Emtek 7675 Sandcast Bronze #5 5-1/2" Keyed Sideplate Tubular Lockset, Dummy (Pair)

It is trim only. The 7675 is a dummy function set, non-keyed, with no latch and no working cylinder. The knobs or levers are fixed and do not turn a bolt. Use it on a door held shut by a roller catch, ball catch, or magnetic catch, or on the inactive leaf of a pair. If you need it to latch or lock, you need a passage, privacy, or keyed entry version instead.

No door prep is needed. The 7675 is surface mount, so the sideplates screw to the face of the door rather than dropping into a 2-1/8 inch bore and a latch cross-bore. That makes it a clean choice for a solid or previously undrilled door, and it also means it will not hide the holes from an old bored lockset if you are covering an existing prep.

Handing is required because of the lever, not the latch. Levers are cast to sweep one way, so a right hand lever on a left hand door points the wrong direction. The order asks for Right Hand or Left Hand. If you choose one of the knob styles instead, the knob is symmetrical and handing is not a functional concern.

The Emtek 7675 is a dummy function set, so it is non-keyed and does not latch or lock; it is surface mounted with no door prep and serves as fixed pull trim. For an opening that has to secure, the Omnia D12036AC is a double cylinder deadbolt lever lockset in solid brass with a sideplate design, and the Omnia D12036A is the single cylinder deadbolt version of the same lever lockset. Single cylinder takes a key outside with a thumbturn inside; double cylinder is keyed from both sides, which is a consideration on doors with glass.

5-1/2 inches is the center to center spacing on the sideplate, the distance between the knob or lever center and the upper cylinder position on the plate. On the dummy version there is no working cylinder, but the plate keeps the same 5-1/2 inch layout so it visually matches the keyed and deadbolt-equipped sideplates elsewhere in the Sandcast Bronze line.

It ships as a pair, one sideplate assembly for each face of the door, and the knobs or levers are included in the set. You are not buying trim and sourcing handles separately. You do need to specify the knob or lever style, since the plate can be ordered with any of the Sandcast Bronze designs.

Ten lever designs and fifteen knob designs. Levers: Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton, Yuma. Knobs: Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town, Providence. Picking the same style you used on the working locks in the house is how the dummy leaf ends up matching the rest.

It is catalogued as residential. Emtek's Sandcast Bronze line is built for homes and rustic residential interiors rather than high traffic commercial openings. For a school, office, or multi-family corridor door, specify a commercial bored or mortise lockset instead.

The Omnia D12036PD is a solid brass double dummy lever lockset with sideplates on a 5-1/2 inch center to center layout, so it matches the Emtek 7675 in spacing and in being a non-functioning pair. The difference is material and look: the Omnia is solid brass with a smoother machined appearance, while the Emtek is sandcast bronze with a rustic texture.

No. The 7675 carries no cylinder at all, so there is nothing to key. For a matching keyed opening in the same sideplate style you would order a keyed function set and have it keyed alike with your other doors.

That is one of its main uses. Since it is a dummy with no latch and mounts on the door face without prep, it gives the inactive leaf the same knob or lever and the same 5-1/2 inch sideplate as the active leaf, while the active leaf carries the working lock. Order the two leaves in the same finish and the same knob or lever style so the pair reads as a set.

The Emtek 7675 is part of the Sandcast Bronze collection with a bronze substrate, offered in Flat Black Bronze, Medium Bronze, and Tumbled White Bronze, and its inside trim can be ordered with any Sandcast Bronze knob or lever style - 25 choices including Durango, Teton, Winchester, and Old Town - so a pair of dummy doors can match the working hardware elsewhere in the same collection. The Omnia D12036PD, D12036A, and D12036AC are solid brass construction and specified as lever locksets. The Emtek 7675 is designated residential.

Three: Flat Black Bronze (FB), Medium Bronze (MB), and Tumbled White Bronze (TWB). These are living bronze finishes on a cast bronze body, so they will patina with handling and sun. Order every opening in a room from the same finish code at the same time if you want them to age together.