Emtek 5358 Annapolis Single Point Lockset - Brass Tubular - Dummy, Pair

It is a dummy, non-keyed trim only. There is no latch, no bolt and no operating mechanism, so the knob or lever is fixed and serves as a pull. Use it on closet doors, pantry doors, false doors, or the inactive leaf of a pair where the door is held by a ball catch or roller catch you supply separately.

The Annapolis 5358 ships as a pair, meaning trim for both faces of the door. If you only need one side, this is not the part for you.

No door prep is needed. The 5358 is surface mount, fastened with the supplied 1 inch wood screws and threaded tubes with machine screws, so it goes onto a blank door face without a cross bore or edge bore.

Seven choices: Cortina Lever, Egg Knob, Providence Knob, Rope Knob, Rope Lever, Waverly Knob, and the Modern Key in Knob/Lever, which is specified by comment rather than picked from the list. Rope Knob and Rope Lever are not made in Satin Brass (US4), Polished Nickel Lifetime (US14) or Flat Black (US19).

Only if you pick a lever. Handing is required on leversets, so the Cortina Lever, Rope Lever or a Modern lever needs left or right called out. The Egg, Providence, Rope and Waverly knobs are handing neutral.

The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates, built on a 5-1/2 inch center to center spacing, and it carries a double dummy function. Like the Emtek 5358 Annapolis, which is a brass tubular dummy pair, it puts non-operating trim on both faces of the door, so it suits closet pairs, French door inactive leaves, and similar openings where nothing needs to latch. The difference is in the trim program: the Annapolis 5358 is ordered with a knob or lever style such as the Cortina Lever, Providence Knob, Egg Knob, or Waverly Knob, while the Omnia comes as a lever set.

The 5358 Annapolis is a dummy, non-keyed set, so it will not secure anything. For a keyed opening in a similar sideplate look, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, keyed on the outside with a thumbturn inside. If the door is a glass-panel or sidelite entry where you want a key on both faces, the Omnia D12036AC is the double cylinder version with a sideplate design. Both replace the dummy trim with an actual working deadbolt.

Yes. Hollow core fasteners are supplied on request, so specify hollow core when you order if that is what you are mounting to. On solid wood the standard 1 inch wood screws are what you use.

Ten finishes: Flat Black (US19), French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15) and Unlacquered Brass (US3NL). For brass matching, Unlacquered Brass will patina over time while Polished Brass Lifetime is coated to stay bright, so pick the one that matches how your existing trim behaves.

No. The Annapolis 5358 is a residential product, solid brass tubular trim in an American Classic styling. For office, school or multi-family corridor doors you want a commercial grade bored or mortise lock instead.

The Omnia D12036PD is a solid brass double dummy lever lockset with plates on a 5-1/2 inch center to center spacing. It gives you the same non-functioning pull on both faces in brass, with the plate layout Omnia uses. If the same opening later needs to actually lock, Omnia builds the D12036A as a single cylinder version and the D12036AC as a double cylinder.

No. The Omnia D12036A is a single cylinder deadbolt lever lockset, so it is a working keyed unit, while the Emtek 5358 Annapolis is a dummy pair with no keying and no latching at all. They look related because both are sideplate-style brass lever sets, but substituting the D12036A onto a closet or inactive French door leaf gives you a cylinder and a bolt nobody wants there, and substituting the 5358 onto an entry leaves the door unsecured. Match on function first.

The Emtek 5358 Annapolis dummy pair is surface mount and requires no door prep, fastening with 1 inch wood screws plus threaded tubes and machine screws, and it covers doors 1-3/8 inch to 1-3/4 inch thick. The Omnia D12036PD is a dummy deadbolt lever lockset with plates laid out on 5-1/2 inch centers, so the plate footprint and fastener spacing follow that dimension. On a hollow-core or previously unbored slab, the surface-mount Annapolis is the one that goes on without cutting.

Yes, a split finish can be requested when ordering the 5358. There is an optional split finish field at order entry, and a door thickness note field alongside it.

They will. Any of the Key in Knob/Lever styles offered here can be paired with the Modern Rectangular trim style, with some finish limitations depending on the combination you pick.