Emtek 4801 Arts & Crafts Dummy Entrance Handleset - Brass Tubular

It covers 1-3/8 inch through 1-3/4 inch doors, which spans the common interior slab and the standard 1-3/4 inch exterior door. There's a door thickness field on the order so you can state exactly what you have. Thicker than 1-3/4, look at the Weslock 2815 Hillcrest dummy handleset, which is listed for 1-3/8 to 2 inches.

Handing matters when a lever is used for the inside trim, since a lever has to point toward the latch edge. Right hand and left hand are both offered, so determine your hand at the door before ordering. If you pick a knob for the interior, the hand is not a styling issue, but the order still asks for it.

The grip is 5-1/2 inch center to center between the upper and lower rosettes. If the handleset you're removing shares that CTC, the mounting will land in the same area; anything with a different spread will leave holes to fill. Since the 4801 is surface mounted, new fastener locations are drilled rather than worked into an existing bore.

It ships as a complete set. You choose the inside trim when you order from Emtek's brass knob and lever range, including the Arts & Crafts Lever, Hammered Lever, Spoke Knob, Octagon Knob, Windsor Crystal Knob and dozens more. Nothing extra to order for the inside.

The Emtek 4801 Arts and Crafts is a dummy function handleset in brass, surface mounted with no door prep required. Two other dummy handlesets are the Weslock 6695 Belmont Dummy Handleset with Impresa Knob and the Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever, both of which cover a 1-3/8 inch to 2 inch door thickness range. The Emtek 4801 covers 1-3/8 inch to 1-3/4 inch doors and lets you choose the inside knob or lever separately, while the Weslock sets pair with a fixed interior trim style.

The Emtek 4801 Arts and Crafts is non-keyed with a dummy lock function, so it has no latch or cylinder. For a keyed opening, keyed entry handlesets include the Schlage Residential F60 Addison Single Cylinder Keyed Entry Handleset with Accent Lever, a Grade 2 set for 1-3/8 inch to 1-3/4 inch doors, and the Pamex FS7P31 Lexington Single Cylinder Handleset, also rated for 1-3/8 inch to 1-3/4 inch doors. Both cover the same door thickness range as the 4801.

The Emtek 4801 Arts and Crafts is specified for 1-3/8 inch to 1-3/4 inch doors. For a 2 inch door, the Deltana 810871 Montego Handleset covers 1-3/8 inch to 2 inch, and the Weslock 2810 Hillcrest Single Cylinder Handleset with Hudson Knob covers 1-3/8 inch to 2 inch. For thicker still, the Weslock 1411 Traditionale Colonial Handleset with Eleganti Knob covers 1-3/4 inch to 2-1/4 inch.

Four: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), and Unlacquered Brass (US3NL). Unlacquered brass will patina over time, which is usually the point on an Arts and Crafts opening. There's also a split finish option if you want the exterior grip in one finish and the interior trim in another to match what's already inside the house.

It's built for residential use, and as a dummy it provides no security or latching at all. For a commercial opening you want a graded keyed handleset or lockset; among residential-grade options we carry, the Schlage F60 Addison keyed entry handleset is Grade 2, and the Master Lock HDLB Series single cylinder deadbolt handleset is also Grade 2.

The 4801 itself is dummy only. If the pair has to match exactly, order the keyed Arts & Crafts handleset from the same Emtek brass family in the same finish. Cross-brand, a dummy that pairs with a keyed sibling is the Weslock 6695 Belmont dummy handleset, and on the Weslock Premiere Essentials side the 2815 Hillcrest dummy runs alongside the 2810 Hillcrest single cylinder handleset.

The Emtek 4801 Arts and Crafts is a brass tubular handleset. Other solid brass handlesets include the Deltana 803871B Hanover, the Deltana 815871 St. Ann, and the Deltana 825871 Kingston, all entry function. The difference to note is function: the Emtek 4801 is a dummy, while those three are entry sets.

They are different animals. The Emtek 4801 Arts and Crafts is a tubular handleset that surface mounts with no door prep. The Baldwin Estates 6542 Tremont entry mortise trim is trim for a mortise lock body on a 1-3/4 inch door, offered in single cylinder and double cylinder versions, and requires a mortise pocket in the door. Choose the mortise trim only if the door is already prepped for a mortise lock.

No - the Emtek 4801 Arts and Crafts is non-electronic and dummy function. For keypad or smart openings, the Kwikset 815SCEHFL-CP913CNT San Clemente Handleset pairs a Halifax lever trim with a Contemporary SmartCode electronic deadbolt for 1-3/4 inch doors, and the Yale Real Living BYRD226CBARX Assure Lock Wi-Fi Bluetooth Touchscreen Deadbolt with Ridgefield Handleset covers 1-3/4 inch to 2-1/4 inch doors.

The Emtek 4801 Arts and Crafts is surface mounted with no door prep, so backset does not apply. If you are prepping a door and need backset flexibility, the Sure-Loc Aspen AN507 keyed entry handleset, the Sure-Loc Alta AT507 tubular handleset, the Sure-Loc Coral CR507, and the Sure-Loc Madison MA507 keyed entry handleset all come with an adjustable backset.

The Emtek 4801 Arts and Crafts is sold as a complete set with an inside knob or lever selected at order. If you need an exterior half only, the Kwikset 687AMD Amador single cylinder handleset is offered exterior only in both SmartKey SMT and SC1 keyway SmartKey versions, Grade 3, for 1-3/4 inch doors.

The Emtek 4801 Arts and Crafts is ordered with any Emtek brass knob or lever for the inside trim and is sold as a complete set, but it is non-keyed. If you want a keyed exterior with knob inside trim, the Baldwin Wesley Handleset x Alcott Knob and the Baldwin Wesley Handleset x Carnaby Knob are entrance function sets offered as matched handleset and knob combinations.