Emtek 4820 Baden Single Cylinder Entrance Handleset - Brass Tubular

Tubular. It goes into a standard 2-1/8 inch cross bore with an edge bore for the latch, which is what most residential doors already have, so no mortise pocket has to be routed into the door edge. Mortise trim like the Baldwin Estates 6542 Tremont requires a mortise-prepped door and is listed for 1-3/4 inch thickness. If the door is already bored for a tubular lockset, the Baden is the direct path.

Standard cylinder on the 4820 Baden is a Schlage C keyway. A Weiser WR5 keyway version is also offered (product code prefixed with W, no upcharge for the cylinder substitution) and can be keyed into an existing Weiser system. Keying is specified at order: keyed different or keyed alike, and there is a field for keying to a specific code if you are matching a bitting you already run.

Handing is required whenever a lever is chosen for the inside trim, since the lever has to fall toward the latch edge. Right hand and left hand are both offered. If you pick a knob for the interior instead, the trim is symmetrical, but handing is still collected on the order so the set ships correct for your opening. Stand outside the door: hinges on the right is right hand.

Same Baden brass tubular handleset, three functions. The 4820 is single cylinder: key outside, thumbturn inside. The 4830 is double cylinder, keyed both sides, which is what people specify when there is glass next to the door. The 4810 is a dummy, no latch or cylinder, used on an inactive leaf of a pair or a fixed door. Pick 4820 for a normal keyed entry.

It is a residential product, solid brass tubular construction, no ANSI grade behind it. For a commercial opening or a multi-family common door, look at a graded set instead: the Schlage Residential F60 Addison is a Grade 2 single cylinder keyed entry handleset, and the Master Lock HDLB Series single cylinder deadbolt handleset is also Grade 2. Use the Baden where the look matters and the traffic is house-level, like unit front doors and executive suites.

The Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs a Halifax lever interior trim with a contemporary SmartCode keypad electronic deadbolt for 1-3/4 inch doors. On the Yale Real Living side, the BYRD226NRRX Assure Lock is a standalone touchscreen deadbolt with Ridgefield handleset for 1-3/4 inch to 2-1/4 inch doors, and the BYRD226CBARX adds Wi-Fi and Bluetooth over the same thickness range. The Emtek 4820 Baden is a non-electronic mechanical handleset, so moving to any of these changes the door from key-only to credential-based operation.

The Deltana Hanover 803871B, St. Ann 815871, and Kingston 825871 are all solid brass entry-function handlesets, the same material and function as the 4820 Baden, which is brass with an entry lock function. The Deltana sets are sold as complete style-specific handlesets, while the 4820 Baden is ordered with the inside knob or lever chosen separately, so an equivalent order means picking a Deltana style you are satisfied with as a fixed pairing.

The Weslock 1411 Traditionale Colonial handleset with Eleganti knob is a single cylinder keyed entry handleset rated for 1-3/4 inch to 2-1/4 inch doors, and the Weslock 2810 Hillcrest with Hudson knob is single cylinder for 1-3/8 inch to 2 inch doors. The Deltana Montego 810871 covers 1-3/8 inch to 2 inch as well. On an Emtek 4820 Baden order, door thickness is entered as an option at the time of order rather than picked from a fixed range.

The Schlage Residential F60 Addison keyed entry handleset with Accent lever is Grade 2 and fits 1-3/8 inch to 1-3/4 inch doors, and the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is also Grade 2. The Kwikset 687AMD Amador and 687BW Belleview single cylinder handlesets are Grade 3 for 1-3/4 inch doors. The Emtek 4820 Baden is a residential-classified brass handleset, so where a written grade is part of the submittal the Schlage or Master Lock sets answer it directly.

No. The Baldwin 6542 Tremont is entry mortise trim, offered single cylinder as BAL-6542ENTR and double cylinder as BAL-6542DBLC, for 1-3/4 inch doors, and it mounts to a mortise lock body prepared into the door edge. The Emtek 4820 Baden is a tubular lock using standard 2-1/8 inch bored door prep with a 2-3/8 inch or 2-3/4 inch backset latch. Swapping between them means changing the door prep, not just the trim.

Sold as a complete set. The latch and strike plate are included, so the only extra decision is the interior knob or lever style, which is required at order and is not a separate line item. Nothing else is needed to hang it on a prepped door.

Yes, and it is a required selection. The Baden exterior plate pairs with any Emtek brass knob or lever for the inside trim, from plain forms like the Round, Egg, and Square knobs through crystal options such as Windsor and Georgetown, and levers including Milano, Rope, Ribbon and Reed, Athena, and Stuttgart. That is how you match the handleset to the passage and privacy sets already on the rest of the house.

Eight finishes on the Baden 4820: Oil Rubbed Bronze (US10B), Polished Nickel Lifetime (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL), Satin Brass (US4), and French Antique (US7). All eight are available with either the Schlage or the Weiser cylinder. If you want the exterior plate in one finish and the interior trim in another, there is a split finish field on the order.

The Baden 4820 is a tubular brass set with a 5-1/2 inch center-to-center and a stated 2-1/8 inch bore, and the interior trim is chosen from Emtek's own knob and lever range. The Weslock 2810 Hillcrest with Hudson knob and the Weslock 1411 Traditionale with Eleganti knob ship as fixed handle-and-knob pairings, and the Weslock 1411 is listed for 1-3/4 to 2-1/4 inch doors while the 2810 covers 1-3/8 to 2 inches. Deltana's Hanover, St. Ann, and Kingston are solid brass entry handlesets in the same vein. Choose Baden when you want to dictate the interior trim; choose a fixed pairing when you just need the set.

There is a door thickness field on the order, so state the actual thickness if your door is anything other than a standard 1-3/4 inch entry door. That, plus the backset (2-3/8 or 2-3/4 inch) and the hand, are the three fit details that decide whether the set works out of the box.

The Schlage Residential JE285 Barcelona style handleset with Seville lever is a non-keyed entry function handleset for 1-3/8 inch to 1-3/4 inch doors. For a fixed inactive leaf, the Weslock 6695 Belmont with Impresa knob and the Weslock 2815 Hillcrest with New Heaven lever are both dummy handlesets covering 1-3/8 inch to 2 inch doors. Emtek's own dummy version of the Baden trim is product code 4810.

The Kwikset 687AMD Amador is a single cylinder keyed entry handleset for 1-3/4 inch doors, but both the 687AMD-S and 687BW Belleview are exterior-only trim, so no inside knob or lever comes with them. The Emtek 4820 Baden is sold as a complete set with latch and strike plate, and the inside knob or lever is chosen as part of the order. If you need the whole door outfitted in one line, the exterior-only Kwikset sets will leave the interior side to source separately.

The Emtek 4820 Baden can be ordered with the Weiser WR5 keyway by adding W to the product code, at no upcharge for the cylinder substitution, and it can be keyed into an existing Weiser system. Among the comparables, the Kwikset 687AMD SMC Amador uses an SC1 keyway with SmartKey, and the 687AMD SMT and 687BW Belleview are SmartKey handlesets. Confirm which keyway family the existing system runs on before you pick, since the Baden ships Schlage C by default.

The Baldwin Wesley is sold as a fixed handleset and knob pairing, catalogued as Wesley x Alcott knob and Wesley x Carnaby knob, both entrance function. The Emtek 4820 Baden is entry function as well but the interior knob or lever is selected at the time of order from Emtek's brass trim range, and handing is specified when a lever is used inside. If your job wants one preset combination, the Wesley sets are that; if you are matching interior trim across a house, the Baden lets you set it.

Emtek's double cylinder version of the Baden trim is product code 4830, keyed on both sides of the same brass handleset. From another brand, the Baldwin Estates 6542 Tremont double cylinder entry mortise trim covers the same requirement for 1-3/4 inch doors, though it needs mortise prep rather than the 2-1/8 inch bored prep the Baden uses. Check local egress code for the opening before specifying double cylinder either way.

The Pamex FS7P31 Lexington is a single cylinder handleset in satin nickel for 1-3/8 inch to 1-3/4 inch doors, sold as one configuration rather than built up from trim choices. The Weslock 2810 Hillcrest with Hudson knob is another single cylinder set, covering 1-3/8 inch to 2 inch doors. Both ship as a fixed combination, where the Emtek 4820 Baden asks for inside trim, handing, backset, and keying selections on every order.

The Yale Real Living BYRD256 CBARX pairs a key-free touchscreen deadbolt with a Ridgefield passage handleset and trim, connected by August over Wi-Fi, for 1-3/4 inch to 2-1/4 inch doors. The BYRD256CBARX is an Assure Lock 2 key-free touchscreen deadbolt with Wi-Fi and Ridgefield handleset for 1-3/8 inch to 2-1/4 inch doors. Both change the exterior grip to Yale's Ridgefield style; the Emtek 4820 Baden keeps a keyed brass cylinder as the only means of entry.

It serves a different opening. The Schlage Residential JI18/19 is an interconnected passage lock with keyed deadbolt and Torino lever, Grade 2, for 1-3/8 inch to 1-3/4 inch doors, and its lock function is passage with the security coming from the separate deadbolt. The Emtek 4820 Baden is a single cylinder entry handleset where the key operates the lock itself. Use the JI18/19 where a single-motion egress interconnect is wanted; use the Baden where a keyed entry handleset with a grip is the design.