Emtek 7057 Sandcast Bronze #5 7-1/4" Non-Keyed Sideplate Tubular Lockset, Dummy (Pair)

It's a dummy, non-keyed function, so there's no latch action and no key. The 7057 is fixed trim used for pulling a door open or closed, typical on an inactive leaf of a double door, a closet, or a pantry. If you need the door to hold shut you need a passage, privacy, or keyed function instead.

Yes, the stated range is 1-3/8 inch to 1-3/4 inch, which covers both the common older interior door and standard 1-3/4 inch stock. Door thickness is a field you can enter when ordering.

Handing is a required selection on the 7057 because the lever styles are handed, so the lever has to sweep the correct way on your door. Choose Right Hand (RH) or Left Hand (LH). If you order a knob instead, you still make the selection on the order form, but the knob itself is symmetrical.

The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates on a 5-1/2 inch center to center spacing, and it carries a double dummy function. The Emtek 7057 is also a dummy function sideplate lockset, built in sandcast bronze on a 7-1/4 inch sideplate and sold as a pair. So the two differ in plate length and center to center layout, and in material - sandcast bronze versus solid brass - while both give you non-latching trim on both faces of the door.

A dummy set has no latch or bolt mechanism, so it will not secure an opening. For a locking sideplate lever set, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, and the Omnia D12036AC is the double cylinder version with a sideplate design. Choose single cylinder where a thumbturn on the inside is acceptable and double cylinder where the opening calls for key operation on both faces.

It ships as a pair, so you get trim for both faces of the door. That makes it the right choice for the inactive leaf of a set of double doors where both sides are visible. If only one face needs trim, a pair leaves you with a spare side.

Any Sandcast Bronze knob or lever style, and there are 25 to choose from. Levers include Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton and Yuma. Knobs include Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence. That lets you match the 7057 dummy to the active leversets elsewhere in the same house.

Three: Flat Black Bronze (FB), Medium Bronze (MB) and Tumbled White Bronze (TWB). These are the Sandcast Bronze collection finishes, so the dummy will tone-match other Sandcast Bronze trim on the same openings. Sandcast bronze finishes vary piece to piece by nature of the casting.

7-1/4 inches, the #5 plate size in the Sandcast Bronze line. Worth checking against your stile before you order, since a plate this long needs a reasonably wide rail of flat wood to sit on and won't suit a narrow glazed-door stile.

It's a residential-duty product, cast bronze trim in a tubular lock platform. For a commercial corridor or a high traffic institutional opening you want a Grade 1 or Grade 2 cylindrical or mortise lockset instead, not a residential sandcast dummy.

No - they are not interchangeable functions. The Omnia D12036A is a single cylinder deadbolt lever lockset, so it operates a bolt and takes a key. The Emtek 7057 is a non-keyed dummy pair with no working mechanism. Swapping one for the other changes both the door prep required and what the opening does, so match on function first before comparing plate styling.

The Emtek 7057 is sandcast bronze, offered in Flat Black Bronze, Medium Bronze and Tumbled White Bronze, and it takes any Sandcast Bronze knob or lever style for the inside trim. The Omnia D12036A, D12036AC and D12036PD are solid brass construction. Sandcast bronze gives a textured, hand-cast surface suited to a rustic scheme, while solid brass is a smoother cast product - pick based on the finish family the rest of the openings are carrying.

No. It's a mechanical dummy trim set with no electronics, no keyway, and nothing to wire or program. Nothing to add to an access control schedule.