40
Selected Finish is
Selected Knob or Lever Style for Inside Trim is
Selected Handing is
Selected Backset is
Selected FREE KEYING Options is
  • Emtek Emtek 443 Interconnect Device EMTEK-443

In Stock (leaves warehouse same day if ordered before 3pm ET)

$583.00
$466.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 4811 Arts and Crafts Single Cylinder Entrance Handleset - Brass Tubular

  • Can be ordered with any Brass Knob or Lever for the inside trim
  • Sold as a complete set. Includes Latch and Strike Plate
  • Standard 2-1/8" Door Prep. Door Prep 5-1/2" Center-to-Center
  • Schlage C Keyway
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
  • Handing required if Lever used on inside or if Interconnect device is specified

Weiser® (WR5) Keyway

Specify by adding "W" to the beginning of Product Code for Weiser (WR5) Keyway.
No upcharge for cylinder substitution. Can be keyed into existing Weiser system.

 

 

Specifications:

  • Backset: 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 2"
  • Keyway: Schlage C
  • Handing: Required – specify left or right

Product Specs

Subcategory:
Handlesets
Collection:
Brass
Product Type:
Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Keyed Function:
Single Cylinder
Commercial/Residential:
Residential
Lock Type:
Tubular
Keyed:
Yes
Lock Function:
Entry
Series:
Arts & Crafts
Theme:
Arts & Crafts
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
4811
(CTC) Center-to-Center:
5-1/2"
Product Function:
Entry
Product Style:
Arts & Crafts
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 4811-US15 – Frequently Asked Questions

1) Will the Emtek 4811 Arts & Crafts handleset fit my door, and what door prep does it need?
The 4811 uses the standard 2-1/8 inch cross bore with 5-1/2 inch center-to-center between the handle bore and the deadbolt bore, and it covers doors from 1-3/8 to 2 inches thick. If your existing entry set was also 5-1/2 inch CTC on a 2-1/8 inch bore, it drops into the same holes. If your door is bored 5-1/2 inch CTC but has a different bore size, or the CTC is anything other than 5-1/2, the plate and bolt will not line up and the door needs re-prep.
2) What backset do I need to specify on the Emtek 4811 handleset?
Two backsets are offered on the 4811: 2-3/8 inch and 2-3/4 inch. The set ships with the 2-3/8 inch latch unless you call out 2-3/4. Measure from the door edge to the center of the bore. Most residential doors are 2-3/8, and thicker or wider commercial-style stiles usually run 2-3/4. Backset is a required selection on the order, so pick it before you buy rather than trying to correct it after.
3) Do I have to specify handing on the Emtek 4811, and how do I tell left from right?
Handing is required on the 4811 and both right hand and left hand are ordered choices. It matters in particular if you put a lever on the inside trim, or if you add the interconnect device, because both are directional. Stand outside the door: if the hinges are on your right, it is a right hand door. Get this wrong and the lever points the wrong way when the set arrives.
4) What keyway does the Emtek 4811 come with, and can it be keyed into my existing Weiser or Schlage keys?
Schlage C is the standard keyway on the 4811, and a Weiser WR5 cylinder is offered as a straight substitution with no upcharge. Order the Weiser version if the rest of the property runs Weiser and it can be keyed into that existing system. Keyed alike and keyed different are both selectable, and there is a field to key to a specific code if you are matching an existing key bitting. That is what makes this workable for a landlord or property manager keeping a building on one key.
5) What comes in the box with the Emtek 4811 handleset, and do I need to order the inside knob separately?
The 4811 ships as a complete set with the latch and strike plate included, but the interior trim is a required selection, not an extra. You choose one Emtek brass knob or lever for the inside: levers like the Arts & Crafts (AC), Hammered (HM), Stuttgart (STU) and Athena (ATH), knobs like the Ace (ACE), Spoke (SPK) and Round (ROU), and crystal options such as the Windsor (WS) and Bristol (BL). Split finish is available if you want a different finish inside than out. Nothing further is required to hang it beyond the strike prep already in the frame.
6) Can I replace a Kwikset or Schlage front door handleset with the Emtek 4811?
It depends on the door prep, not the brand. The 4811 wants a 2-1/8 inch cross bore at 5-1/2 inch center-to-center, which is the common residential handleset prep, so a set already using that layout swaps over. Where it beats the mass-market options is thickness range and keying: the 4811 covers 1-3/8 to 2 inches, while the Kwikset 687 Amador and 687 Belleview handlesets and the Yale Assure Ridgefield handlesets are listed at 1-3/4 inch and up. And since the 4811 can be ordered in Schlage C or Weiser WR5, you can keep the keys you already carry.
7) My door is 2-1/4 inches thick. What handleset should I use instead of the Emtek 4811?
The Emtek 4811 is built for doors 1-3/8 to 2 inches thick, so a 2-1/4 inch door is past its range. The Weslock 1411 Traditionale Colonial handleset with Eleganti knob is a single cylinder keyed entry set rated for 1-3/4 to 2-1/4 inch doors. Among the Yale Real Living sets, the BYRD226CBARX and BYRD226NRRX Assure Lock touchscreen deadbolts with Ridgefield handleset also cover 1-3/4 to 2-1/4 inch doors, and the BYRD256CBARX Assure Lock 2 covers 1-3/8 to 2-1/4 inch. Note that the Yale sets are electronic touchscreen deadbolt handlesets, while the 4811 is a non-electronic keyed set.
8) What is the closest equivalent to the Emtek 4811 Arts and Crafts handleset if I need a solid brass entry handleset from another brand?
The Emtek 4811 is a solid brass tubular entry handleset in the Arts and Crafts style with a 5-1/2 inch center-to-center handle and a 1-3/8 to 2 inch door thickness range. The nearest solid brass peers are the Deltana Hanover 803871B, the Deltana St. Ann 815871, and the Deltana Kingston 825871, all listed as entry-function solid brass handlesets. The Deltana Montego 810871 covers the same 1-3/8 to 2 inch door thickness range as the 4811, so it fits the same door stock. The practical difference is the interior trim: the 4811 is ordered with a separately specified Emtek brass knob or lever, while the Deltana sets carry their own series trim.
9) I need a keyed entry handleset for a 1-3/4 inch door but I do not need solid brass. What are the simpler options?
The Emtek 4811 is a solid brass handleset with a Schlage C keyway as standard and a Weiser WR5 keyway option, ordered with a separately chosen interior knob or lever from the Emtek brass range. If the brass body and the trim selection are not needed, the Schlage Residential F60 Addison single cylinder keyed entry handleset ships with the Accent lever already paired, is Grade 2, and covers 1-3/8 to 1-3/4 inch doors. The Kwikset 687AMD Amador and 687BW Belleview single cylinder handlesets are Grade 3 for 1-3/4 inch doors and are supplied as exterior trim only, so interior trim is ordered separately. The Master Lock HDLBA0615/4D is a Grade 2 single cylinder deadbolt handleset.
10) Which handlesets look like a substitute for the Emtek 4811 but will not work on a keyed entry door?
The Emtek 4811 is a keyed single cylinder entry handleset. Several handlesets in the same body style are not keyed entry sets and will not lock the opening. The Weslock 6695 Belmont with Impresa knob and the Weslock 2815 Hillcrest with New Heaven lever are both dummy function, meaning fixed trim with no latch. The Schlage Residential JE285 Barcelona with Seville lever is a non-keyed entry function set, and the Schlage JI18/19 with Torino lever is a passage lock paired with a separate keyed deadbolt rather than a keyed handleset. The Yale BYRD256 CBARX pairs a key free touchscreen deadbolt with a Ridgefield passage handleset, so the handle itself is not keyed.
11) What is the difference between the Emtek 4811 and a mortise entry handleset like the Baldwin Estates 6542 Tremont?
The Emtek 4811 is a tubular handleset with a 2-1/8 inch cross bore, a 2-3/8 or 2-3/4 inch backset, and a 5-1/2 inch center-to-center prep, so it goes into standard bored door prep. The Baldwin Estates 6542 Tremont single cylinder entry mortise trim, and its double cylinder counterpart, are mortise trim for a 1-3/4 inch door and require a mortise pocket routed into the door edge. If the door is already bored for a tubular set, the 4811 matches that prep; a door already pocketed for a mortise lock takes the Baldwin trim. Both are entrance function.
12) I need to key a new handleset into an existing Kwikset SmartKey system. Is the Emtek 4811 the right choice?
The Emtek 4811 ships with a Schlage C keyway as standard, with a Weiser WR5 cylinder available at no upcharge so it can be keyed into an existing Weiser system. For a SmartKey system, the Kwikset 687AMD Amador single cylinder handleset uses SmartKey, and the 687AMD-SMC version pairs SmartKey with the SC1 keyway; both are Grade 3 exterior trim only. The Kwikset 687BW Belleview also uses SmartKey. If the building is standardized on Schlage C or Weiser WR5, the 4811 keys into those systems directly.
13) I want an interconnected handleset so one turn retracts both latch and deadbolt. Is the Emtek 4811 that?
The Emtek 4811 is a single cylinder entry handleset that can be ordered with the Emtek 443 Interconnect Device, and handing must be specified when an interconnect device is used. The interconnect option is not available with a double cylinder or EMPowered upgrade. If a factory interconnected set is preferred instead, the Schlage Residential JI18/19 is an interconnected passage lock with keyed deadbolt and Torino lever in satin stainless steel, Grade 2, for 1-3/8 to 1-3/4 inch doors. Note its handle function is passage, with the keying carried by the deadbolt, while the 4811 is keyed at the handleset itself.
14) Is the Emtek 4811 single cylinder handleset key on both sides or thumbturn inside?
Single cylinder, so it is keyed from the outside and operated by a turn on the inside. That is the entry function most residential codes want on an egress door, since nobody needs a key to get out. If you specifically want key-both-sides for a door with glass beside it, a single cylinder set is the wrong choice and you want a double cylinder trim, such as the Baldwin Estates 6542 Tremont double cylinder entry mortise trim.
15) What is the Emtek 443 interconnect device and do I need it with the 4811?
The 443 interconnect is an option on the 4811 that ties the inside lever or knob to the deadbolt so one motion retracts both. It is what you add when you want single-motion egress on an entry door. Two conditions come with it: handing must be specified, and it is not available with a double cylinder configuration or the EMPowered electronic upgrade. If a single-motion release is not a requirement for your opening, order the 4811 without it.
16) Is the Emtek 4811 handleset rated for a commercial building or apartment entry?
Emtek lists the 4811 as residential. It is solid brass with a tubular lock body and it suits single-family, condo and townhome front doors. For a multi-family or light commercial opening where a graded lock is being specified, look at a Grade 2 handleset instead: the Schlage Residential F60 Addison keyed entry handleset with Accent lever is Grade 2 and covers 1-3/8 to 1-3/4 inch doors, and the Master Lock HDLB Series single cylinder deadbolt handleset is also Grade 2.
17) I want keypad or smartphone entry instead of a key. What replaces the Emtek 4811?
The Emtek 4811 is a non-electronic keyed handleset with a Schlage C or Weiser WR5 cylinder. For keypad or app entry in a handleset form, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs Halifax lever interior trim with a Contemporary SmartCode keypad electronic deadbolt with SmartKey, and ships with the RCAL latch and RCS strike for 1-3/4 inch doors. The Yale Real Living BYRD226CBARX Assure Lock adds Wi-Fi and Bluetooth touchscreen operation with the Ridgefield handleset, and the BYRD226NRRX is the standalone touchscreen version of the same set with no network connection; both cover 1-3/4 to 2-1/4 inch doors.
18) Does the Emtek 4811 or an alternative fit a 1-3/8 inch door?
The Emtek 4811 covers doors from 1-3/8 inch up to 2 inch, so a 1-3/8 inch door is within range, with the standard latch at 2-3/8 inch backset and 2-3/4 inch available. Alternatives that also reach down to 1-3/8 inch include the Pamex FS7P31 Lexington single cylinder handleset in satin nickel at 1-3/8 to 1-3/4 inch, the Schlage F60 Addison at 1-3/8 to 1-3/4 inch, the Deltana Montego 810871 at 1-3/8 to 2 inch, and the Weslock 2810 Hillcrest at 1-3/8 to 2 inch. The Kwikset 687AMD Amador and 687BW Belleview are listed for 1-3/4 inch doors, so they are the ones to rule out on a 1-3/8 inch door.
19) What finishes does the Emtek 4811 Arts & Crafts handleset come in, and will it match the rest of my hardware?
Four finishes are made: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), and Unlacquered Brass (US3NL). All four are available with either the Schlage or Weiser cylinder. Unlacquered brass is bare brass and will patina with handling rather than staying bright, so pick that one deliberately if you are matching a set of already-aged hardware, and pick a plated finish if you want it to stay put. Split finish is available if you need the exterior to match the door and the interior to match the room.
20) I need matching handlesets on several doors, but only one needs to lock. Does Emtek's 4811 have a dummy version?
The 4811 is a keyed entry handleset only, so every one you order is a working lock. For an inactive leaf or a French door slave panel where you want the same plate with no lock, a dummy handleset is the right part: Weslock makes the 6695 Belmont dummy with the Impresa knob and the 2815 Hillcrest dummy with the New Heaven lever, both for 1-3/8 to 2 inch doors. If you want the active door unlocked but styled to match, the Schlage Residential JE285 Barcelona handleset with Seville lever is a non-keyed entry function.
How fast can I get the Emtek 4811-US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 4811-US15 come with a warranty?
Absolutely. The Emtek 4811-US15 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 4811-US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 4811-US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Product Reviews

  • 5
    I love Emtek!

    Posted by Nick Strachan on Jul 18th 2024

    Love the style of this handleset

!